پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,572 |
| تعداد مقالات | 71,028 |
| تعداد مشاهده مقاله | 125,499,476 |
| تعداد دریافت فایل اصل مقاله | 98,762,084 |
Damage Detection of Truss Bridges Using Wavelet Transform of Rotation Signal | ||
| Civil Engineering Infrastructures Journal | ||
| مقاله 2، دوره 57، شماره 1، شهریور 2024، صفحه 17-31 اصل مقاله (679.18 K) | ||
| نوع مقاله: Research Papers | ||
| شناسه دیجیتال (DOI): 10.22059/ceij.2023.349207.1870 | ||
| نویسندگان | ||
| Hamid Reza Ghafouri* 1؛ Amin Khajehdezfuly2؛ Omid Saadat Poor3 | ||
| 1Professor, Faculty of Civil Engineering and Architecture, Shahid Chamran University of Ahvaz, Ahvaz, Iran. | ||
| 2Assistant Professor, Faculty of Civil Engineering and Architecture, Shahid Chamran University of Ahvaz, Ahvaz, Iran. | ||
| 3M.Sc. Student, Faculty of Civil Engineering and Architecture, Shahid Chamran University of Ahvaz, Ahvaz, Iran. | ||
| چکیده | ||
| Although some researchers indicated that the rotation response of the structure is a proper index to identify the damage location, Wavelet Transform (WT) of rotation response of the bridge is not yet used to detect the damage location in the previous studies. In this regard, a numerical model of a truss bridge was developed using finite element method. The static response of the model under one point-load and a six-axle locomotive was calculated. The response obtained from the model was compared with that of the literature to investigate the validity of the model developed in this study. The WT coefficients of horizontal, vertical and rotation responses of each member of the bridge were obtained based on the Gaus2 wavelet basis function. Several damage scenarios were considered for the bridge to investigate the effectiveness of WT of rotation response of the bridge to detect the damage location. The obtained results show that the WT of horizontal displacement is not a proper index to detect the damage in the bridge members. A Comparison between WT coefficients of vertical displacement and rotation for all members indicates that the rotation response is a proper index to identify the damage and loading locations. In some cases, while the damage causes a significant jump on the WT coefficients of rotations of the members, the WT coefficients of vertical displacement of these members are not influenced by the damage. | ||
| کلیدواژهها | ||
| Rotation Response؛ Structural Health Monitoring؛ Truss Bridge؛ Wavelet Transform | ||
| مراجع | ||
|
Andrea, J., Kiremidjian, A., Liao, Y., Georgakis, C. and Rajagopal, R. (2016). “Structural health monitoring approach for detecting ice accretion on bridge cable using the Haar Wavelet Transform Sensors”, In: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2016 (Vol. 9803, pp. 107-114), SPIE, https://doi.org/10.1117/12.2219392.
Andreaus, U., Baragatti, P., Casini, P. and Iacoviello, D. (2017). “Experimental damage evaluation of open and fatigue cracks of multi-cracked beams by using wavelet transform of static response via image analysis”, Structural Control Health Monitoring, 24(4), 1-18,
Barone, G., Marino, F. and Pirrotta, A. (2008). “Low stiffness variation in structural systems: identification and localization”, Structural Control and Health Monitoring, 15(3), 450-470, https://doi.org/10.1002/stc.246.
Cantero, D. and Basu, B. (2014). “Railway infrastructure damage detection using wavelet transformed acceleration response of traversing vehicle”, Structural Control and Health Monitoring, 22(1), 62-70, https://doi.org/10.1002/stc.1660.
Christides, S. and Barr, A.D.S. (1999). “One-dimensional theory of cracked Bernoulli-Euler beams”, International Journal of Mechanical Science, 26(3), 639-638, https://doi.org/10.1016/0020-7403(84)90017-1.
Douka, S., Loutridis, S. and Trochidis, A. (2003). “Crack identification in beams using wavelet analysis”, International Journal of Solids and Structures, 40(13-14), 3557-3569,
Hester, D., Brownjohn, J., Huseynov, F., Obrien, E., Gonzalez, A. and Casero, M. (2020). “Identifying damage in a bridge by analysing rotation response to a moving load”, Structure and Infrastructure Engineering, 16(7), 1050-1065, https://doi.org/10.1080/15732479.2019.1680710.
Hester, D. and González, A. (2011). “A wavelet-based damage detection algorithm based on bridge acceleration response to a vehicle”, Journal of Mechanical Systems and Signal Processing, 28(4), 145-146, https://doi.org/10.1016/j.ymssp.2011.06.007.
Hou, Z., Noori, M. and Amand, R.S. (2000). “Wavelet-based approach for structural damage detection”, Journal of Engineering Mechanics, 126(7), 677-683,
Huang, H.B., Yi, T.H., Li, H.N. and Liu, H. (2020). “Strain-based performance warning method for bridge main girders under variable operating conditions”, Journal of Bridge Engineering, 25(3), 04020013, https://doi.org/10.1061/(ASCE)BE.1943-5592.0001538.
Janeliukstis, R., Rucevskis, S., Wesolowski, M. and Chate, A. (2017). “Damage identification in beam structure based on thresholded variance of normalized wavelet scalogram”, 3rd International Conference on Innovative Materials, Structures and Technologies (IMST 2017), Latvia, https://doi.org/10.1088/1757-899X/251/1/012089.
Kankanamge, Y., Hu Y. and Shao, X. (2020). “Application of wavelet transform in structural health monitoring”, Earthquake Engineering and Engineering Vibration, 19(2), 515-532, https://doi.org/10.1007/s11803-020-0576-8.
Khajehdezfuly, A., Ehsanfard, F. and Labibzadeh, M. (2023). “Effect of fuse damper on cyclic performance of self-centring bridge pier”, Proceedings of the Institution of Civil Engineers-Bridge Engineering, 176(03), 1-21, https://doi.org/10.1680/jbren.22.00028.
Khiem, N.T., Lien, T.V. and Duc, N.T. (2021). “Crack identification in functionally graded material framed structures using stationary wavelet transform and neural network”, Journal of Zhejiang University-SCIENCE A, 22(5), 657-671, https://doi.org/10.1631/jzus.A2000402.
Kordi, A. and Mahmoudi, M. (2022). “Damage detection in truss bridges under moving load using time history response and members influence line curves”, Civil Engineering Infrastructures Journal, 55(1), 183-194, https://doi.org/10.22059/ceij.2021.314109.1723.
Kumar, R. and Singh, S.K. (2021). “Crack detection near the ends of a beam using wavelet transform and high-resolution beam deflection measurement”, European Journal of Mechanics - A/Solids, 88(3), 13-25, https://doi.org/10.1016/j.euromechsol.2021.104259.
Labibzadeh, M., Bostan Shirin, F. and Khajehdezfuly, A. (2022). “Improvement of performance of the RC beams using the longitudinal spiral reinforcements”, International Journal of Structural Integrity, 13(06), 922-950, https://doi.org/10.1108/IJSI-07-2022-0094.
Labibzadeh, M., Jamalpour, R, Jing, D.H. and Khajehdezfuly, A. (2019). “A numerical comparison between spiral transverse RC and CFST columns under loads of varying eccentricities”, Periodica Polytechnica Civil Engineering, 63(04), 1171-1182, https://doi.org/10.3311/PPci.14177.
Ma, Q., Solis, M. and Galvin, P. (2021), “Wavelet analysis of static deflections for multiple damage identification in beams”, Mechanical Systems and Signal Processing, 147, 107103, https://doi.org/10.1016/j.ymssp.2020.107103.
Mahato, B. and Harish, H.V. (2015). “Experimental verification of deflection of beam using theoretical and numerical approach”, International Journal of Advance Research in Engineering, Science & Technology, 2(3), 2394-2444, https://api.semanticscholar.org/CorpusID:73574711.
Martinez, D., Malekjafarian, A. and Obrien, E. (2019). "Bridge health monitoring using deflection measurements under random traffic”, Structural Control Health Monitoring, 27(9), 24-42, https://doi.org/10.1002/stc.2593.
Miao, B., Wang, M., Yang, S., Luo, Y. and Yang, C. (2020). “An optimized damage identification method of beam using Wavelet and Neural Network”, Engineering, 12(3), 748-76, https://doi.org/10.4236/eng.2020.1210053.
Moreu, F., Kim, R.E., Spencer Jr, B.F. (2017). “Railroad bridge monitoring using wireless smart sensors”, Structural Control Health Monitoring, 24(2), 34-51, https://doi.org/10.1002/stc.1863.
Ovanesova, A.V. and Suarez, L.E. (2004). “Application of wavelet transforms to damage detection in frame structures”, Engineering Structures, 26(5), 39-49, https://doi.org/10.1016/j.engstruct.2003.08.009.
Poorveis, D., Khajehdezfuly, A. and Hosseini Dehdashti, S.A. (2023). “Development of a combined finite element/finite strip method to analysis the long-span box bridge having diaphragm”, Journal of Transportation Research, 20(3), 127-148, https://doi.org/10.22034/tri.2021.262969.2846.
Przemieniecki, J.S. (1985). Theory of matrix structural analysis, Dover Publications, New York, USA, https://store.doverpublications.com/products/9780486649481.
Rezaifar, O. and Doostmohammadi, M.R. (2016). “Damage detection of axially loaded beam: A frequency-based method”, Civil Engineering Infrastructures Journal, 49(1), 165-172, https://doi.org/10.7508/ceij.2016.01.012.
Rizzo, P. and Enshaeian, A. (2022). “Challenges in bridge health monitoring: A review”, Sensors, 21(13), 1-23, https://doi.org/10.3390/s21134336.
Sadeghi, J. and Fathali, M. (2007). “Deterioration analysis of concrete bridges under inadmissible loads from the fatigue point of view”, Scientia Iranica, 14(3), 185-192.
Sadeghi, J. and Hashemi Rezvani, F. (2013). “Development of non-destructive method of detecting steel bars corrosion in bridge decks”, Structural Engineering and Mechanics: An International Journal, 46(5), 615-627.
Serra, R. and Lopez, R. (2017). “Damage detection methodology on beam-like structures based on combined modal wavelet transform strategy”, Journal of Mechanics and Industry, 18(8), 1-18, https://doi.org/10.1051/meca/2018007.
Silik, A., Noori, M., Altabey, W.A., Dang, J., Ghiasi, R. and Wu, Z. (2021). “Optimum wavelet selection for nonparametric analysis toward structural health monitoring for processing big data from sensor network: A comparative study”, Structural Health Monitoring, 78(3), 1-17, https://doi.org/10.1177/14759217211010261.
Silva, R.S.Y.C., Bezerra, L.M. and Pena, L.A.P. (2014). “Detecting open cracks insides beams using the BEM and wavelet transform”, Blucher Mechanical Engineering Proceedings, 1(1), 1-9, https://doi.org/10.5151/meceng-wccm2012-19292.
Silva, R.S.Y.C., Bezerra, L.M. and Brito, M.A.N. (2012), “Determination of damages in beams using wavelet transforms”, Proceedings of the World Congress on Engineering (WCE 2012), London, U.K, https://www.iaeng.org/publication/WCE2012/WCE2012_pp1211-1213.pdf.
Sun, Z. and Chang, C.C. (2002), “Structural damage assessment based on wavelet packet transform”, Journal of Structural Engineering, 128(10), 1354-1361, https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1354).
Taha, M.M.R., Noureldin, O. and El-Sheimy, A.N. (2004). “Introduction to the use of wavelet multiresolution analysis for intelligent structural health monitoring”, Canadian Journal of Civil Engineering, 31(3), 719-731, https://doi.org/10.1139/l04-022.
Tiboni, M., Remino, C., Bussola, R. and Amici, C. (2022). “A review on vibration-based condition monitoring of rotating machinery”, Applied Sciences, 972(12), 1-44, https://doi.org/10.3390/app12030972.
Wan, P., Lei, X., Wu, W., Hu, Q., Wan, L. and Li, G. (2022). “Simulation analysis of coupled structural vibration of highway railway combined bridge induced by overlapping action of vehicle and train”, Geofluids, 2022(1), 1986593, https://doi.org/10.1155/2022/1986593.
Zhong, S. and Oyadiji, S.O. (2008). “Identification of cracks in beams with auxiliary mass spatial probing by stationary wavelet transform”, ASME Journal of Vibration and Acoustics, 130(2), 1-18, https://doi.org/10.1115/1.2891242.
Zhu, X.Q. and Law, S.S. (2006). “Wavelet-based crack identification of bridge beam from operational deflection time history”, International Journal of Solids and Structures, 43(3), 2299-2317. | ||
|
آمار تعداد مشاهده مقاله: 440 تعداد دریافت فایل اصل مقاله: 646 |
||
سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب