پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شمارهها | 6,230 |
| تعداد مقالات | 67,766 |
| تعداد مشاهده مقاله | 115,223,621 |
| تعداد دریافت فایل اصل مقاله | 89,970,652 |
Proposed Methodology and Comprehensive Design Process for Seismic Rehabilitation of Steel Structures with Supplemental Viscous Dampers | ||
| Civil Engineering Infrastructures Journal | ||
| دوره 56، شماره 1، شهریور 2023، صفحه 79-103 اصل مقاله (1.72 M) | ||
| نوع مقاله: Research Papers | ||
| شناسه دیجیتال (DOI): 10.22059/ceij.2022.330808.1793 | ||
| نویسندگان | ||
| Mohammad Bahmani1؛ Seyed Mehdi Zahrai* 2 | ||
| 1Assistant Professor, Department of Civil Engineering, Abadan Branch, Islamic Azad University, Abadan, Iran. | ||
| 2Professor, School of Civil Engineering, College of Engineering, University of Tehran, Tehran, Iran. Adjunct Professor, Civil Engineering Department, University of Ottawa, Canada. | ||
| چکیده | ||
| Several types of steel-framed structures now require seismic retrofitting as a result of changes in their usage or modifications in seismic codes. During the last two decades, viscous dampers have been widely used for seismic rehabilitation of buildings because of their ease of application and significant reductions in structural response. The main objective of this research is to present a new comprehensive design process for seismic rehabilitation with non-linear viscous dampers and to introduce the concept of Optimal Retrofit Level (ORL) to control steel buildings. In this article, the inter-story drift as an important parameter of structural response is employed to estimate the failure cost and determine the limit state. Three-, nine- and twenty-story benchmark buildings are used to evaluate the proposed methodology. These buildings have considerably different dynamic properties. The earthquake records corresponding to three levels of seismic hazard are also applied for time-history analysis in order to investigate the trustworthiness of results obtained for zones with different seismicity. The numerical results indicate that the suggested method is able to drop lifecycle costs and creat an equilibrium between rehabilitation costs and failure costs after seismic rehabilitation. | ||
| کلیدواژهها | ||
| Lifecycle Cost؛ Optimal Retrofit Level؛ Seismic Retrofit؛ Steel Buildings؛ Viscous Dampers | ||
| مراجع | ||
|
Altieri, D., Tubaldi, E., De Angelis, M., Patelli, E. and Dall’Asta, A. (2018). “Reliability-based optimal design of nonlinear viscous dampers for the seismic protection of structural systems”, Bulletin of Earthquake Engineering, 16, 963-982, https://doi.org/10.1007/s10518-017-0233-4.
Aydin, E., Noroozinejad Farsangi, E., Öztürk, B., Bogdanovic, A. and Dutkiewicz, M. (2019). Improvement of building resilience by viscous dampers, In: Resilient Structures and Infrastructure, Noroozinejad Farsangi E., Takewaki I., Yang T., Astaneh-Asl A., and Gardoni P., (eds.), Springer, 105-127, https://doi.org/10.1007/978-981-13-7446-3_4.
Bahmani, M. and Zahrai, S. M. (2018). “Application of a comprehensive seismic retrofit procedure for steel buildings using nonlinear viscous dampers”, International Journal of Civil Engineering, 17(1 August), 1-19, https://doi.org/10.1007/s40999-018-0384-y.
Banazadeh, M., Gholhaki, M. and Parvini Sani, H. (2017). “Cost-benefit analysis of seismic-isolated structures with viscous damper based on loss estimation”, Structure and Infrastructure Engineering, 13(8), 1045-1055, https://doi.org/10.1080/15732479.2016.1236131.
Beheshti, M. and Asadi, P. (2020). “Optimal seismic retrofit of fractional viscoelastic dampers for minimum life-cycle cost of retrofitted steel frames. Structural and Multidisciplinary Optimization, 61(5), 2021-2035, https://doi.org/10.1007/s00158-019-02454-w.
