پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,532 |
| تعداد مقالات | 70,501 |
| تعداد مشاهده مقاله | 124,099,087 |
| تعداد دریافت فایل اصل مقاله | 97,206,663 |
Efficiency of Washing Techniques for Removal of Heavy Metals from Industrial Sludge | ||
| Pollution | ||
| مقاله 15، دوره 5، شماره 1، فروردین 2019، صفحه 189-198 اصل مقاله (678.81 K) | ||
| نوع مقاله: Original Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/poll.2018.264574.507 | ||
| نویسندگان | ||
| Sumalatha J.1؛ Naveen B. P.* 2؛ Malik R. K.2 | ||
| 1Department of Civil Engineering, Ramaiah Institute of Technology, Bangalore-560054, India | ||
| 2Department of Civil Engineering, Amity School of Engineering and Technology Amity University Gurgaon, Haryana-122413, India. | ||
| چکیده | ||
| The effluent treatment plant sludge is one of the major sources of contamination with toxic metals. Since the sludge contains heavy metals, it must be pretreated to reduce the contamination. The heavy metals from the sludge can be reduced/ separated by washing it with a suitable leaching solution. In the present study, the efficiencies of three leaching solutions to remove the contaminants from an industrial sludge were studied and the leaching process was modeled. The leaching solutions used are 0.1 N HCl, 0.1 N EDTA and 0.1 N FeCl3. The efficiencies of leaching solutions were assessed by conducting column leaching experiments on the sludge and the migration rates of heavy metal ions of Cu, Zn, Ni, Cd, Pb, Fe and Cr present in the sludge were estimated. These migration rates are useful to estimate the quantity of leaching solution required at the site to achieve the required levels of concentrations in the sludge. | ||
| کلیدواژهها | ||
| Contaminants؛ Leaching solution؛ dispersion coefficient؛ Retardation factor | ||
| مراجع | ||
|
Akahane, I. Makino, T. Maejima, Y. Kamiya, T. Takano, H. Ibaraki, T. and Inahara, M. (2013). Remediation of Cadmium contaminated paddy soils by washing with ferric chloride (FeCl3): Effect of soil washing on cadmium concentration in soil solution and spinach, Japan Agricultural Research Quarterly, 47(3); 273-281.
Almani, Z.A. Pathan, A.F.H. and Memon, A.A. (2013). Heavy metal diffusion through soft clay under high hydraulic gradients. Mehran University Research Journal of Engineering and Technology, 32(2); 307-318.
Balasubramanian, J. Sabumon, P. C. Lazar, J. U. and Ilangovan, R. (2006). Reuse of textile effluent treatment plant sludge in building materials. Waste management, 26(1); 22-28.
Baskar, R. Begum, K. M. M. S. and Sundaram, S. (2006). Characterization and reuse of textile effluent treatment plant waste sludge in clay bricks. Journal of the University of Chemical Technology and Metallurgy, 41(4); 473-478.
Bilgin, M. and Tulun, S. (2016). Removal of heavy metals (Cu, Cd and Zn) from contaminated soils using EDTA and FeCl3. Global NEST J, 18; 98-107.
Farley, K.J. David, A.D. and Francois, M.M.M. (1985). A surface precipitation model for the sorption of cations on metal oxides, Journal of Colloid and Interface Science, 106(1); 226-242.
Gebreyesus, S. T. (2015). Heavy Metals in Contaminated Soil: Sources & Washing through Chemical Extractants. American Scientific Research Journal for Engineering, Technology, and Sciences, 10(1); 54-60.
Gitipour, S. Ahmadi, S. Madadian, E. and Ardestani, M. (2016). Soil washing of chromium-and cadmium-contaminated sludge using acids and ethylenediaminetetra acetic acid chelating agent. Environmental technology, 37(1); 145-151.
Gusiatin, Z. M. and Klimiuk, E. (2012). Metal (Cu, Cd and Zn) removal and stabilization during multiple soil washing by saponin. Chemosphere, 86(4); 383-391.
Kakati, J. P. Ponmurugan, P. Rajasekaran, N. and Gnanamangai, B. M. (2013). Effect of textile effluent treatment plant sludge on the growth metabolism of Green gram (Vigna radiata L). International Journal of Environment and Pollution, 51(1-2); 79-90.
Khalkhaliani, D. N. Mesdaghinia, A. R. Mahvi, A. H. Nouri, J. and Vaezi, F. (2006). An experimental study of heavy metal extraction, using various concentration of EDTA in a sandy loam soil. Pakistan Journal of Biological Sciences, 9(5); 837-842.
