|تعداد مشاهده مقاله||107,999,537|
|تعداد دریافت فایل اصل مقاله||84,433,874|
Impact of Cobalt Oxide Nanoparticles Dispersed in Water in Diesel Emulsion in Reduction of Diesel Engine Exhaust Pollutants
|دوره 8، شماره 2، تیر 2022، صفحه 579-593 اصل مقاله (401.07 K)|
|نوع مقاله: Original Research Paper|
|شناسه دیجیتال (DOI): 10.22059/poll.2021.331439.1198|
|Anil M. D.؛ Vinayak Hemadri* ؛ Mrityunjaya Swamy|
|Department of Mechanical Engineering, Dayanand Sagar University, Bengaluru 560068, India|
|The present work is aimed at decreasing pollutants emitted by diesel engine exhaust tailpipe and enhancing performance by incorporating cobalt oxide nanoparticles in water emulsified diesel. Water concentration of 5% and 10% is used to prepare various WD emulsion blends, with nano particle dosage levels of 50PPM and 100PPM. High speed homogenizer and ultrasonicator devices are used to disperse water droplets in diesel. Surfactant mixture of span80 and tween20 is used to achieve long term stability of emulsified fuel. The functional groups of emulsified fuel are analysed using FTIR spectroscopy. The characterization of cobalt oxide nanoparticles is carried using scanning electron microscope. Physiochemical properties such as calorific value, density, viscosity of emulsion blends and pure diesel are determined and compared. Experimental results reveal that addition of cobalt oxide nanoparticles in emulsified fuel with increased dosage of 100PPM shows 23%, 33.3%, 25%, and 44.6% reduction in NOX, HC, CO and smoke emission compared to pure diesel. The improvement in BTE and BSFC were observed for all emulsion blends.|
|Performance؛ Emission؛ Water Concentration؛ Smoke؛ Pure Diesel؛ Emulsion|
Tomar, M. and Kumar, N. (2020). Effect of multi-walled carbon nanotubes and alumina nano- additives in a light duty diesel engine fuelled with schleichera oleosa biodiesel blends. Sustainable Energy Technologies and Assessments, 42, 100833.
Ghannam, M. T. and Selim, M. Y. (2016). Rheological properties of water-in-diesel fuel emulsions. International Journal of Ambient Energy, 37(1), 24-28.
Soudagar, M. E. M., Nik-Ghazali, N. N., Kalam, M. A., Badruddin, I. A., Banapurmath, N. R. and Akram, N. (2018). The effect of nano-additives in diesel-biodiesel fuel blends: A comprehensive review on stability, engine performance and emission characteristics. Energy Conversion and Management, 178, 146-177.
Bhuiya, M. M. K., Rasul, M. G., Khan, M. M. K., Ashwath, N., Azad, A. K. and Hazrat, M. A. (2014). Second generation biodiesel: potential alternative to-edible oil-derived biodiesel. Energy Procedia, 61, 1969-1972.
Keerthi Kumar, N., Banapurmath, N. R., Chandrashekar, T. K., Jatadhara, G. S., Soudagar, M. E. M., Anqi, A. E., ... & Ali, M. A. (2021). Effect of Parameters Behavior of Simarouba Methyl Ester Operated Diesel Engine. Energies, 14(16), 1-18.
Telgane, V., Godiganur, S., Kumar, N. K. and Chandrashekar, T. K. (2021). Performance and Emission Characteristics of CI Engine Fuelled with Hybrid Biodiesel. International Journal of Vehicle Structures & Systems (IJVSS), 13(1).
Anil, M. D., Hemadri, V. B. and Swamy, K. M. (2021, February). Stability, performance and emission analysis of single cylinder diesel engine fueled with water diesel emulsion as an alternate fuel. In AIP Conference Proceedings (Vol. 2316, No. 1, p. 030030). AIP Publishing LLC.
Mura, E., Massoli, P., Josset, C., Loubar, K. and Bellettre, J. (2012). Study of the micro-explosion temperature of water in oil emulsion droplets during the Leidenfrost effect. Experimental Thermal and Fluid Science, 43, 63-70.
Vellaiyan, S. and Amirthagadeswaran, K. S. (2016). The role of water-in-diesel emulsion and its additives on diesel engine performance and emission levels: A retrospective review. Alexandria Engineering Journal, 55(3), 2463-2472.
Morozumi, Y. and Saito, Y. (2010). Effect of physical properties on microexplosion occurrence in water-in-oil emulsion droplets. Energy & fuels, 24(3), 1854-1859.
Ghannam, M. T. and Selim, M. Y. (2009). Stability behavior of water-in-diesel fuel emulsion. Petroleum Science and Technology, 27(4), 396-411.
Patil, H., Gadhave, A., Mane, S. and Waghmare, J. (2015). Analyzing the stability of the water-in-diesel fuel emulsion. Journal of Dispersion Science and Technology, 36(9), 1221-1227.
Preetika, R., Mehta, P. S., Kaisare, N. S. and Basavaraj, M. G. (2019). Kinetic stability of surfactant stabilized water-in-diesel emulsion fuels. Fuel, 236, 1415-1422.
Al-Sabagh, A. M., Emara, M. M., El-Din, M. N. and Aly, W. R. (2011). Formation of water-in-diesel oil nano-emulsions using high energy method and studying some of their surface active properties. Egyptian Journal of Petroleum, 20(2), 17-23.
