پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 158 |
| تعداد شماره‌ها | 6,225 |
| تعداد مقالات | 67,685 |
| تعداد مشاهده مقاله | 114,965,933 |
| تعداد دریافت فایل اصل مقاله | 89,639,690 |
Modified mathematical model for variable fill fluid coupling | ||
| Journal of Computational Applied Mechanics | ||
| مقاله 21، دوره 49، شماره 2، اسفند 2018، صفحه 408-414 اصل مقاله (681.29 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jcamech.2018.251741.238 | ||
| نویسندگان | ||
| Saeed Bahrami* 1؛ Ali Keymasi Khalaji2 | ||
| 1Department of Mechanical Engineering, Faculty of Mechatronic, Islamic Azad University, Karaj Branch, Karaj, Iran | ||
| 2Department of Mechanical Engineering, Faculty of Engineering, Kharazmi University, Tehran, Iran | ||
| چکیده | ||
| Variable fill fluid couplings are used in the speed control units. Also, variation in coupling oil volume is used in adapting one size of coupling to a wider range of power transmission applications. Available model for the partially filled fluid couplings, has a good performance for couplings with fixed amount of oil but their performance will be degraded if they are used for the variable fill couplings. In this paper, the current model for partially filled fluid couplings is modified to have better performance for variable fill couplings. For this purpose, the circulation loss calculation is modified and also, the effect of oil temperature variations and blade thickness are included in the model. The effect of these modification on the model performance are investigated in couple of simulations. Comparing the simulation results with the available experimental data shows that the suggested modifications can improve the model performance very well. | ||
| کلیدواژه‌ها | ||
| Fluid coupling؛ Mathematical Modeling؛ Power transmission؛ Variable fill coupling؛ Turbomachinery | ||
| مراجع | ||
|
[1] A. Bahreini, A. Sattari, Numerical and Economic Study of Performance of Centrifugal Pump as Turbine, Journal of Computational Applied Mechanics, Vol. 48, No. 2, pp. 151-160, 2017. [2] A. Javanbakht, h. ahmadi danesh ashtian, Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves, Journal of Computational Applied Mechanics, pp. -, 2018. [3] A. Riasi, F. Dianatipoor, Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive, Journal of Computational Applied Mechanics, Vol. 48, No. 2, pp. 199-206, 2017. [4] F. J. Wallace, A. Whitfield, R. Sivalingam, A theoretical model for the performance prediction of fully filled fluid couplings, International Journal of Mechanical Sciences, Vol. 20, No. 6, pp. 335-347, 1978/01/01/, 1978. [5] A. M. Maqableh, Mathematical Modelling of Partially Filled Fluid Coupling Behaviour, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, Vol. 5, pp. 2625-2631, 1/, 2011. [6] G. H. Rolfe, Research on the Hydraulic Coupling, Proceedings of the Institution of Mechanical Engineers, Vol. 183, No. 1, pp. 219-232, 1968. [7] A. Whitfield, R. Sivalingam, F. J. Wallace, The performance prediction of fluid coupling with the introduction of a baffle plate, International Journal of Mechanical Sciences, Vol. 20, No. 10, pp. 729-736, 1978/01/01/, 1978. [8] F. White, 2015, Fluid Mechanics, [9] P. Akbarzadeh, S. M. Hashemian, H. Raznahan, Numerical Simulation of Thermal and Hydrodynamic Behavior of Mixtures of Air and Oil in Hydraulic Coupling, Tabriz Mechanical Engineering, Vol. 46, No. 3, pp. 11-19, 2016. [10] O. V. Yaremenko, T. I. Kononenko, Fluid coupling for starting up heavy machinery heat regime calculations and ways to reduce thermal stresses, Khimicheskoe i Neftyanoe Mashinostroenie, Vol. 1, pp. 9-11, 1968. | ||
|
آمار تعداد مشاهده مقاله: 382 تعداد دریافت فایل اصل مقاله: 494 |
||