Bommer, J.J., Elnashai, A.S, and Weir, A.G. (2000). “Compatible acceleration and displacement spectra for seismic design codes”, Proceedings of the 12th World Conference on Earthquake Engineering, Auckland, New Zealand.
Chopra, A. K. and McKenna, F. (2016). “Modeling viscous damping in nonlinear response history analysis of buildings for earthquake excitation”, Earthquake Engineering and Structural Dynamics, 45(2), 193-211, https://doi.org/10.1002/eqe.2622.
Dall’Asta, A., Scozzese, F., Ragni, L. and Tubaldi, E. (2017). “Effect of the damper property variability on the seismic reliability of linear systems equipped with viscous dampers”, Bulletin of Earthquake Engineering, 15(11), 5025-5053, https://doi.org/10.1007/s10518-017-0169-8.
Dall′ Asta, A., Tubaldi, E. and Ragni, L. (2016). “Influence of the nonlinear behavior of viscous dampers on the seismic demand hazard of building frames”, Earthquake Engineering and Structural Dynamics, 45(1), 149-169, https://doi.org/10.1002/eqe.2623.
Edip, K., Bogdanovic, A., Stojmanovska, M., Poposka, A. and Farsangi, E.N. (2020). “A new approach in simulation of soil-structure interaction problems including damper effects”, International Journal of Earthquake and Impact Engineering, 3(1), 1-14, https://doi.org/10.1504/IJEIE.2020.105377.
Fragiadakis, M., Lagaros, N. D. and Papadrakakis, M. (2006). “Performance-based multiobjective optimum design of steel structures considering life-cycle cost”, Structural and Multidisciplinary Optimization, 32(1), 1-11, https://doi.org/10.1007/s00158-006-0009-y.
Ghasemof, A., Mirtaheri, M., Mohammadi, R.K. and Mashayekhi, M.R. (2021). “Multi-objective optimal design of steel MRF buildings based on life-cycle cost using a swift algorithm”, Structures, 34, 4041-4059, https://doi.org/10.1016/j.istruc.2021.09.088.
Gidaris, I. and Taflanidis, A.A. (2015). “Performance assessment and optimization of fluid viscous dampers through life-cycle cost criteria and comparison to alternative design approaches”, Bulletin of Earthquake Engineering, 13(4), 1003-1028, https://doi.org/10.1007/s10518-014-9646-5.
Golnargesi, S., Shariatmadar, H. and Golnargesi, B. (2022). “Structural control of building with ATMD through AN-IT2FLC under seismic excitation”, Civil Engineering Infrastructures Journal, 55(2), 309-331, 10.22059/ceij.2021.325512.1760.
Guo, T., Xu, J., Xu, W. and Di, Z. (2014). “Seismic upgrade of existing buildings with fluid viscous dampers: Design methodologies and case study”, Journal of Performance of Constructed Facilities, 29(6), 04014175, https://doi.org/10.1061/(ASCE)CF.1943-5509.0000671.
Hwang, J.-S., Huang, Y.-N., Yi, S.-L. and Ho, S.-Y. (2008). “Design formulations for supplemental viscous dampers to building structures”, Journal of Structural engineering, 134(1), 22-31, https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(22).
Hwang, J.-S., Lin, W.-C. and Wu, N.-J. (2013). “Comparison of distribution methods for viscous damping coefficients to buildings”, Structure and Infrastructure Engineering, 9(1), 28-41, https://doi.org/10.1080/15732479.2010.513713.
Kappos, A. J. and Dimitrakopoulos, E. (2008). “Feasibility of pre-earthquake strengthening of buildings based on cost-benefit and life-cycle cost analysis, with the aid of fragility curves”, Natural Hazards, 45(1), 33-54, https://doi.org/10.1007/s11069-007-9155-9.
Kitayama, S. and Constantinou, M.C. (2018). “Seismic performance of buildings with viscous damping systems designed by the procedures of ASCE/SEI 7-16”, Journal of Structural engineering, 144(6), 04018050, https://doi.org/10.1061/(ASCE)ST.1943-541X.0002048.
Lin, Y.-Y., Chang, K.-C. and Chen, C.-Y. (2008). Direct displacement-based design for seismic retrofit of existing buildings using nonlinear viscous dampers”, Bulletin of Earthquake Engineering, 6(3), 535-552, https://doi.org/10.1007/s10518-008-9062-9.
Ohtori, Y., Christenson, R., Spencer Jr, B. and Dyke, S. (2004). “Benchmark control problems for seismically excited nonlinear buildings”, Journal of Engineering Mechanics, 130(4), 366-385, https://doi.org/10.1061/(ASCE)0733-9399(2004)130:4(366).
Ramirez, O. M., Constantinou, M.C., Kircher, C.A., Whittaker, A., Johnson, M.W., Gomez, J.D. and Chrysostomou, C. (2000). Development and evaluation of simplified procedures for the analysis and design of buildings with passive energy dissipation systems, MCEER Reports, State University of New York at Buffalo.
Rashid, Z., Tantray, M. and Noroozinejad Farsangi, E. (2022). “Acceleration response-based adaptive strategy for vibration control and location optimization of magnetorheological dampers in multistoried structures”, Practice Periodical on Structural Design and Construction, 27(1), 04021065, https://doi.org/10.1061/(ASCE)SC.1943-5576.0000648.
Salajegheh, S. and Asadi, P. (2020). “Life‐cycle cost optimization of semiactive magnetorheological dampers for the seismic control of steel frames”, The Structural Design of Tall and Special Buildings, 29(18), e1807, https://doi.org/10.1002/tal.1807.
Sarcheshmehpour, M. and Estekanchi, H. (2021). “Life cycle cost optimization of earthquake-resistant steel framed tube tall buildings”, Structures, 30, 585-601, https://doi.org/10.1016/j.istruc.2021.01.038.
Sarkisian, M., Lee, P., Hu, L., Garai, R., Tsui, A. and Reis, E. (2013). “Achieving enhanced seismic design using viscous damping device technologies”, Structures Congress 2013: Bridging Your Passion with Your Profession, ASCE, 2729-2744, https://doi.org/10.1061/9780784412848.237.
Seleemah, A. and Constantinou, M.C. (1997). Investigation of seismic response of buildings with linear and nonlinear fluid viscous dampers, National Center for Earthquake Engineering Research, NCEER Publications.
Shin, H. and Singh, M. (2014). “Minimum failure cost-based energy dissipation system designs for buildings in three seismic regions, Part I: Elements of failure cost analysis”, Engineering Structures, 74(September), 266-274, https://doi.org/10.1016/j.engstruct.2014.04.054.
Silvestri, S., Gasparini, G. and Trombetti, T. (2010). “A five-step procedure for the dimensioning of viscous dampers to be inserted in building structures”, Journal of Earthquake Engineering, 14(3), 417-447, https://doi.org/10.1080/13632460903093891.
Somerville, P. and Collins, N. (2002). Ground motion time histories for the Humboldt Bay Bridge, Pasadena, CA, URS Corporation.
Sorace, S., Terenzi, G. and Mori, C. (2016). “Passive energy dissipation-based retrofit strategies for R/C frame water towers” Engineering Structures, 106(1), 385-398, https://doi.org/10.1016/j.engstruct.2015.10.038.
Taylor, D.P. (1999). “Buildings: Design for damping”, Proceedings of the Boston Society of Civil Engineers, BSCES, Lecture Series: “Dynamics of Structures”, USA.
Wani, Z.R., Tantray, M. and Farsangi, E.N. (2021). “Investigation of proposed integrated control strategies based on performance and positioning of MR dampers on shaking table”, Smart Materials and Structures, 30(11), 115009, https://doi.org/10.1088/1361-665X/ac26e6.
Wen, Y.-K. and Kang, Y. (2001). “Minimum building life-cycle cost design criteria. I: Methodology”, Journal of Structural Engineering, 127(3), 330-337, https://doi.org/10.1061/(ASCE)0733-9445(2001)127:3(330). | ||
|
آمار تعداد مشاهده مقاله: 309 تعداد دریافت فایل اصل مقاله: 786 |
||