تعداد نشریات | 158 |
تعداد شمارهها | 6,210 |
تعداد مقالات | 67,468 |
تعداد مشاهده مقاله | 114,038,688 |
تعداد دریافت فایل اصل مقاله | 88,779,482 |
تعیین پارامترهای تعادلی و ضریب نفوذ موثر نرمال پارافین های سبک در فاز مایع ، در غربالهای مولکولی 5A | ||
نشریه دانشکده فنی | ||
مقاله 5، دوره 57، شماره 0 - شماره پیاپی 1000184، خرداد 1375 اصل مقاله (420.26 K) | ||
نویسندگان | ||
مهندس شهره فاطمی؛ مهندس ایرج شعاعی* | ||
چکیده | ||
یکی از پارامترهای لازم جهت شبیه سازی و طراحی واحدهای جذب سطحی تعیین ضریب نفوذ موثر ماده جذب شونده به درون حفرات جاذب می باشد ضریب نفوذ موثر به دو عامل ضریب نفوذ مولکولی ماده و فاکتور پیچیدگی جاذب بستگی دارد فاکتور پیچیدگی یک جاذب به ساختمان کریستالی و شکل حفرات داخلی آن بستگی دارد و برای هر نوع جاذب مقداری مخصوص به خود است که برای تعیین آن باید از اطلاعات آزمایشی بهره گیری کرد . درمقاله حاضر مدل ریاضی جذب سطحی در سیستم ناپیوسته برای جذب تک جزئی در دمای ثابت در شرایط زیر نوشته شده است : دانه های جذب کروی و همگن هستند مکانیسم نفوذ ماده به داخل حفرات از نوع نفوذ حفره ای می باشد و میان سیال داخل حفرات و فاز جذب شده تعادل برقرار است و ارتباط غلظتها در فاز جذب و سیال داخل حفره در این حالت با کمک مدل تعادلی "لانگمیر" بیان شده است بطوریکه پارامترهای ایزوترم لانگمیر با تطبیق اطلاعات آزمایشی برای نرمال پارافینهای C5 تاC7 در فاز مایع بدست آمده است . مدل جذب به روش عددی تفاضلهای محدود غیر صریح حل شد که نتیجه حل مدل تعیین تغییرات غلظت نرمال پارافین در توده سیال بر حسب زمان می باشد مجهول این مدل ضریب نفوذ حفره ای و ضریب انتقال جرم فیلمی می باشد که هدف تعیین کردن آنهاست به این وسیله با تطبیق نتایج حاصل از مدل و نتایج حاصل از آزمایش ضریب نفوذ موثر ماده به درون حفرات تعیین می گردد و در نتیجه می توان فاکتور پیچیدگی غربال مولکولی 5A را بدست آورد روش ارائه شده روشی است کلی که می توان به وسیله آن فاکتور پیچیدگی را برای انواع جاذبهای مختلف تعیین کرد . | ||
عنوان مقاله [English] | ||
Determination of Equilibrium Parameters and Effective Pore Diffusion Coefficient of Light and Liquid N-Paraffins on SA Molecular Sieves. | ||
چکیده [English] | ||
The molecular sieves are selective adsorbents. They can adsorb some kind of molecules that are different in size or shape from the others. In separation of n-paraffins from iso-paraffins and aromatics, SA molecular sieve is the suitable adsorbent, and can adsorb n-paraffins to separate them from other hydrocarbons. In this paper equilibrium isotherms of n-CS, n-C6 and n-C7 from an inert solvent, benzen (non adsorbed), on SA molecular sieves, was determined, for single component adsorption. The experimental data was conducted on the Langmuir Isotherm and the parameters of this model were determined. On the other hand , the kinetics of adsorption of n-C6 and n-C7 have been determined in the finite bath experiments; and the concentration profile of each component versus time was determined. The batch adsorption model based on pore diffusion model had been written and calculated numerically. There were film and pore diffusion resistances against the n-parrfin adsorption, and also there was local equilibrium between the pore fluid and the solid phase. The equilibrium model was based on the Langmuir Isotherm. By super position of batch adsorption model onto finite bath experiments, the tortousity factor of adsorbent structure and the film mass transfer were estimated. By determination of tortousity factor , the pore diffusion coefficient of each component was calculated. This procedure is a general method to determine the effective pore diffusion coefficient of any component into the adsorbents. | ||
آمار تعداد مشاهده مقاله: 2,376 تعداد دریافت فایل اصل مقاله: 941 |