Damped DQE Model Updating of a Three-Story Frame Using Experimental Data

[1] C.N. Chen, The two-dimensional frame model of the differential quadrature element method, Computers & Structures, Vol. 62, No. 3, pp. 555-571, 1997.
[2] R. Bellman, B. Kashef, J. Casti, Differential quadrature: a technique for the rapid solution of nonlinear partial differential equations, Journal of Computational Physics, Vol. 10, No. 1, pp. 40-52, 1972.
[3] C.N. Chen, The DQEM analysis of vibration of frame structures having nonprismatic members considering warping torsion, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 2, No. 3, pp. 235-255, 2001.
[4] C.N. Chen, DQEM analysis of out-of-plane vibration of nonprismatic curved beam structures considering the effect of shear deformation, Advances in Engineering Software, Vol. 39, No. 6, pp. 466-472, 2008.
[5] M. Mohammadi, M. Ghayour, A. Farajpour, Analysis of free vibration sector plate based on elastic medium by using new version of differential quadrature method, Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, Vol. 3, No. 2, pp. 47-56, 2010.
[6] M. Danesh, A. Farajpour, M. Mohammadi, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications, Vol. 39, No. 1, pp. 23-27, 2012.
[7] X. Wang, Y. Wang, Free vibration analysis of multiple-stepped beams by the differential quadrature element method, Applied Mathematics and Computation, Vol. 219, No. 11, pp. 5802-5810, 2013.
[8] S. Asemi, A. Farajpour, H. Asemi, M. Mohammadi, Influence of initial stress on the vibration of double-piezoelectric-nanoplate systems with various boundary conditions using DQM, Physica E: Low-dimensional Systems and Nanostructures, Vol. 63, pp. 169-179, 2014.
[9] M. Mohammadi, A. Farajpour, A. Moradi, M. Ghayour, Shear buckling of orthotropic rectangular graphene sheet embedded in an elastic medium in thermal environment, Composites Part B: Engineering, Vol. 56, pp. 629-637, 2014.
[10] M. Safarabadi, M. Mohammadi, A. Farajpour, M. Goodarzi, Effect of surface energy on the vibration analysis of rotating nanobeam, Journal of Solid Mechanics, Vol. 7, No. 3, pp. 299-311, 2015.
[11] M. Mohammadi, M. Safarabadi, A. Rastgoo, A. Farajpour, Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment, Acta Mechanica, Vol. 227, No. 8, pp. 2207-2232, 2016.
[12] A. Pouretemad, K. Torabi, H. Afshari, DQEM analysis of free transverse vibration of rotating non-uniform nanobeams in the presence of cracks based on the nonlocal Timoshenko beam theory, SN Applied Sciences, Vol. 1, No. 9, pp. 1092, 2019.
[13] J. E. Mottershead, M. Friswell, Model updating in structural dynamics: a survey, Journal of Sound and Vibration, Vol. 167, No. 2, pp. 347-375, 1993.
[14] D. M. Hamby, A review of techniques for parameter sensitivity analysis of environmental models, Environmental Monitoring and Assessment, Vol. 32, No. 2, pp. 135-154, 1994.
[15] J. Mottershead, M. Friswell, G. Ng, J. Brandon, Geometric parameters for finite element model updating of joints and constraints, Mechanical Systems and Signal Processing, Vol. 10, No. 2, pp. 171-182, 1996.
[16] Y. Xiang, Y. Peng, Y. Zhong, Z. Chen, X. Lu, X. Zhong, A particle swarm inspired multi-elitist artificial bee colony algorithm for real-parameter optimization, Computational Optimization and Applications, Vol. 57, No. 2, pp. 493-516, 2014.
[17] J. Kennedy, R. Eberhart, Particle swarm optimization, in Proceeding of the IEEE International Conference on Neural Networks, 1995.
[18] D. Karaboga, An idea based on honey bee swarm for numerical optimization, Technical report-tr06, Erciyes university, 2005.
[19] N. Maia, J. Silva, A. Ribeiro, On a general model for damping, Journal of Sound and Vibration, Vol. 218, No. 5, pp. 749-767, 1998.
[20] S. Adhikari, Damping models for structural vibration, PhD Thesis, University of Cambridge, 2000.
[21] V. Arora, S. Singh, T. Kundra, On the use of damped updated FE model for dynamic design, Mechanical Systems and Signal Processing, Vol. 23, No. 3, pp. 580-587, 2009.
[22] V. Arora, Structural damping identification method using normal FRFs, International Journal of Solids and Structures, Vol. 51, No. 1, pp. 133-143, 2014.
[23] L. Fatahi, S. Moradi, Differential quadrature element model updating of frame structures, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 228, No. 7, pp. 1094-1107, 2014.
[24] P. Rizos, N. Aspragathos, A. Dimarogonas, Identification of crack location and magnitude in a cantilever beam from the vibration modes, Journal of Sound and Vibration, Vol. 138, No. 3, pp. 381-388, 1990.
[25] N. Imamovic, Validation of large structural dynamics models using modal test data, PhD Thesis, Department of Mechanical Engineering, Imperial College, 1998.
[26] D. C. Kammer, Sensor placement for on-orbit modal identification and correlation of large space structures, Journal of Guidance, Control, and Dynamics, Vol. 14, No. 2, pp. 251-259, 1991.
[27] S. Omkar, J. Senthilnath, R. Khandelwal, G. N. Naik, S. Gopalakrishnan, Artificial Bee Colony (ABC) for multi-objective design optimization of composite structures, Applied Soft Computing, Vol. 11, No. 1, pp. 489-499, 2011.
[28] Z. Ding, R. Yao, J. Li, Z. Lu, Structural damage identification based on modified artificial bee colony algorithm using modal data, Inverse Problems in Science and Engineering, Vol. 26, No. 3, pp. 422-442, 2018.
[29] D. J. Downing, R. Gardner, F. Hoffman, An examination of response-surface methodologies for uncertainty analysis in assessment models, Technometrics, Vol. 27, No. 2, pp. 151-163, 1985.
[30] L. Bauer, D. Hamby, Relative sensitivities of existing and novel model parameters in atmospheric tritium dose estimates, Radiation Protection Dosimetry, Vol. 37, No. 4, pp. 253-260, 1991.
[31] J. Myers, A. Well, Research Design and Statistical Analysis (2nd edn), Lawrence Erlbaum, 2003.