تعداد نشریات | 161 |
تعداد شمارهها | 6,532 |
تعداد مقالات | 70,500 |
تعداد مشاهده مقاله | 124,090,659 |
تعداد دریافت فایل اصل مقاله | 97,194,441 |
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates | ||
Journal of Computational Applied Mechanics | ||
مقاله 10، دوره 48، شماره 2، اسفند 2017، صفحه 253-270 اصل مقاله (2.31 M) | ||
نوع مقاله: Research Paper | ||
شناسه دیجیتال (DOI): 10.22059/jcamech.2017.236722.157 | ||
نویسندگان | ||
Masoud Biglarkhani1؛ Keyvan Sadeghi* 2 | ||
1Civil Engineering Department, Hormozgan University, Bandar Abbas, Iran | ||
2Mechanical Engineering Department, Buein Zahrah Technical University, Qazvin 3451745346, Iran | ||
چکیده | ||
In this paper, the dynamic behavior of square plates with various thicknesses and stiffening configurations subjected to underwater explosion (UNDEX) are evaluated through a relatively novel approach which is called Incremental Explosive Analysis (IEA). The IEA estimates the different limit-states and deterministic assessment of plats’ behavior, considering uncertainty of loading conditions and dynamic nature of explosive loading. In this new approach, intensity parameter of explosive loading is enhanced in an incremental manner and response of the target plate is recorded for every depth-stand-off loading condition. Then, the multi IEA curves are derived from several simulation results. The fractiles method is employed to summarize large amount of IEA curves’ data in a predictive mode. In addition, some summarized damage probability indicators such as fragility curves are extracted that provide useful information for quantitative damage analysis of plates in UNDEX loading. Results show that the IEA is a promising method for performance-based assessment of marine structures subjected to UNDEX loading. | ||
کلیدواژهها | ||
Air-backed plate؛ Underwater explosion (UNDEX)؛ Depth parameter؛ Stand-off distance؛ Incremental explosive analysis (IEA)؛ Intensity parameter؛ Fragility؛ uncertainty | ||
مراجع | ||
[1] R. H. Cole, R. Weller, 1948, Underwater explosions, [2] K. Ramajeyathilagam, C. Vendhan, V. B. Rao, Non-linear transient dynamic response of rectangular plates under shock loading, International Journal of Impact Engineering, Vol. 24, No. 10, pp. 999-1015, 2000. [3] H. Gharababaei, A. Darvizeh, M. Darvizeh, Analytical and experimental studies for deformation of circular plates subjected to blast loading, Journal of mechanical Science and Technology, Vol. 24, No. 9, pp. 1855-1864, 2010. [4] A. Bayat, R. Moharami, Numerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe, Journal of Computational Applied Mechanics, Vol. 47, No. 1, pp. 121-128, 2016. [5] R. Rajendran, J. Paik, J. Lee, Of underwater explosion experiments on plane plates, Experimental Techniques, Vol. 31, No. 1, pp. 18-24, 2007. [6] R. Rajendran, K. Narashimhan, Performance evaluation of HSLA steel subjected to underwater explosion, Journal of Materials Engineering and Performance, Vol. 10, No. 1, pp. 66-74, 2001. [7] C. Hung, P. Hsu, J. Hwang-Fuu, Elastic shock response of an air-backed plate to underwater explosion, International Journal of Impact Engineering, Vol. 31, No. 2, pp. 151-168, 2005. [8] N. Gupta, P. Kumar, S. Hegde, On deformation and tearing of stiffened and un-stiffened square plates subjected to underwater explosion—a numerical study, International Journal of Mechanical Sciences, Vol. 52, No. 5, pp. 733-744, 2010. [9] L. Li, W. Jiang, A new effective method to predict the permanent deformation of plane plates subjected to underwater shock loading, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 225, No. 5, pp. 1069-1075, 2011. [10] R. Rajendran, Numerical simulation of response of plane plates subjected to uniform primary shock loading of non-contact underwater explosion, Materials & Design, Vol. 30, No. 4, pp. 1000-1007, 2009. [11] R. Rajendran, Reloading effects on plane plates subjected to non-contact underwater explosion, Journal of materials processing technology, Vol. 206, No. 1, pp. 275-281, 2008. [12] P. Ren, W. Zhang, Underwater shock response of air-backed thin aluminum alloy plates: An experimental and numerical study, in Proceeding of, IOP Publishing, pp. 182034. [13] R. Rajendran, K. Narasimhan, Deformation and fracture behaviour of plate specimens subjected to underwater explosion—a review, International Journal of Impact Engineering, Vol. 32, No. 12, pp. 1945-1963, 2006. [14] G.-S. Yeom, Numerical study of underwater explosion near a free surface and a structural object on unstructured grid, Journal of Mechanical Science and Technology, Vol. 29, No. 10, pp. 4213-4222, 2015. [15] M. Grujicic, B. Pandurangan, C. Zhao, B. Cheeseman, A computational investigation of various water-induced explosion mitigation mechanisms, Multidiscipline Modeling in Materials and Structures, Vol. 3, No. 2, pp. 185-212, 2007. [16] G. Wang, S. Zhang, M. Yu, H. Li, Y. Kong, Investigation of the shock wave propagation characteristics and cavitation effects of underwater explosion near boundaries, Applied Ocean Research, Vol. 46, pp. 40-53, 2014. [17] D. Vamvatsikos, C. A. Cornell, Incremental dynamic analysis, Earthquake Engineering & Structural Dynamics, Vol. 31, No. 3, pp. 491-514, 2002. [18] D. Vamvatsikos, C. A. Cornell, The incremental dynamic analysis and its application to performance-based earthquake engineering, in Proceeding of, Citeseer, pp. [19] D. Vamvatsikos, C. A. Cornell, Applied incremental dynamic analysis, Earthquake Spectra, Vol. 20, No. 2, pp. 523-553, 2004. [20] A. Zacharenaki, M. Fragiadakis, D. Assimaki, M. Papadrakakis, Bias assessment in Incremental Dynamic Analysis due to record scaling, Soil Dynamics and Earthquake Engineering, Vol. 67, pp. 158-168, 2014. [21] M. Alembagheri, M. Ghaemian, Damage assessment of a concrete arch dam through nonlinear incremental dynamic analysis, Soil Dynamics and Earthquake Engineering, Vol. 44, pp. 127-137, 2013. [22] P. Tehrani, D. Mitchell, Seismic performance assessment of bridges in Montreal using incremental dynamic analysis, in Proceeding of. [23] A. Ajamy, M. Zolfaghari, B. Asgarian, C. Ventura, Probabilistic seismic analysis of offshore platforms incorporating uncertainty in soil–pile–structure interactions, Journal of Constructional Steel Research, Vol. 101, pp. 265-279, 2014. [24] B. Asgarian, A. Ajamy, Seismic performance of jacket type offshore platforms through incremental dynamic analysis, Journal of Offshore Mechanics and Arctic Engineering, Vol. 132, No. 3, pp. 031301, 2010. [25] M. Zolfaghari, A. Ajamy, B. Asgarian, A simplified method in comparison with comprehensive interaction incremental dynamic analysis to assess seismic performance of jacket-type offshore platforms, International Journal of Advanced Structural Engineering (IJASE), Vol. 7, No. 4, pp. 353-364, 2015. [26] A. Golafshani, V. Bagheri, H. Ebrahimian, T. Holmas, Incremental wave analysis and its application to performance-based assessment of jacket platforms, Journal of Constructional Steel Research, Vol. 67, No. 10, pp. 1649-1657, 2011. [27] M. Zeinoddini, H. M. Nikoo, H. Estekanchi, Endurance Wave Analysis (EWA) and its application for assessment of offshore structures under extreme waves, Applied Ocean Research, Vol. 37, pp. 98-110, 2012. [28] K. Wei, S. R. Arwade, A. T. Myers, Incremental wind-wave analysis of the structural capacity of offshore wind turbine support structures under extreme loading, Engineering Structures, Vol. 79, pp. 58-69, 2014. [29] R. A. Izadifard, M. R. Maheri, Application of displacement-based design method to assess the level of structural damage due to blast loads, Journal of mechanical science and technology, Vol. 24, No. 3, pp. 649-655, 2010. [30] B. Le Méhauté, S. Wang, 1996, Water waves generated by underwater explosion, World Scientific, [31] U. Army, U. Navy, U. A. Force, Structures to resist the effects of accidental explosions, TM5-1300, pp. 1400, 1990. [32] G. Farin, 2014, Curves and surfaces for computer-aided geometric design: a practical guide, Elsevier, [33] E. T. Lee, Choosing nodes in parametric curve interpolation, Computer-Aided Design, Vol. 21, No. 6, pp. 363-370, 1989. [34] H. Huang, Transient interaction of plane acoustic waves with a spherical elastic shell, The Journal of the Acoustical Society of America, Vol. 45, No. 3, pp. 661-670, 1969. [35] H. Huang, An exact analysis of the transient interaction of acoustic plane waves with a cylindrical elastic shell, Journal of Applied Mechanics, Vol. 37, No. 4, pp. 1091-1099, 1970. [36] T. AUTODYN, Theory Manual Revision 4.3, Concord, CA: Century Dynamics, Inc, 2003. [37] F. Hajializadeh, M. M. Mashhadi, Investigation and numerical analysis of impulsive hydroforming of aluminum 6061-T6 tube, Journal of Manufacturing Processes, Vol. 20, pp. 257-273, 2015. [38] W. Feller, 2008, An introduction to probability theory and its applications, John Wiley & Sons, | ||
آمار تعداد مشاهده مقاله: 1,358 تعداد دریافت فایل اصل مقاله: 968 |