Ling, W. Shen, Q., Gao, Y. Gu, X. and Yang, Z. (2007). Use of bentonite to control the release of copper from contaminated soils. Australian Journal of Soil Research, 45(8); 618-623.
Ma, F. Zhang, Q. Xu, D. Hou, D. Li, F. and Gu, Q. (2014). Mercury removal from contaminated soil by thermal treatment with FeCl3 at reduced temperature. Chemosphere, 117; 388-393.
Martinez, C. E.and McBride, M. B. (1998). Coprecipitates of Cd, Cu, Pb and Zn in iron oxides: solid phase transformation and metal solubility after aging and thermal treatment. Clays and Clay minerals, 46(5); 537-545.
Mary Lissy, P. N. and Sreeja M.S. (2014). Utilization of sludge in manufacturing energy efficient bricks, IOSR Journal of Mechanical and Civil Engineering, 11(III); 70-73.
McLaughlin, M. J. Hamon, R. E. McLaren, R. G. Speir, T. W. and Rogers, S. L. (2000a). A bioavailability-based rationale for controlling metal and metalloid contamination of agricultural land in Australia and New Zealand. Soil Research, 38(6); 1037-1086.
McLaughlin, M. J. Zarcinas, B. A. Stevens, D. P. and Cook, N. (2000b). Soil testing for heavy metals. Communications in Soil Science & Plant Analysis, 31(11-14); 1661-1700.
Mulligan, C. N. Yong, R. N. and Gibbs, B. F. (2001). Remediation technologies for metal-contaminated soils and groundwater: an evaluation. Engineering Geology, 60(1); 193-207.
Ogata, A. and Banks, R. B. (1961). A solution of the differential equation of longitudinal dispersion in porous media: fluid movement in earth materials, Vol.411. US Government Printing Office.
Oustan, S. Heidari, S. Neyshabouri, M. R. Reyhanitabar, A. and Bybordi, A. (2011). Removal of heavy metals from a contaminated calcareous soil using oxalic and acetic acids as chelating agents. International Conference on Environment Science and Engineering IPCBEE, 8; 152-155.
Hirokazu, O. Shingo, I. Jian, P. Yanfeng, Z. Chunxiao, J. Hongwen, S. and Kensuke, F. (2010). Cadmium extraction from contaminated soil using an iron chloride solution in Asian countries. Sustainability in Food and Water, 417-424.
Patoczka, J. Johnson, R. and Scheri, J. (1998). Trace heavy metals removal with ferric chloride. Water Environment Federation Industrial Waste Technical Conference, Nashville, TN, 1-14.
Rajkumar, N and Hema, S. (2011). Reuse of textile ETP Sludge as Construction material, NBMCW October 2011.
Rowe, R. K. Caers, C. J. and Barone, F. (1988). Laboratory determination of diffusion and distribution coefficients of contaminants using undisturbed clayey soil. Canadian Geotechnical Journal, 25(1); 108-118.
Shivanath, G. Arumugam, E. and Murugesan, V. (2015). Utilization of industrial effluent treatment plant (ETP) sludge as partial replacement for cement in concrete. Journal of Industrial Pollution Control, 27(2).
Susset, B. and Grathwohl, P. (2002). Column leaching tests for groundwater risk assessment: concept, interpretation of results, and reproducibility. In Halm, D., Grathwohl, P. Groundwater Risk Assessment at Contaminated Sites, Proceedings of the 1st GRACOS workshop, Tübingen, 21(22.02); 2002.
US Environmental Protection Agency (USEPA), Method 3050B. EPA 660 13-75-009, Acid Digestion of Sediments, Sludges and Soils, Washington, D.C., 1996
Wood, P. (1997). Remediation methods for contaminated sites: in R. Hester and R. Harrison, Eds., Contaminated Land and Its Reclamation, Royal Society of Chemistry, Cambridge, 47-71.
Wuana, R.A. and Okieimen, F. E. (2011). Heavy metals in contaminated soils: A review of sources, chemistry, risks and best available strategies for remediation. ISRN Ecology, 1-20.
Zou, Z. Qiu, R. Zhang, W. Dong, H. Zhao, Z. Zhang, T. and Cai, X. (2009). The study of operating variables in soil washing with EDTA. Environmental pollution, 157(1); 229-236. | ||
|
آمار تعداد مشاهده مقاله: 902 تعداد دریافت فایل اصل مقاله: 668 |
||