پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شماره‌ها | 6,532 |
| تعداد مقالات | 70,500 |
| تعداد مشاهده مقاله | 124,088,512 |
| تعداد دریافت فایل اصل مقاله | 97,191,429 |
Fluid Properties Effects on Sand Production using Discrete Element Method | ||
| Journal of Chemical and Petroleum Engineering | ||
| مقاله 6، دوره 52، شماره 2، اسفند 2018، صفحه 169-179 اصل مقاله (1.05 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jchpe.2018.258574.1234 | ||
| نویسندگان | ||
| Seyed Mostafa Seyed Atashi؛ Kamran Goshtasbi* ؛ Rouhollah Basirat | ||
| Faculty of Engineering, Tarbiat Modares University, Tehran, Iran | ||
| چکیده | ||
| Oil production may be accompanied by Sand Production (SP) in the weak sandstone reservoirs. Fluid flow is an important factor in transporting the separated grains and completing the SP mechanism. In this paper, the effect of fluid parameters, fluid flow, and fluid pressure on the SP is investigated by applying the Discrete Element Method (DEM). Parametric studies show that fluid velocity is reduced by increasing the fluid viscosity, leading to a drop in the SP. In the present study, for an accurate investigation and discovering the effects of viscosity and drag force, the boundary conditions were applied to retain the fluid velocity as a constant amount. The results showed that viscosity is directly related to SP. Moreover, we found that when the fluid velocity is high, there would be the possibility of catastrophic production in the reservoirs with a heavy oil fluid. The rock reservoir around the well will be loosened as soon as SP is initiated. The results also indicate that SP has a direct relation with fluid pressure, fluid velocity, and confining pressure. | ||
| کلیدواژه‌ها | ||
| DEM؛ Fluid Properties؛ Numerical Modeling؛ sand production | ||
| مراجع | ||
|
[1] Fjar, E., Holt, R. M., Raaen, A. M., Risnes, R. and Horsrud, P. (2008). Petroleum Related Rock Mechanics, 2nd. Ed. Elsevier, Burlington.
[2] Wang, J., Walters, D., Wan, R. G. and Settari, A. (2005, January). “Prediction of volumetric sand production and wellbore stability analysis of a well at different completion schemes.” In Alaska Rocks 2005, The 40th US Symposium on Rock Mechanics (USRMS). American Rock Mechanics Association.
[3] Ranjith, P. G., Perera, M. S. A., Perera, W. K. G., Choi, S. K. and Yasar, E. (2014). “Sand production during the extrusion of hydrocarbons from geological formations: A review.” Journal of Petroleum Science and Engineering, Vol. 124, pp. 72-82.
[4] Xue S, Yuan Y. (2007). “Sanding Process and Permeability Change.” Journal of Canadian Petroleum Technology, Vol. 46, No. 4, pp. 33-39.
[5] Fattahpour, V. Moosavi, M. and Mehranpour, M. (2012). “An experimental investigation on the effect of grain size on oil-well sand production.” Petroleum Science. Vol. 9, Nol. 3, pp. 343-353.
[6] Li, L. C., Yang, S. L. and Chen, H. (2013). “Water and Sand Control Technology Successfully Ap-plied in Jidong Oilfield: A Case Study.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 35, No. 24, pp. 2294-2301
[7] Ghassemi, A. and Pak, A. (2015). “Numerical simulation of sand production experiment using a coupled Lattice Boltzmann–Discrete Element Method.” Journal of Petroleum Science and Engineering, Vol. 135, No. 218-231.
[8] Kaffash, A. and Shadizadeh, S. R. (2015). “A New Method for Modeling the Rate of Sand Pro-duction.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 37, No. 19, pp. 2081-2091.
[9] Shirinabadi, R. Moarefvaand, P. Goshtasbi, K. and Ahangari, K. (2016). “The physical and numerical modeling of sand production and gravel pack in oil wells by designing and manufacturing the machine and presenting a relation estimating sand production rate.” Journal of Mining Science, Vol. 52, No. 2, pp. 300-312.
[10] Itasca consulting group, Inc. (2012). PFC3D (Particle Flow Code in 3 Dimensions) version 4 and 5 User Manual. | ||
|
آمار تعداد مشاهده مقاله: 599 تعداد دریافت فایل اصل مقاله: 562 |
||