پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,573 |
| تعداد مقالات | 71,032 |
| تعداد مشاهده مقاله | 125,502,405 |
| تعداد دریافت فایل اصل مقاله | 98,766,495 |
Comparison of the Mechanical Performance of Concrete Reinforced with Recycled Steel Fibers from Waste Tires and Hooked-End Steel Fibers at Ambient and High Temperatures | ||
| Civil Engineering Infrastructures Journal | ||
| مقاله 4، دوره 57، شماره 1، شهریور 2024، صفحه 61-83 اصل مقاله (1016.3 K) | ||
| نوع مقاله: Research Papers | ||
| شناسه دیجیتال (DOI): 10.22059/ceij.2023.349788.1877 | ||
| نویسندگان | ||
| yaghout Modarres1؛ Mansour Ghalehnovi* 2 | ||
| 1Ph.D. Candidate, Department of Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran. | ||
| 2Professor, Department of Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran. | ||
| چکیده | ||
| In this experimental study, a mechanical and economic analysis has been done to investigate the performance of recycled steel fibers (RSF) from waste tires. Two types of recycled fibers, including Recycled Steel Fibers with Impurities (with a high amount of rubber and textiles) (RSFI) and Clean Recycled Steel Fibers (CRSF), have been investigated. Recycled fiber's performance has been compared to Industrial Steel Fibers (ISF); these fibers have hook ends. The mechanical properties of normal concrete and concrete reinforced with steel fibers, including compressive strength, splitting tensile strength, and flexural strength, were investigated at ambient temperature and temperatures of 200 °C and 600 °C. The results showed that at ambient temperature and 200 ℃, RSFI decreases the compressive strength of concrete due to the high amount of rubber and textiles, while CRSF has shown results comparable to ISF at all temperatures. The positive effect of RSFI has been observed at 600 ℃ by melting rubber and burning textiles. The specimens reinforced with steel fibers, regardless of their type, improved the tensile strength and modulus of rupture compared to the control specimen at all temperatures. RSFI has shown poorer performance compared to ISF and CRSF. The mechanical and economic analysis showed that CRSF could be a suitable alternative to ISF to strengthen concrete mixtures. | ||
| کلیدواژهها | ||
| Concrete؛ High Temperature؛ Industrial Steel Fibers؛ Recycled Steel Fibers؛ Waste Tires | ||
| مراجع | ||
|
ACI Committee 2011. (1996). Standard practice for selecting proportions for normal, heavyweight, and mass concrete, American Concrete Institute, 1-38.
Aiello, M.A., Leuzzi, F., Centonze, G. and Maffezzoli, A. (2009). ”Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength”, Waste Management, 29(6), 1960-1970, https://doi.org/10.1016/j.wasman.2008.12.002.
Alsaif, A., Bernal, S.A., Guadagnini, M. and Pilakoutas, K. (2018). ”Durability of steel fibre reinforced rubberised concrete exposed to chlorides”, Construction and Building Materials, 188, 130-142.
ASTM-C-1018-97. (1997). Standard test method for flexural toughness and first-crack strength of fiber-reinforced concrete (Using beam with third-point loading), American Society for Testing and Materials, West Conshohocken, PA: ASTM International.
ASTM-C-1609. (2012). Standard test method for flexural performance of fiber- reinforced concrete (Using beam with third-point loading), American Society for Testing and Materials, West Conshohocken, PA: ASTM International.
ASTM-C-39. (2018). Standard test method for compressive strength of cylindrical concrete specimens, American Society for Testing and Materials, West Conshohocken, PA: ASTM International.
ASTM-C494-13. (2015). Standard specification for chemical admixtures for concrete, American Society for Testing and Materials, West Conshohocken, PA: ASTM International.
ASTM-C496-C496M-11. (2004). Standard test method for splitting tensile strength of cylindrical concrete specimens, American Society for Testing and Materials, West Conshohocken, PA: ASTM International.
Awolusi, T.F., Oke, O.L., Atoyebi, O.D., Akinkurolere, O.O. and Sojobi, A.O. (2021). ”Waste tires steel fiber in concrete: A review”, Innovative Infrastructure Solutions, 6(1), 1-12, https://doi.org/10.1007/s41062-020-00393-w.
