تعداد نشریات | 161 |
تعداد شمارهها | 6,532 |
تعداد مقالات | 70,501 |
تعداد مشاهده مقاله | 124,098,359 |
تعداد دریافت فایل اصل مقاله | 97,206,024 |
Numerical Evaluation of Progressive Collapse Potential in Reinforced Concrete Buildings with Various Floor Plans Due to Single Column Removal | ||
Civil Engineering Infrastructures Journal | ||
مقاله 10، دوره 51، شماره 2، اسفند 2018، صفحه 405-424 اصل مقاله (2.2 M) | ||
نوع مقاله: Research Papers | ||
شناسه دیجیتال (DOI): 10.7508/ceij.2018.02.010 | ||
نویسندگان | ||
Freydoon Rezaie* 1؛ Seyed Mehdi Fakhradini2؛ Masoud Ghahremannejad3 | ||
1Department of Civil Engineering, Bu-Ali Sina University, 65178-38695 Hamedan, Iran | ||
2Department of Civil Engineering, Faculty of Engineering, Bu-Ali Sina University, Hamedan, Iran. | ||
3Center of Structural Engineering Research/Simulation, Department of Civil Engineering, The University of Texas at Arlington, United States | ||
چکیده | ||
Progressive collapse is defined as the spread of an initial damage from one member to another, leading to extensive partial or total collapse of the structure. In this research, the potential of progressive collapse due to a sudden removal of vertical load-bearing elements in reinforced concrete buildings structures with different floor plans such as geometrical regular and irregular floor plans as well as floor plans with and without torsional irregularity were assessed. The buildings were designed according to ACI 318-14 provisions and Iranian seismic code. The progressive collapse potential of the structures was assessed following of a sudden column or shear wall removal in different locations in their first floor using nonlinear dynamic analysis (NDA). Displacement sensitivity and column sensitivity indexes were utilized to compare different cases of load-bearing element removal in each model. Results indicated that in all geometrical regular floor plan, floor plan with reentrant corner and floor plan with torsional irregularity, the most critical case of column removal was removing columns located in outer corners of the plan. In addition, removing external columns was more critical than internal columns. In buildings with shear walls, removing shear walls led to much more critical scenarios than removing columns. Furthermore, results revealed that buildings with torsional irregularity floor plan, designed according to Iranian seismic code, had a lower potential of progressive collapse rather than those buildings with no irregularity. | ||
کلیدواژهها | ||
Nonlinear Dynamic Analysis؛ Progressive Collapse؛ R.C. Buildings؛ Regular and Irregular Plans؛ Sudden Element Removal | ||
مراجع | ||
Abdollahzadeh, G., Nemati, M. and Avazeh, M. (2016). "Probability assessment and risk management of progressive collapse in strategic buildings facing blast loads", Civil Engineering Infrastructures Journal, 49(2), 327-338.
American Concrete Institute (ACI). (2014). Building code requirements for structural concrete and commentary, (ACI 318-14), Detroit, Michigan.
Arshian, A.H., Morgenthal, G. and Narayanan, S. (2016). "Influence of modelling strategies on uncertainty propagation in the alternate path mechanism of reinforced concrete framed structures", Engineering Structures, 110, 36-47.
Arshian, A.H. and Morgenthal, G. (2017). "Three-dimensional progressive collapse analysis of reinforced concrete frame structures subjected to sequential column removal", Engineering Structures, 132, 87-97.
ASCE/SEI41, (2006). Seismic evaluation and retrofit of existing buildings (ASCE/SEI 41-06), American Society of Civil Engineers, New York.
Department of Defense (DoD). (2016). Design of Building to Resist Progressive Collapse, Unified Facilities Criteria (UFC 4-023-03), Washington D.C.
Ellingwood, B.R. (2006). "Mitigating risk from abnormal loads and progressive collapse", Journal of Performance of Constructed Facilities, 20(4), 315-323.
General Service Administration (GSA). (2013). Alternate Path Analysis and Design Guidelines for Progressive Collapse Resistance, Washington D.C.
Ghahremannejad, M. and Park, Y. (2016). "Impact on the number of floors of a reinforced concrete building subjected to sudden column removal", Engineering Structures, 111, 11-23.
Helmy, H., Salem, H. and Mourad, S. (2012). "Progressive collapse assessment of framed reinforced concrete structures according to UFC guidelines for alternative path method", Engineering Structures, 42, 127-141.
Iranian Code of Practice for Seismic Resistant Design of Buildings. (2014). Standard 2800, 4th Edition. Building and Housing Research Center.
Kim, J. and Kim, T. (2009). "Assessment of progressive collapse-resisting capacity of steel moment frames", Journal of Constructional Steel Research, 65(1), 169-179.
Kordbagh, B. and Mohammadi, M. (2017). "Influence of seismicity level and height of the building on progressive collapse resistance of steel frames", The Structural Design of Tall and Special Buildings, 26(2), e1305.
Li, M. and Sasani, M. (2015). "Integrity and progressive collapse resistance of RC structures with ordinary and special moment frames", Engineering Structures, 95, 71-79.
Mander, J.B., Priestley, M.J. and Park, R. (1988). "Theoretical stress-strain model for confined concrete", Journal of Structural Engineering, 114(8), 1804-1826.
Marjanishvili, S.M. (2004). "Progressive analysis procedure for progressive collapse", Journal of Performance of Constructed Facilities, 18(2), 79-85.
Martinelli, P. and Filippou, F.C. (2009). "Simulation of the shaking table test of a seven-story shear wall building", Earthquake Engineering and Structural Dynamics, 38(5), 587-607.
Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2016). OpenSees command language manual, Pacific Earthquake Engineering Research Center, Berkeley, University of California, http://opensees.berkeley.edu.
Pachenari, A., Keramati, A. and Pachenari, Z. (2013). "Investigation of progressive collapse in intermediate RC frame structures", The Structural Design of Tall and Special Buildings, 22(2), 116-125.
Pearson, C. and Delatte, N. (2005). "Ronan point apartment tower collapse and its effect on building codes", Journal of Performance of Constructed Facilities, 19(4), 172-177.
Rahai, A., Asghshahr, M.S., Banazedeh, M. and Kazem, H. (2013). "Progressive collapse assessment of RC structures under instantaneous and gradual removal of columns", Advances in Structural Engineering, 16(10), 1671-1682.
Ren, P., Li, Y., Guan, H. and Lu, X. (2014). "Progressive collapse resistance of two typical high-rise RC frame shear wall structures", Journal of Performance of Constructed Facilities, 29(3), 04014087.
Rezvani, F.H., Yousefi, A.M. and Ronagh, H.R. (2015). "Effect of span length on progressive collapse behaviour of steel moment resisting frames", Structures, 3, 81-89.
Sasani, M. and Sagiroglu, S. (2008). "Progressive collapse of reinforced concrete structures: a multihazard perspective", ACI Structural Journal, 105(1), 96.
Shan, S., Li, S., Xu, S. and Xie, L. (2016). "Experimental study on the progressive collapse performance of RC frames with infill walls", Engineering Structures, 111, 80-92.
Tavakoli, H. and Kiakojouri, F. (2015). "Threat-independent column removal and fire-induced progressive collapse: numerical study and comparison", Civil Engineering Infrastructures Journal, 48(1), 121-131.
Yi, W.J., He, Q. F., Xiao, Y. and Kunnath, S.K. (2008) "Experimental study on progressive collapse-resistant behavior of reinforced concrete frame structures", ACI Structural Journal, 105(4), 433.
Zahrai, S.M. and Ezoddin, A. (2014). "Numerical study of progressive collapse in intermediate moment resisting reinforced concrete frame due to column removal", Civil Engineering Infrastructures Journal, 47(1), 71-88. | ||
آمار تعداد مشاهده مقاله: 571 تعداد دریافت فایل اصل مقاله: 770 |