CFD Simulation of Concap Tray Hydrodynamics | ||
| Journal of Chemical and Petroleum Engineering | ||
| مقاله 4، دوره 47، شماره 1، شهریور 2013، صفحه 39-50 اصل مقاله (1.25 M) | ||
| شناسه دیجیتال (DOI): 10.22059/jchpe.2013.2977 | ||
| نویسندگان | ||
| Mohammed Rahim Ostadzehi1؛ Rahbar Rahimi1؛ Taleb Zarei* 2؛ Mortaza Zivdar1 | ||
| 1Department of Chemical Engineering, University of Sistan and Baluchestan, Zahedan, Iran | ||
| 2Department of Mechanical Engineering, University of Hormozgan,BandarAbbas, Iran | ||
| چکیده | ||
| This research includes both experimental and CFD investigation in the hydrodynamic behavior of a new type of column tray introduced as “Concap” tray. The proposed column tray is used in contactor columns especially in stripping columns. The hydrodynamics of this Concap tray is investigated in a 1.2m in diameter column. Using air-water system, the experiments were performed for different liquid and vapor loads at constant ambient temperature and pressure. The clear liquid height and total pressure drop were measured. The results were compared with the experimental data of a valve tray in the same column simulator rig. The total pressure drop and clear liquid height of Concap tray were similar to a valve tray, having equal 14% open holes area. Liquid velocity distribution on the tray has been predicted by CFD and is reported. | ||
| کلیدواژهها | ||
| CFD؛ Distillation؛ Concap tray؛ Valve tray؛ Hydrodynamics | ||
| مراجع | ||
|
| ||
|
آمار تعداد مشاهده مقاله: 3,738 تعداد دریافت فایل اصل مقاله: 3,240 |
||