Barros, J.A., Frazão, C., Caggiano, A., Folino, P., Martinelli, E., Xargay, H., Zamanzadeh, Z. and Lourenço, L. (2017). ”Cementitious composites reinforced with recycled fibres”, Recent Advances on Green Concrete for Structural Purposes: The Contribution of the EU-FP7 Project EnCoRe, 141-195, https://doi.org/10.1007/978-3-319-56797-6_8.
Bedewi, N. (2009). ”Steel fiber reinforced concrete made with fibers extracted from used tyres”, M.Sc. Thesis in Civil Engineering, Addis Ababa University, Addis Ababa, Ethiopia.
Behfarnia, K. and Behravan, A. (2014). ”Application of high performance polypropylene fibers in concrete lining of water tunnels”, Materials and Design, 55, 274-279, https://doi.org/10.1016/j.matdes.2013.09.075.
Bezerra, A.C., Maciel, P.S., Corrêa, E.C., Soares Junior, P.R., Aguilar, M.T. and Cetlin, P. R. (2019). ”Effect of high temperature on the mechanical properties of steel fiber-reinforced concrete”, Fibers, 7(12), 100, https://doi.org/10.3390/fib7120100.
Bulei, C., Todor, M.P., Heput, T. and Kiss, I. (2018). ”Directions for material recovery of used tires and their use in the production of new products intended for the industry of civil construction and pavements”, In: IOP Conference Series: Materials Science and Engineering, 294, 012064, https://doi.org/10.1088/1757-899X/294/1/012064.
Dehghanpour, H. and Yılmaz, K. (2018). ”Mechanical and impact behavior on recycled steel fiber reinforced cementitious mortars”, Scientific Herald of the Voronezh State University of Architecture and Civil Engineering, 39(3), 67-84.
Frazão, C.M.V. (2019). ”Recycled steel fiber reinforced concrete for Structural elements subjected to chloride attack: Mechanical and durability performance”, PhD Thesis, University of Minho, Braga/Guimarães, Portugal.
Fu, C., Ye, H., Wang, K., Zhu, K. and He, C. (2019). ”Evolution of mechanical properties of steel fiber-reinforced rubberized concrete (FR-RC)”, Composites Part B: Engineering, 160, 158-166, https://doi.org/10.1016/j.compositesb.2018.10.045.
Hager, I. (2014). ”Colour change in heated concrete”, Fire Technology, 50(4), 945-958, https://doi.org/10.1007/s10694-012-0320-7.
Handoo, S.K., Agarwal, S. and Agarwal, S.K. (2002). ”Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperatures”, Cement and Concrete Research, 32(7), 1009-1018, https://doi.org/10.1016/S0008-8846(01)00736-0.
Hossain, K.M.A., Lachemi, M., Sammour, M. and Sonebi, M. (2013). ”Strength and fracture energy characteristics of self-consolidating concrete incorporating polyvinyl alcohol, steel and hybrid fibres”, Construction and Building Materials, 45, 20-29, https://doi.org/10.1016/j.conbuildmat.2013.03.054.
Jamshaid, H. and Mishra, R. (2016). ”A green material from rock: basalt fiber, A review”, The Journal of The Textile Institute, 107(7), 923-937, https://doi.org/10.1080/00405000.2015.1071940.
Karimipour, A., Ghalehnovi, M., Edalati, M. and De Brito, J. (2021). ”Properties of fibre-reinforced high-strength concrete with nano-silica and silica fume”, Applied Sciences, 11(20), 9696, https://doi.org/10.3390/app11209696.
Liew, K.M. and Akbar, A. (2020). ”The recent progress of recycled steel fiber reinforced concrete”, Construction and Building Materials, 232, 117232, https://doi.org/10.1016/j.conbuildmat.2019.117232.
Ma, Q., Guo, R., Zhao, Z., Lin, Z. and He, K. (2015). ”Mechanical properties of concrete at high temperature, A review”, Construction and Building Materials, 93, 371-383, https://doi.org/10.1016/j.conbuildmat.2015.05.131.
