تعداد نشریات | 192 |

تعداد شمارهها | 4,616 |

تعداد مقالات | 50,691 |

تعداد مشاهده مقاله | 86,005,891 |

تعداد دریافت فایل اصل مقاله | 69,607,339 |

## Modeling environmental indicators for land leveling, using Artificial Neural Networks and Adaptive Neuron-Fuzzy Inference System | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Pollution | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

مقاله 7، دوره 3، شماره 4، زمستان 2017، صفحه 595-612
اصل مقاله (1.36 MB)
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

نوع مقاله: Original Research Paper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

شناسه دیجیتال (DOI): 10.22059/poll.2017.62776 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

نویسندگان | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Isham Alzoubi^{1}؛ Mahmoud R. Delavar ^{} ^{1}؛ Farhad Mirzaei^{2}؛ Babak Nadjar Arrabi^{3}
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

^{1}Department of Surveying and Geometric Engineering, Engineering Faculty,University of Tehran, Iran | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

^{2}College of Agriculture and Natural resources, University of Tehran, Iran | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

^{3}School of Electrical and Computer Eng., College of Eng., University of Tehran,Iran | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

چکیده | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Land leveling is one of the most important steps in soil preparation and cultivation. Although land leveling with machines requires considerable amount of energy, it delivers a suitable surface slope with minimal soil deterioration as well as damage to plants and other organisms in the soil. Notwithstanding, in recent years researchers have tried to reduce fossil fuel consumption and its deleterious side effects, using new techniques such as Artificial Neural Networks (ANNs) and Adaptive Neuron-Fuzzy Inference System (Fuzzy shell-clustering algorithm) models that will lead to a noticeable improvement in the environment. The present research investigates the effects of various soil properties such as Embankment Volume, Soil Compressibility Factor, Specific Gravity, Moisture Content, Slope, Sand Percent, and Soil Swelling Index in energy consumption. The study consists of 90 samples, collected from three different regions. The grid size has been set on 20 m * 20 m from a farmland in Karaj Province, Iran. The aim is to determine the best linear model, using ANNs and ANFIS model to predict environmental indicatorsand find the best model for land leveling in terms of its output (i.e. Labor Energy, Fuel energy, Total Machinery Cost, and Total Machinery Energy). Results show that ANFIS can successfully predict labor energy, fuel energy, total machinery cost, and total machinery energy. All ANFIS-based models have R^{2} values above 0.995 and MSE values below 0.002 with higher accuracy in prediction, given their higher R^{2} value and lower RMSE value. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

کلیدواژهها | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

ANFIS؛ Artificial Neural Network؛ Energy؛ environmental research؛ land levelling | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

اصل مقاله | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

During the last century due to increasing human population, demands for agricultural commodities have risen enormously. In addition, currently one of the cardinal environmental challenges in the world is production and consumption of energy. Despite using modern types of energy such as solar energy, inappropriate use and lack of proper management have led to an intensive rise in energy consumption in this field. It should be taken into account that environmental conservation and market globalization will depend on food security in future agriculture (Jat et al., 2006). Accordingly, some special policies ought to be addressed so that an energy viewpoint can be considered in conjunction with environmental issues to solve the problem. Land leveling is one of the heavy and costly operations among agricultural practices that consumes considerable amount of energy. What is more, moving heavy machines on the ground makes the soil denser, particularly in wet regions where the moisture contents of the soil is higher, leading to a situation, not easily recoverable (Khan et al., 2007). On the other hand, land leveling simplifies irrigation and improves field situations in other practices, related to agriculture, regulating the soil surface and normalizing its slope (Brye et al., 2006). Reportedly, there are three significant factors, having effect on grain yield, including the effects of land leveling, methods of water application, and the interaction between the two. Okasha et al. (2013) observed a noteworthy connection between slope and diverse irrigation scheme in different seasons. Diverse methods of land leveling can affect the physical and chemical properties of the soil, hence they can make differences in plant establishment, root growth, aerial cover, and eventually crop yield. As a direct result, one of the most important steps in soil preparation and a key factor in food production, to be optimized, is land leveling (Cassel et al., 1982). Besides, decreasing consumption of fossil fuel for land leveling diminishes air contaminants and improves the environmental condition. There is growing understanding about the importance and impacts of water and soil management which in turn reveals the significance of optimized laser land levelling from social, financial, and agronomic points of view (McFarlane et al., 2006). An artificial neural network paradigm, known as the temporal back propagation neural network (TBP-NN), is successfully demonstrated as a monthly rainfall –runoff model (Sajikumar & Thandaveswara, 1999). An ANN with sufficient complexity is capable of approximating any smooth function to any desired degree of accuracy. In addition, ANNs are computationally robust, capable of learning and generalizing from examples to give meaningful solutions to problems even when the input data are either erroneous or incomplete (Luk et al., 2000). ANN is a conceptual technique, the output or inferred variable of which can be modeled in terms of other parameters, relevant to the same process (Rallo et al., 2002). It has been widely used in the field of engineering for optimization and prediction. Ahmadi et al. (2014) proposed ANNs, trained with Particle Swarm Optimization (PSO) and Back-Propagation (BP) algorithm to estimate the equilibrium water dew point of a natural gas stream with a TEG solution at different TEG concentrations and temperatures. They reported that this approach, namely PSO-ANN, can help better understand fluid reservoirs’ behavior through simulation scenarios, giving statistical results that were quite considerable. In another research a feed-forward ANN, optimized by PSO, was used as an artificial intelligence modeling tool to predict asphalting precipitation due natural depletion (Ahmadi & Golshadi, 2012). They also proposed another network, based on feed-forward ANN and optimized by (HGAPSO), comparing it with conventional BP-ANNs. They reported that results of this approach were better than conventional methods, based on statistical analysis (Ahmadi et al., 2013). These techniques have been also used to predict parameters with declining uncertainty. In a research, Ahmadi et al. (2015) used artificial intelligence techniques to accurately determine the amount of Dissolved Calcium Carbonate Concentration in oil field brines with minimum uncertainty. In another research Gautam and Holz (2001) explored the effectiveness and applicability of adaptive neuron-fuzzy-system-based on rainfall-runoff models for simulation and forecasting. Therefore, they proposed an adaptive neuron-fuzzy system with autoregressive exogenous input (ARX) structure, presenting an application for modeling rainfall-runoff processes in the Sieve basin, Italy. In another study, Multi-Layer Perceptron (MLP)-ANN models and adaptive network-based fuzzy inference system (ANFIS) models were adopted in order to predict and simulate the groundwater level of Lammed plain. The results were obtained by emphasizing higher accuracy and lower scattering for modeling ANFIS, where RMSE and R2 turned out to be 0.9987 and 0.0163 in training stage, and 0.9753 and 0.0694 in test stage, respectively (Fereydooni & Mansoori, 2015). ANN and ANFIS were also used to predict the subsurface water level in paddy fields of Plain Areas between Trajan and Nectarous Rivers. The correlation coefficient of the proposed models were 0.8416 and 0.8593, with their RMSE being 0.2667 and 0.249, respectively (Mohammadi et al., 2009; Lei et al., 2006). Imperialist competitive algorithm simulates an optimization problem by analogizing variables to colony and imperial countries. This method has been widely used in solving engineering problems (Abdechiri et al., 2011) such as data clustering (Ebrahimzadeh et al., 2012), Nash balance point attainment (Rajabioun et al., 2008), ANNs training (Zhang, 2012) composite constructions (Abdi et al., 2011), production administration complications (Nazari-Shirkouhi et al., 2010), and optimization complications (Ahmadi and Golshadi, 2012). Environmental Impact Assessment (EIA) has been also addressed in the literature, involving the investigation and estimation of scheduled events with an eye on ensuring environmentally-sound and sustainable improvements (Toro et al., 2010). In another study, Akbarzadeh et al. (2009) developed an ANFIS model to estimate soil erosion, while a further research (Krueger et al., 2011) evaluated characterization of root distribution patterns under field conditions with ANFIS model. Zhu and Fujitha (1994) compared a feed-forward ANN model to predict a 3-hour lead-runoff, employing a fuzzy reasoning in rainfall–runoff modelling performance. They took into account the phenomenon's dependence on time by using a window of rainfall inputs. Recently, neural networks based researches have implemented semantic-based fuzzy neural architecture, instead of black box approach (Ang & Quek, 2005). Since, land levelling with machines requires considerable energy, it is expected to optimize energy consumption in the levelling operation. As a result, this paper tests two approaches, namely Integrating Artificial Neural Networks (ANNs) and Adaptive Neuro-Fuzzy Inference System (Fuzzy shell clustering algorithm) models and evaluates them in terms of their prediction of environmental indicators for land leveling. Moreover, since there has been a limited number of studies, associated with energy consumption in land leveling, the objective of the current energy and cost research is to find a function for all indices of land leveling, including the slope, coefficient of swelling, soil density, soil moisture, special weight dirt, and the swelling.
In order to verify the accuracy and applicability of the proposed linear model, a case study was carried out based on the project's requirements in a farmland in Karaj, Iran. The farm area was 70 hectare big and was located west of Karaj, 31° 28' 42'' north latitude and 48° 53' 29'' east longitude. Topographic maps of the farm were plotted at scale of 1:500. The length, width, and height of the points, from a reference point (coordinates of x, y, and z), were considered the outputs. The grid size in the case study region was 20*20 m,during the topographical operations. Samples were collected from two different sites inside the region at two different depths: surface soil (0−10 cm) and subsurface soil (10−30 cm). In total 90 samples (30 from each location and 15 from each depth) were collected from 3 lands. In the next step, every five samples were mixed to create one sample. In this way, the total 90 samples were converted into 18 composite soil samples for convenient laboratory analysis. In the laboratory, collected moist soil samples were firstly sieved through 10mm mesh sieve to remove gravel, small stones, coarse roots, and plant remnants, then to be passed through 2 mm sieve. Afterwards, the sieved samples were dried at room temperature and their moisture content, texture, bulk density, land slope, and soil optimum density were determined.
This research applied ANN and ANFIS (Fuzzy shell clustering algorithm) techniques as two methods of Computational Intelligence (CI) to predict the energy consumption of land leveling at various field conditions (two levels of moisture contents, three levels of inflation pressure, three tillage depths) and finally their performances were evaluated and compared, and the optimal models, identified. The ANN model with back-propagation algorithm was developed, using MATLAB software (Mathworks, Inc). The developed ANN in the present study was characterized by three layers: an input layer, a hidden layer, and an output layer. The obtained data was divided into three randomly-selected subsets: the training set, the testing set, and the validation set. Some papers use 70% of the dataset for training purposes with the remaining 30% for model validation and testing. Training set (input vectors and the corresponding target vectors) were used to train the network to find a function, associating input vectors with the specific output vector. Within the development of the ANFIS prediction models, the available data were divided, similar to ANN modeling, into two randomly-selected subsets: training and testing datasets with the former used to develop and calibrate the model, while the latter (also known as the validation dataset), not used in the development of the model, was utilized to validate the trained model. The ANFIS and ANN were applied to perform prediction models with seven inputs and four single outputs. The input parameters were soil cut/fill volume, soil compressibility factor, specific gravity, moisture content, slope, percentage of sand, and soil swelling index. The output of each model included labor energy, fuel energy, total machinery cost, and total machinery energy. Prior to utilization of the dataset for modeling, the inputs and target output were normalized or scaled linearly between -1 and 1, in order to increase the performance and speed of ANN and ANFIS models (Luk et al., 2000): (1) where is the normalized input variable; , the raw input variable; and and , the minimum and maximum rates of the input variable, respectively.
ANNs are massively parallel-distributed information processors that have certain performance characteristics, resembling biological neural networks of human brain (Movagharnejad & Nikzad, 2007). They have been developed as a generalization of mathematical models of human biological neural system (Mohammadi et al., 2009). There are a lot of structure types of ANN models. This study used a typical feed forward back propagation (BP) MLP structure. The main advantage of MLP structures over other types is that they have the ability to learn complex relations between input and output patterns, which would be difficult to model with conventional algorithmic methods (Azadeh et al., 2008). An ANN structure usually consists of an input layer, followed by one or more hidden layers as well as an output layer. The input nodes are the previous lagged observations, while the output provides the forecast for future values. Hidden nodes with appropriate nonlinear transfer functions were used to process the information, received by the input nodes. The model can be written as follows (Azadeh et al., 2008): , where β, the weights from the input to hidden nodes The weights of the arcs, leading from the bias terms, are represented by _{ij}αand _{0}β_{0j}_{, }whose values are always equal to 1, while f is a sigmoid transfer function (Shakibai and Koochekzadeh, 2009).Multiple layers of neurons with nonlinear transfer functions allow the network to learn nonlinear and linear relations between the input and output parameters (Tiryaki, 2008). The linear output layer lets the network to take any values even outside the range of −1 to +1, while if the last layer of a multilayer network has sigmoid neurons, the network outputs will be only in a limited range (Tiryaki, 2008). Input variables included specific gravity, density, moisture content, slope, inflation rate, and type of the cut soil. Relevantly, output variables were fuel energy, machinery energy, labor power, total cost, and energy consumption. In this study, all available datasets were used for regression modeling; however, for development of ANN model, the data were randomly divided into two groups of training (consisted of 80% of all data) and testing (the remaining 20%) datasets (Diamantopoulou, 2005). Several architectures of MLP type became the subject of investigation in order to find the one that could result in the best overall performance. The learning rules of Momentum and Levenberg Mar quart were taken into consideration and also no transfer function was used for the first layer. For the hidden layers, the sigmoid and hyperbolic tangent transfer functions were applied, while for the last one a linear transfer function was set. Also, a number of different network sizes and learning parameters were tried. The ANN system, applied for the predictor models, had seven inputs and four outputs. These inputs included soil cut/fill volume, soil compressibility factor, specific gravity, moisture content, slope, percentage of sand, and soil swelling index, whereas the outputs of each model were labor energy, fuel energy, total machinery cost, and total machinery energy. Fig.1 shows the schematic architecture of the used ANN. As aforementioned, the main elements of ANNs are constituted by artificial neurons. The input model consisted of dendritic nodes, similar to a biological cell that could be represented as a vector with n items S.(3) where S quantity is then passed to a non-linear activation function f, yielding the following output:(4) Non-linear transfer function is usually represented as sigmoid functions and is defined as: (5) The output of This research has used the three-layer perceptron network, which is composed of an input layer, one hidden layer of computational modes, and an output layer. In each layer, a number of neurons were considered that were connected to the neighboring neurons via some associations. In these networks, the effective input of each neuron was obtained from the multiplication of the outputs of the previous neurons by the weights of those neurons. The neurons in the first layer received the input information and transferred it to hidden neurons through related connections. The input signal in such networks can only be expanded in a forward direction. The main advantage of such a network is its simplicity of model implementation as well as input/output data estimation. Yet, some of its major shortcomings are the low training rate and need for a huge set of data.
ANFIS is a suitable and well-known technique for modeling complex systems that face uncertainty (Buragohain & Mahanta, 2008). It uses a learning algorithm, derived from or inspired by neural network theory, to determine fuzzy sets and fuzzy rules by processing data samples (Lin & Lee, 1996). Fuzzy sets provide a framework to incorporate human knowledge in problems' solution, being the basis of adaptive network-based fuzzy inference system (ANFIS). In fuzzy logic theory, the sets are associated with set membership. Compared to traditional binary sets or “crisp sets” where membership is either ‘1’, typically indicating true, or ‘0’, indicating false, fuzzy logic variables range between 0 and 1. Thus, fuzzy logic deals with approximate reasoning rather than fixed and exact one (Gonzalez & Woods, 2008). By using hybrid learning methodology, it gives the mapping relation between the input and output data, specifying the best distribution of membership functions (Ying & Pan 2008). By combining ANN and fuzzy logic, ANFIS has many advantages of fuzziness (Avci, 2008). Combination of these two techniques makes ANFIS modeling more systematic and less dependent on expert knowledge (Sengur, 2008a; Ubeyli, 2008). In order to arrange this inference system, five layers are used, each containing several nodes, with the outputs from one layer used as the inputs of the next. To easily specify ANFIS function, a system with two inputs (x, y) and one output (f Rule 1. IF x is A Rule 2. IF y is A
In these rules, the inputs to ANFIS model are specified by x and y and the fuzzy sets are specified by A and B, in which case f Layer 1. Each node _{i}; b_{i}; c_{i}} (or {a_{i}; c_{i}} in the latter case). The node function of the i^{th} node is presented as follows:
Layer 2. By means of multiplication, the ‘firing strength’ of each rule is computed by each node in this layer as follows:
Layer 3. The
Back-propagation gradient descent is the basic learning rule of ANFIS. Error signals are defined as the derivative of the squared error, compared to each node’s output. Back-propagation gradient descent rule computes error signals from the output layer backward to the input layer, and is similar to the back-propagation learning rule, applied in the common feed-forward neural-networks (Rumelhart et al., 1986). The present study has used a hybrid-learning rule, combining the least-squares and gradient descent methods to find a feasible set of antecedent and consequent parameters (Jang, 1991). There are two passes in the hybrid learning methodology for ANFIS. In the backward pass, the error rates propagate backward from output layer to input one, and the premise parameters are updated by the gradient descent approach. In the forward pass the functional signals go forward until layer 4 and the consequent parameters are identified by the least squares estimate. Assuming fixed values for the premise parameters, the overall output can be presented as a linear combination of the consequent parameters as follows (Ying & Pan, 2008):
In hybrid learning algorithm the gradient approach is combined by the least squares approach (Ying & Pan 2008). In the forward pass, consequent parameters are recognized by the least squares estimate (Sengur, 2008a; Ubeyli, 2008). In this study, the inputs have been considered to be moisture, density, soil compressibility factor, Soil Swelling Index (SSI), land slope, percentage of sand, and embankment volume. On the other hand, the outputs have been considered to involve environmental indicators associated with land levelling, i.e. fuel energy, labor energy, machinery energy, and cost of total energy.
In order to predict the energy, consumed for land leveling, fuzzy shell clustering algorithm was applied. This section presents the results of ANFIS models for prediction of Labor Energy (LE), Fuel Energy (FE), Total Machinery Cost (TMC), and Total Machinery Energy (TME). A code was written in MATLAB programming language for ANFIS simulations. Different ANFIS structures were tried, using the programming code and the appropriate representations were determined. Each structure for the corresponding combination was evaluated, using 100 independent runs, and the statistical criteria (R Tables 1 and 2 present the minimum, average, and maximum values of R As presented in Table 1, statistical criteria for prediction of labor energy reveals that FIS model was superior to ANN back propagation model. Average R As presented in Table 2, statistical criteria for prediction of total machinery cost reveals that FIS model was superior to ANN back propagation model. Average R Table 6 compares statistical criteria of sensitivity analysis and neural network models and ANFIS models. As it can be seen from Table 6, the ANFIS model performed, providing better results than the ANN models, based on its higher R
Determining the impact of number of clusters on all developed models is feasible (Fig. 2). Moreover, different optimization methods and FIS types can be easily compared. For the ANFIS-based model, in both training methods, the MSE (R Fig. 2. Statistical performance criteria of LE Fig. 3. Scatter plot for the predicted model and actual values of a) labor energy, b) fuel energy, c) total machinery cost, and d) total machinery energy.
This section gives the results of regression models and training various networks with different structures. The ANN models were developed by training the networks with various combinations of Network Training Functions (NTF), number of hidden layers, and number of neurons in the each hidden layer. To select the best network topology, in total 20678 different ANN models were evaluated and the RMSE and coefficient of determination (R It has been proven that Bayesian regularization has appropriate generalization properties, when used in the training of the NN (Mahersia & Hamrouni, 2015). Scaled conjugate gradient (trainscg) is one of the most popular second-order gradient supervised procedure (Møller, 1993), along with conjugate gradient function (traincgf), which is a network training function that updates related values of weight and bias, based on conjugate gradient back propagation with Fletcher-Reeves updates (Pandey et al., 2012). Resilient back-propagation (trainrp), in which the ordinary gradient descent back-propagation modification, is applied in order to omit the harmful effects of