سامانه پشتیبانی خدمات اطلاعات

  اخبار و اعلانات

 آمار

تعداد نشریات161
تعداد شماره‌ها6,572
تعداد مقالات71,031
تعداد مشاهده مقاله125,501,088
تعداد دریافت فایل اصل مقاله98,764,333
Mikaeil, Reza, Ghadernejad, Saleh, Ataei, Mohamad, Esmailvandi, Mahmoud, Daneshvar, Abdolsalam. (1396). Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process. , 51(2), 125-132. doi: 10.22059/ijmge.2017.214404.594626
Reza Mikaeil; Saleh Ghadernejad; Mohamad Ataei; Mahmoud Esmailvandi; Abdolsalam Daneshvar. "Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process". , 51, 2, 1396, 125-132. doi: 10.22059/ijmge.2017.214404.594626
Mikaeil, Reza, Ghadernejad, Saleh, Ataei, Mohamad, Esmailvandi, Mahmoud, Daneshvar, Abdolsalam. (1396). 'Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process', , 51(2), pp. 125-132. doi: 10.22059/ijmge.2017.214404.594626
Mikaeil, Reza, Ghadernejad, Saleh, Ataei, Mohamad, Esmailvandi, Mahmoud, Daneshvar, Abdolsalam. Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process. , 1396; 51(2): 125-132. doi: 10.22059/ijmge.2017.214404.594626

Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process

International Journal of Mining and Geo-Engineering
مقاله 4، دوره 51، شماره 2، اسفند 2017، صفحه 125-132    اصل مقاله (589.5 K)
نوع مقاله: Research Paper
شناسه دیجیتال (DOI): 10.22059/ijmge.2017.214404.594626
نویسندگان
Reza Mikaeil1؛ Saleh Ghadernejad* 2؛ Mohamad Ataei3؛ Mahmoud Esmailvandi4؛ Abdolsalam Daneshvar4
1Department of Mining and Metallurgical Eng, Urmia University of Technology, Urmia, Iran
2School of Mining, College of Engineering, University of Tehran, Iran
3Faculty of Mining, Petroleum & Geophysics, Shahrood University of Technology, Shahrood, Iran
4School of Mining, College of Engineering, University of Tehran, Tehran, Iran
چکیده
This study aimed to develop new statistical models for evaluating the specific ampere draw (SI) based on rock brittleness index in rock sawing process. A variety of rocks, including carbonate and granite, were cut by a fully instrumented laboratory-sawing rig with two different types of circular diamond saws. Laboratory tests were performed at different depths of cut and feed rates. Multiple curvilinear regression analysis was utilized in order to estimate the SI from rock brittleness index and operational parameters. Validation of the developed models was checked by t and F tests. Results showed that among the different brittleness indexes, B3 has the best accuracy for both granite and carbonate rocks. Finally, it was concluded that the specific ampere draw can be reliably predicted using the proposed models for both hard and soft rocks.
کلیدواژه‌ها
Brittleness Indexes؛ Sawing Process؛ Specific Ampere Draw؛ Statistical Analysis
آمار
تعداد مشاهده مقاله: 665
تعداد دریافت فایل اصل مقاله: 736





سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب