On-site Evaluation of NOx Removal Efficiency on Photocatalytic Pavements and Analysis of Environmental Variables

Active, T. (2009). The Photocatalytic Active Principle TECHNICAL REPORT. Italcementi Group.
Ballari, M. and Brouwers, H. (2013). Full scale demonstration of air-purifying pavement. J. Hazard. Mater., 254(15); 406-414.
Beeldens, A. (2008). Air purification by pavement blocks: final results of the research at the BRRC.
Bocci, E., Riderelli, L., Fava, G. and Bocci, M. (2016). Durability of NO oxidation effectiveness of pavement surfaces treated with photocatalytic titanium dioxide. Arab. J. Sci. Eng., 41(12); 4827-4833.
Boonen, E. and Beeldens, A. (2014). Recent photocatalytic applications for air purification in Belgium. Coat., 4(3); 553-573.
Chen, H., Nanayakkara, C.E. and Grassian, V.H. (2012). Titanium dioxide photocatalysis in atmospheric chemistry. Chem. Rev., 112(11); 5919-5948.
Chen, M. and Chu, J.-W. (2011). NOx photocatalytic degradation on active concrete road surface—from experiment to real-scale application. J. Clean. Prod., 19(11); 1266-1272.
Choi, J.-K., Heo, J.-B., Ban, S.-J., Yi, S.-M. and Zoh, K.-D. (2012). Chemical characteristics of PM2. 5 aerosol in Incheon, Korea. Atmos. Environ., 60; 583-592.
de Melo, J.V.S. and Trichês, G. (2012). Evaluation of the influence of environmental conditions on the efficiency of photocatalytic coatings in the degradation of nitrogen oxides (NOx). Build. Environment., 49(1); 117-123.
Dockery, D.W., Pope, C.A., Xu, X., Spengler, J.D., Ware, J.H., Fay, M.E., Ferris Jr, B.G. and Speizer, F.E. (1993). An association between air pollution and mortality in six US cities. N. Engl. J. Med., 329(24); 1753-1759.
Du, Y., Xu, X., Chu, M., Guo, Y. and Wang, J. (2016). Air particulate matter and cardiovascular disease: the epidemiological, biomedical and clinical evidence. J. Thorac. Dis., 8(1); E8.
Dylla, H., Hassan, M.M., Mohammad, L.N., Rupnow, T. and Wright, E. (2010). Evaluation of environmental effectiveness of titanium dioxide photocatalyst coating for concrete pavement. Transp. Res. Rec., 2164(1); 46-51.
Folli, A., Strøm, M., Madsen, T.P., Henriksen, T., Lang, J., Emenius, J., Klevebrant, T. and Nilsson, Å. (2015). Field study of air purifying paving elements containing TiO2. Atmos. Environ., 107; 44-51.
Gallus, M., Akylas, V., Barmpas, F., Beeldens, A., Boonen, E., Boréave, A., Cazaunau, M., Chen, H., Daële, V. and Doussin, J. (2015). Photocatalytic de-pollution in the Leopold II tunnel in Brussels: NOx abatement results. Build. Environ., 84; 125-133.
Guerrini, G.L. (2012). Photocatalytic performances in a city tunnel in Rome: NOx monitoring results. Constr Build. Mater., 27(1); 165-175.
Guo, M.-Z., Ling, T.-C. and Poon, C.S. (2017). Photocatalytic NOx degradation of concrete surface layers intermixed and spray-coated with nano-TiO2: Influence of experimental factors. Cem. Concr. Compos., 83; 279-289.
Hassan, M., Mohammad, L.N., Asadi, S., Dylla, H. and Cooper III, S. (2013). Sustainable photocatalytic asphalt pavements for mitigation of nitrogen oxide and sulfur dioxide vehicle emissions. J. Mater. Civ. Eng., 25(3); 365-371.
Hüsken, G., Hunger, M. and Brouwers, H. (2009). Experimental study of photocatalytic concrete products for air purification. Build. Environ., 44(12); 2463-2474.
Kim, K.-H., Kabir, E. and Kabir, S. (2015). A review on the human health impact of airborne particulate matter. Environ. Int., 74; 136-143.
Lan, Y., Lu, Y. and Ren, Z. (2013). Mini review on photocatalysis of titanium dioxide nanoparticles and their solar applications. Nano Energy., 2(5); 1031-1045.
Loomis, D., Huang, W. and Chen, G. (2014). The International Agency for Research on Cancer (IARC) evaluation of the carcinogenicity of outdoor air pollution: focus on China. Chin. J. Cancer., 33(4); 189.
Maggos, T., Bartzis, J., Leva, P. and Kotzias, D. (2007). Application of photocatalytic technology for NO x removal. Appl. Phys. A. 89(1); 81-84.
Maggos, T., Plassais, A., Bartzis, J., Vasilakos, C., Moussiopoulos, N. and Bonafous, L. (2008). Photocatalytic degradation of NOx in a pilot street canyon configuration using TiO2-mortar panels. Environ. Monit. Assess., 136(1); 35-44.
Nguyen, H.P., Kim, T.H. and Lee, S.W. (2018). Influence of operational parameters on the photocatalytic performance of DE-NOx process Via MIL-101 (Fe). Progress in Natural Science: Met. Mater., 28(6); 689-695.
Schwartz, J., Laden, F. and Zanobetti, A. (2002). The concentration-response relation between PM(2.5) and daily deaths. Environ. Health Perspect., 110(10); 1025-1029.
Sikkema, J.K. (2013). Photocatalytic degradation of NOx by concrete pavement containing TiO2.
Valavanidis, A., Fiotakis, K. and Vlachogianni, T. (2008). Airborne particulate matter and human health: toxicological assessment and importance of size and composition of particles for oxidative damage and carcinogenic mechanisms. J. Environ. Sci. Health C: Toxicol. Carcinog., 26(4); 339-362.
Wang, D., Leng, Z., Yu, H., Hüben, M., Kollmann, J. and Oeser, M. (2017). Durability of epoxy-bonded TiO2-modified aggregate as a photocatalytic coating layer for asphalt pavement under vehicle tire polishing. Wear., 382(15); 1-7.
Yu, Q. and Brouwers, H. (2009). Indoor air purification using heterogeneous photocatalytic oxidation. Part I: experimental study. Appl. Catal. B ., 92(3-4); 454-461.
Yue, X., Ma, N.L., Sonne, C., Guan, R., Lam, S.S., Van Le, Q., Chen, X., Yang, Y., Gu, H. and Rinklebe, J. (2021). Mitigation of indoor air pollution: A review of recent advances in adsorption materials and catalytic oxidation. J. Hazard. Mater.; 405(5); 124138.