Uson, N., Garcia, M. J. and Solans, C. (2004). Formation of water-in-oil (W/O) nano-emulsions in a water/mixed non-ionic surfactant/oil systems prepared by a low-energy emulsification method. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 250(1-3), 415-421.
Porras, M., Solans, C., Gonzalez, C. and Gutierrez, J. M. (2008). Properties of water-in-oil (W/O) nano-emulsions prepared by a low-energy emulsification method. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 324(1-3), 181-188.
Seifi, M. R., Desideri, U., Ghorbani, Z., Antonelli, M., Frigo, S., Hassan-Beygi, S. R. and Ghobadian, B. (2019). Statistical evaluation of the effect of water percentage in water-diesel emulsion on the engine performance and exhaust emission parameters. Energy, 180, 797-806.
Rai, R. K. and Sahoo, R. R. (2019). Effective power and effective power density analysis for water in diesel emulsion as fuel in diesel engine performance. Energy, 180, 893-902.
Ithnin, A. M., Yahya, W. J., Ahmad, M. A., Ramlan, N. A., Kadir, H. A., Sidik, N. A. C. and Koga, T. (2018). Emulsifier-free Water-in-Diesel emulsion fuel: Its stability behaviour, engine performance and exhaust emission. Fuel, 215, 454-462.
Hasannuddin, A. K., Yahya, W. J., Sarah, S., Ithnin, A. M., Syahrullail, S., Sidik, N. A. C., ... & Ramlan, N. A. (2018). Nano-additives incorporated water in diesel emulsion fuel: fuel properties, performance and emission characteristics assessment. Energy Conversion and Management, 169, 291-314.
Vigneswaran, R., Annamalai, K., Dhinesh, B. and Krishnamoorthy, R. (2018). Experimental investigation of unmodified diesel engine performance, combustion and emission with multipurpose additive along with water-in-diesel emulsion fuel. Energy Conversion and Management, 172, 370-380.
Vali, R. H. and Wani, M. M. (2020). Optimal utilization of ZnO nanoparticles blended diesel-water emulsion by varying compression ratio of a VCR diesel engine. Journal of Environmental Chemical Engineering, 8(4), 103884.
Vellaiyan, S. (2020). Combustion, performance and emission evaluation of a diesel engine fueled with soybean biodiesel and its water blends. Energy, 201, 117633.
Perumal, V. and Ilangkumaran, M. (2018). Water emulsified hybrid pongamia biodiesel as a modified fuel for the experimental analysis of performance, combustion and emission characteristics of a direct injection diesel engine. Renewable energy, 121, 623-631.
Raju, V. D., Kishore, P. S., Kumar, M. H. and Reddy, S. R. (2019). Experimental investigation of alumina oxide nanoparticles effects on the performance and emission characteristics of tamarind seed biodiesel fuelled diesel engine. Materials Today: Proceedings, 18, 1229-1242.
Gharehghani, A., Asiaei, S., Khalife, E., Najaﬁ, B. and Tabatabaei, M. (2019). Simultaneous reduction of CO and NOx emissions as well as fuel consumption by using water and nano particles in Diesel–Biodiesel blend. Journal of cleaner production, 210, 1164-1170.
Mehregan, M. and Moghiman, M. (2018). Effects of nano-additives on pollutants emission and engine performance in a urea-SCR equipped diesel engine fueled with blended-biodiesel. Fuel, 222, 402-406.
Selvan, V. A. M., Anand, R. B. and Udayakumar, M. (2014). Effect of Cerium Oxide Nanoparticles and Carbon Nanotubes as fuel-borne additives in Diesterol blends on the performance, combustion and emission characteristics of a variable compression ratio engine. Fuel, 130, 160-167.
Elżbieta, D., Dobrzyńska, E., Szewczyńska, M., Pośniak, M., Szczotka, A., Puchałka, B. and Woodburn, J. (2020). Exhaust emissions from diesel engines fueled by different blends with the addition of nanomodifiers and hydrotreated vegetable oil HVO.
Mondal, P. K. and Mandal, B. K. (2019). Optimization of water-emulsified diesel preparation and comparison of mechanical homogenization and ultrasonic dispersion methods to study CI engine performances. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-30.
Kumar, N., Raheman, H. and Machavaram, R. (2019). Performance of a diesel engine with water emulsified diesel prepared with optimized process parameters. International Journal of Green Energy, 16(9), 687-701.
Hosseinzadeh-Bandbafha, H., Khalife, E., Tabatabaei, M., Aghbashlo, M., Khanali, M., Mohammadi, P., .... and Soltanian, S. (2019). Effects of aqueous carbon nanoparticles as a novel nanoadditive in water-emulsified diesel/biodiesel blends on performance and emissions parameters of a diesel engine. Energy Conversion and Management, 196, 1153-1166.
Dinesha, P., Kumar, S. and Rosen, M. A. (2019). Combined effects of water emulsion and diethyl ether additive on combustion performance and emissions of a compression ignition engine using biodiesel blends. Energy, 179, 928-937.
Basha, J. S. and Anand, R. B. (2011). An experimental study in a CI engine using nanoadditive blended water–diesel emulsion fuel. International journal of green energy, 8(3), 332-348.
تعداد مشاهده مقاله: 449
تعداد دریافت فایل اصل مقاله: 588