the magnitudes, related to the partial derivatives (Shiblee et al., 2010). Gradient descent with momentum and adaptive learning rate back propagation (traingdx) is a network training function to update bias and weight values, according to gradient descent momentum and adaptive learning rate (Pandey et al., 2012). Gradient descent with adaptive learning rate back propagation (traingda) is a batch gradient descent that runs with variable learning rate (Hagan et al., 1996), and finally gradient descent with momentum back propagation (traingdm) is a network training function, used to update weight and bias values, according to gradient descent with momentum (Pandey et al., 2012). These networks use 10 input data in the input layer to predict the outputs, utilizing a linear function in their output layer to transfer the data to the output. Tables 3 and 4 demonstrate the model outputs, which are the result of 500 thousand runs of the model. The selected NTFs for LE in land leveling, as shown in the first row of Table 3, was the best, as it had the highest correlation coefficient and lowest RMSE. These functions had eight neurons in the first layer, and three neurons in the second.Details of the best trained networks for prediction of LE are shown in Table 2. The NTF of trainlm had higher RMSE and lower R2 for two (8-3) and three (2-7-6) hidden layers, but NTF of trainbr for one hidden layer had the best statistical interpretation. The NTF of trainlm, including two neurons in one hidden layer, is the simplest ANN for forecasting the LE with RMSE, below 0.021 as well as R2 above 0.996. Table 3 gives the details of the selected networks for prediction of FE. The NTF of trainlm had higher RMSE and lower R
ANN Models, shown in Figure 4, show the actual responses versus the predicted ones. As the predicted values come closer to the actual values, the points on the scatterplot come closer to the diagonal line, which is the regression result. Closeness of the points to the line is an evidence of satisfactory performance of the models in prediction of the targets. For a perfect fit, the data should fall along a 45 degree line, where the network outputs are equal to the targets. The training record was used to plot the training, validation, and test performance of the training progress (error against the number of training epochs). Fig. 4. Scatter plots of output vs. target, using ANN models for prediction of LE Fig. 5. Scatter plots of output vs. target, using ANN models for prediction of FE Fig. 6. Scatter plots of output vs. target, using ANN models for prediction of TMC Fig. 7. Scatter plots of output vs. target, using ANN models for prediction of TME
Table 5 compares the statistical criteria of neural network models and ANFIS models. As it can be seen in this table, ANFIS models perform and provide better results than the ANN models, thanks to their higher R
Table 5 Comparison of ANFIS and ANN models
When evaluating the predictive capabilities of ANNs and ANFIS in terms of estimating soil shear strength from measured particle size distribution (clay and fine sand), Calcium Carbonate Equivalent (CCE), results showed that the ANN model was more feasible in predicting the soil shear strength than the ANFIS model. The root mean square error (RMSE), mean estimation error (MEE), and correlation coefficient (R) between the measured soil shear strength and the estimated values, using the ANN model, were 0.05, 0.01, and 0.86, respectively (Besalatpour et al., 2012). Khoshnevisan et al. (2014) used several ANFIS models to predict wheat grain yield on the basis of energy inputs. Moreover, ANNs were developed and the obtained results were compared with ANFIS models. The results illustrated that ANFIS model can predict the yield more precisely than ANN. In another study, MLP-ANN models and ANFIS models were adopted in order to predict and simulate the groundwater level of Lamerd plain. The required results were obtained by emphasizing higher accuracy and lower scattering for modelling ANFIS, with RMSE value of 0.9987 and R In another research, Artificial Neural Network (ANN) and Neuro-Fuzzy inference system (ANFIS) were used to predict the subsurface water level in paddy fields of Plain Areas between Trajan and Nectarous Rivers. The correlation coefficient of these two respective models were 0.8416 and 0.8593, and their RMSE was 0.2667 and 0.2491 (Mohammadi et al., 2009). Kisi and Shiri (2013) compared ANN and ANFIS models for prediction of long-term monthly air temperature, using geographical inputs. They illustrated that the maximum and minimum R
There have been a limited number of researches, related to energy consumption in land leveling, which presented the function of the volume of excavation and embankment. In the present research, however, energy and cost of land leveling were function of all land properties, including the slope, coefficient of swelling, soil density, soil moisture, and special weight dirt. The paper's argument was built on an appropriate theoretical foundation, concepts, and other ideas, and the methods were employed appropriately. This study investigated the ability of Artificial Neural Networks (ANNs) and Adaptive Neuro-Fuzzy Inference System (ANFIS) models for prediction of environmental indicators, namely LE, FE, TMC, and TME, during land leveling. Results were extracted and the statistical analysis was performed, enabling the determination of RMSE and coefficient of determination, R | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

مراجع | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

Abdechiri, M., Faez, K. and Bahrami, H. (2011). Adaptive imperialist competitive algorithm (AICA), cognitive informatics (ICCI). 9th IEEE International Conference, 940: 945.
Abdi, B., Mozafari, H., Ayob, A. and Kohandel, R. (2011). Imperialist competitive algorithm and Its application in optimization of laminated composite structures. Eur. J. Sci. R., 55(2): 174-187.
Ahmadi, M.A. and Golshadi, M. (2012). Neural network based swarm concept for prediction asphaltene precipitation due to natural depletion, Journal of Petroleum Science and Engineering, 98: 40-49.
Ahmadi, M.A., Ahmadi, M.R. and Shadizadeh, S.R. (2013). Evolving artificial neural network and imperialist competitive algorithm for prediction permeability of the reservoir. Appl. Soft. Comput., 23(13): 1085-1098.
Ahmadi, M.A., Bahadori, A. and Shadizadeh, S.R. (2015). A rigorous model to predict the amount of dissolved calcium carbonate concentration throughout oil field brines: Side effect of pressure and temperature. Fuel., 139: 154-159.
Ahmadi, M.A., Soleimani, R. and Bahadori, A.A. (2014). Computational intelligence scheme for prediction equilibrium water dew point of natural gas in TEG dehydration systems. Fuel.: 137, 145-154.
Akbarzadeh, A., Mehrjardi, R., Rouhipour, H., Gorji, M. and Rahimi, H. (2009). Estimating of soil erosion covered with rolled erosion control systems using rainfall simulator (neuro-fuzzy and artificial neural network approaches). J. Appl. Sc. Res., 5: 505-14.
Ang, K.K. and Quek, C. (2005). RSPOP: rough set-based pseudo outer-product fuzzy rule.
Avci, E. (2008). Comparison of wavelet families for texture classification by using wavelet packet entropy adaptive network based fuzzy inference system. Appl. Soft. Comput., 8(1): 225-231.
Azadeh, A., Ghaderi, S.F. and Sohrabkhani, S. (2008). Annual electricity consumption forecasting by neural network in high energy consuming industrial sectors. Energ. Convers. Managet., 49: 2272-2278.
Besalatpour, A., Hajabbasi, M.A., Ayoubi, S., Afyuni, M., Jalalian, A. and Schulin, R. (2012). Soil shear strength prediction using intelligent systems: artificial neural networks and an adaptive neuro-fuzzy inference system. Soil. Sci. Plant. Nutr., 58: 149-160.
Brye, K.R., Slaton, N.A. and Norman, R.J. (2006). Soil physical and biological properties as affected by land leveling in a clayey aquert. Soil. ScI. Soc. Am. J., 70: 631-642.
Buragohain, M. and Mahanta, C. (2008). A novel approach for ANFIS modeling based on full factorial design. Appl. Soft. Comput., 8: 609-625.
Cassel, D., Wood, M. and Bunge, R.P. (1982). Classer lmitogenicity of brain axolemma membranes and soluble factors for dorsal roil ganglion schwann cells. J. Cell.Biochem., 18: 433-445.
Diamantopoulou, M.J. (2005). Artificial neural networks as an alternative tool in pine bark volume estimation. Comput. Electron. Agr., 48: 235-244.
Ebrahimzadeh, A., Addeh, J. and Rahmani, Z. (2012). Control chart pattern recognition using k-mica clustering and neural networks. Isa. T., 51: 111-119.
Fereydooni, M. and Mansoori, B. (2015). Simulation depth of bridge paler scouring using articial neural network and adaptive neuro-fuzzy inference system. Indian. J. Fund. Appl. life Sci., 5: 2091-2095.
Gautam, D.K. and Holz, K.P. (2001). Rainfall-runoff modeling using adaptive neuro-fuzzy systems. J. Hydrol., 3(1): 3-10.
Gonzalez, R.C. and Woods, R.E. (2008). Digital image processing third edition. Upper Saddle River, New Jersey: Pearson Education, Inc.
Hagan, M.T., Demuth, H.B. and Beale, M.H. (1996). Neural network design, pws pub. co., Boston, 3632. identification algorithm. Neural. Comput., 17: 205-243.
Jang, J.R.S. (1991). Fuzzy modeling using generalized neural networks and kaman filter algorithm. Proc. Ninth. Natl .Conf. Artif .Intell., (AAA-91): 762-767.
Jat, M.L., Gupta, R.K. and Rodomiro, R.S. (2006). Diversifying the intensive cereal cropping systems of the indo- ganges through horticulture. Curr. Hortic., 46: 27-31.
Khan, F., Khan, S.U., Sarir, M.S. and Khattak, R.A. (2007). Effect of land leveling on some physico-chemical propertles of soil in district dir lower. Sarhad, J. Agr., 23: 108-114.
Khoshnevisan, B., Rafiee, S., Omid, M. and Mousazadeh, H. (2014). Development of an intelligent system based on ANFIS for predicting wheat grain yield on the basis of energy inputs. Inform. Process. Agr., 1: 1-9; 14-22.
Kisi, O. and Shiri, J. (2013). Prediction of long-term monthly air temperature using geographical inputs. Int. J. Climato. dx.doi.org/10.1002/joc.3676.
Krueger, E., Prior, S.A., Kurtener, D., Rogers, H.H. and Runion, G.B. (2011). Characterizing root distribution with adaptive neuro-fuzzyanalysis. Int. Agrophys., 25: 93-96.
Lei, K., Qiu, Y. and He, Y. (2006). A new adaptive well-chosen inertia weight strategy to automatically harmonize global and local search ability in particle swarm optimization. In Systems and Control in Aerospace and Astronautics, 2006. ISSCAA 2006. 1st International Symposium on, January, IEEE.
Levenberg, K. (1944). A method for the solution of certain non-linear problems in least squares. Q. J. Appl. Math., 2: 164-168.
Lin, C.T. and Lee, C.S.G. (1996). Prentice-Hall Inc., upper Saddle River, NJ, USA.
Luk, K.C., Ball, J.E. and Sharma, A. (2000). A study of optimal model lag and spatial inputs to artificial neural network for rainfall forecasting. J. Hydrol., 227: 56-65.
Mahersia, H. and Hamrouni, K. (2015). Using multiple steerable filters and bayesian regularization for facial expression recognition. Eng. Appl. Artif. Intel., 38: 190-202.
Marquardt, D.W. (1963). An algorithm for least-squares estimation of nonlinear parameters. J soc Ind Appl Math., 11(2): 431-41.
McFarlane, B.L., Stumpf-Allen, R.C.G. and Watson, D.O. (2006). Public perceptions of natural disturbance in Canada’s national parks: the case of the mountain pine beetle (dendroctonus ponderosa hopkins). Biolo. Con., 130: 340-8.
Mohammadi, A., Rafiee, S., Keyhani, A. and Emam-Djomeh, Z. (2009). Modelling of kiwifruit (cv.Hayward) slices drying using artificial neural network. 4th International Conference on Energy Efficiency and Agricultural Engineering, Rousse, Bulgaria., 1-3, 397-404.
Møller, M. F. (1993). A scaled conjugate gradient algorithm for fast supervised learning. Lect. Notes. Comput. Sc., 6(4): 525-533.
Movagharnejad, K. and Nikzad, M. (2007). Modeling of tomato drying using artificial neural network. Comput. Electron. Agr., 59: 78-85.
Nazari-Shirkouhi, S., Eivazy, H., Ghodsi, R., Rezaie, K. and Atashpaz-Gargari, E. (2010). Solving the integrated product mix-outsourcing problem using the imperialist competitive algorithm. Expert. Syst. Appl., 37: 7615-7626.
Okasha, D.E.M., Abdelraouf, R.E. and Abdou, M.A.A. (2013). Effect of land leveling and water applied methods on yield and irrigation water use efficiency of maize (zea mays L.) grown under clay soil conditions. World. Appl. Sci. J., 27(2): 183-190.
Pandey, S., Hindoliya, D.A. and Mod, R. (2012). Artificial neural networks for predicting indoor temperature using roof passive cooling techniques in buildings in different climatic conditions. Appl. Soft. Comput., 12(3): 1214-1226.
Rajabioun, R., Atashpaz-Gargari, E. and Lucas, C. (2008). Colonial competitive algorithm as a tool for nash equilibrium point achievement. Lect. Notes .Comput. Sc., 8: 680-695.
Rallo, R., Ferre-Gin, J., Arenas, A. and Giralt, F. (2002). Neural virtual sensor for the inferential prediction of product quality from process variables. Comput. Chem. Eng., 26: 1735-1754.
Rumelhart, D.E., Hinton, G.E. and Williams, R.J. (1986). Learning internal representations by back-propagating errors. Near. Surf. Geophys., 323: 533-536.
Sajikumar, N. and Thandaveswara, B.S. (1999). A non-linear rainfall– runoff model using an artificial neural network. J. Hydrol., 216: 32-55.
Sengur, A. (2008a). Wavelet transform and adaptive neuro-fuzzy inference system for color texture classiﬁcation. Expert. Sits. Apple., 34: 2120-2128.
Shakibai, A.R. and Koochekzadeh, S. (2009). Modeling and predicting agricultural energy consumption in Iran. American-Eurasian J. Agr. Environ. Sci., 5: 308-312.
Shiblee, M., Chandra, B. and Kalra, P.K. (2010). Learning of geometric mean neuron model using resilient propagation algorithm. Expert. Syst. Appl., 37(12): 7449-7455.
Tiryaki, B. (2008). Predicting intact rock strength for mechanical excavation using multivariate statistics, artificial neural networks, and regression trees. Eng. Geol., 99: 51-60.
Toro, J., Requena, I. and Zambrano, M. (2010). Environmental impact assessment in Colombia: critical analysis and proposals for improvement. Environ. Impact. Asses., 30: 247-261.
Ubeyli, E.D. (2008). Adaptive neuro - fuzzy inference system employing wavelet coefficients for detection of ophthalmic arterial disorders. Expert. Sys. Appl., 34(3): 2201-2209.
Ying, L. and Pan, M. (2008). Using adaptive network based fuzzy inference system to forecast regional electricity loads. Energ. Convers. Manage., 49(2): 205-211.
Zhang, X. (2012). The application of imperialist competitive algorithm based on chaos theory in perceptron neural network. Phys. Procedia., 25: 536-542.
Zhu, M.L. and Fujitha, M. (1994). Comparison between fuzzy reasoning and neural networks methods to forecast runoff discharge. J. Hyrosci. Hydr. Engrg., 12(2): 131-141. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||

آمار تعداد مشاهده مقاله: 1,079 تعداد دریافت فایل اصل مقاله: 587 |