Mastali, M., Dalvand, A., Sattarifard, A.R. and Illikainen, M. (2018a). ”Development of eco-efficient and cost-effective reinforced self-consolidation concretes with hybrid industrial/recycled steel fibers”, Construction and Building Materials, 166, 214-226, https://doi.org/10.1016/j.conbuildmat.2018.01.147.
Mastali, M., Dalvand, A., Sattarifard, A.R., Abdollahnejad, Z. and Illikainen, M.J.C.P.B.E. (2018b). “Characterization and optimization of hardened properties of self-consolidating concrete incorporating recycled steel, industrial steel, polypropylene and hybrid fibers”, Composites Part B: Engineering, 151, 186-200, https://doi.org/10.1016/j.compositesb.2018.06.021.
Memon, S.A., Shah, S. F. A., Khushnood, R. A., and Baloch, W. L. (2019). ”Durability of sustainable concrete subjected to elevated temperature–A review”, Construction and Building Materials, 199, 435-455. https://doi.org/10.1016/j.conbuildmat.2018.12.040.
Modarres, Y., Ghalehnovi, M., (2022). ”The effect of recycled steel fibers from waste tires on concrete properties”, Civil Engineering Infrastructures Journal, 56(1), 1-18, https://doi.org/10.22059/ceij.2022.339592.1820.
Mohajerani, A., Hui, S.Q., Mirzababaei, M., Arulrajah, A., Horpibulsuk, S., Abdul Kadir, A., Rahman, M.T. and Maghool, F. (2019). “Amazing types, properties, and applications of fibres in construction materials”, Materials, 12(16), 2513, https://doi.org/10.3390/ma12162513.
Ramezani, A., Esfahani, M. (2018). “Evaluation of hybrid fiber reinforced concrete exposed to severe environmental conditions”, Civil Engineering Infrastructures Journal, 51(1), 119-130, https://doi.org/10.7508/ceij.2018.01.007.
Roesler, J.R., Altoubat, S.A., Lange, DA., Rieder, K. A. and Ulreich, G.R. (2006). ”Effect of synthetic fibers on structural behavior of concrete slabs-on-ground”, ACI Materials Journal, 103(1), 3.
Rossli, S. and Ibrahim, I. (2012). ”Mechanical properties of recycled steel tire fibres in concrete”, Technical Report, Faculty of Civil Engineering, University Technology Malaysia.
Shannag, M.J. (2011). ”Characteristics of lightweight concrete containing mineral admixtures”, Construction and Building Materials, 25(2), 658-662, https://doi.org/10.1016/j.conbuildmat.2010.07.025.
Tlemat, H., Pilakoutas, K. and Neocleous, K. (2006). ”Stress-strain characteristic of SFRC using recycled fibres”, Materials and structures, 39(3), 365-377, https://doi.org/10.1007/s11527-005-9009-4.
Wang, Y., Wu, H.C. and Li, V.C. (2000). ”Concrete reinforcement with recycled fibers”, Journal of Materials in Civil Engineering, 12(4), 314-319.
Wu, H., Lin, X. and Zhou, A. (2020). ”A review of mechanical properties of fibre reinforced concrete at elevated temperatures”, Cement and Concrete Research, 135, 106117, https://doi.org/10.1016/j.cemconres.2020.106117.
Xing, Z., Beaucour, A.L., Hebert, R., Noumowe, A. and Ledesert, B. (2015). ”Aggregate’s influence on thermophysical concrete properties at elevated temperature”, Construction and Building Materials, 95, 18-28, https://doi.org/10.1016/j.conbuildmat.2015.07.060.
Yang, J., Peng, G.F., Shui, G.S. and Zhang, G. (2019). ”Mechanical properties and anti-spalling behavior of ultra-high performance concrete with recycled and industrial steel fibers”, Materials, 12(5), 783, https://doi.org/10.3390/ma12050783.
Zhang, P., Kang, L., Wang, J., Guo, J., Hu, S. and Ling, Y. (2020). ”Mechanical properties and explosive spalling behavior of steel-fiber-reinforced concrete exposed to high temperature, A review”, Applied Sciences, 10(7), 2324, https://doi.org/10.3390/app10072324. | ||
|
آمار تعداد مشاهده مقاله: 675 تعداد دریافت فایل اصل مقاله: 564 |
||
سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب