Effect of Structural Height on the Location of Key Element in Progressive Collapse of RC Structures

Abdollahzadeh, G., Nemati, M. and Avazeh, M. (2016). “Probability assessment and risk management of progressive collapse in strategic buildings facing blast loads”, Civil Engineering Infrastructures Journal, 49(2), 327-338.

Al-Salloum, Y.A., Abbas, H., Almusallam, T.H., Ngo, T. and Mendis, P. (2017). "Progressive collapse analysis of a typical RC high-rise tower", Journal of King Saud University, Engineering Sciences, 29(4), 313-320.

 American Society of Civil Engineers (ASCE), (2010). “Minimum design loads for buildings and other structures”, SEI/ASCE 7-10, Reston, Va.

American Society of Civil Engineers (ASCE), (2014). “Seismic rehabilitation of existing buildings”, ASCE/SEI 41-13, Reston, Virginia, USA.

American Society of Civil Engineers (ASCE). (2006). Seismic rehabilitation of existing buildings, ISBN 970-0-7844-0884-1, Reston, Virginia, USA.

Amiri, S., Saffari, H. and Mashhadi, J. (2017). “Assessment of dynamic increase factor for progressive collapse analysis of RC structures”, Engineering Failure Analysis, 84, 300-310.

Choi, J.H. and Chang, D.K. (2009). “Prevention of progressive collapse for building structures to member disappearance by accidental actions”, Journal of Loss Prevention in the Process Industries, 22(6), 1016-1019.

Choi, H., and J. Kim. (2011). “Progressive collapse-resisting capacity of RC beam-column sub-assemblage”, Magazine of Concrete Researches, 63(4), 297-310.

Department of Defense (DoD). (2005). “Design of structures to resist progressive collapse”, UFC 4-023-03, Washington DC, United States.

Department of Defense (DoD). (2009). “Design of structures to resist progressive collapse”, UFC 4-023-03, Washington DC, United States.

Department of Defense (DoD). (2010). “Design of Structures to Resist Progressive Collapse”, UFC 4-023-03, 2009, Including Change 1, 27 January 2010, Washington DC, United States.

Department of Defense (DoD). (2013). “Design of structures to resist progressive collapse”, UFC 4-023-03, 2009, Including Change 2, 1 June 2013, Washington DC, United States.

Ettouney, M., Smilowitz, R., Tang, M. and Hapij, A. (2006). “Global system considerations for progressive collapse with extensions to other natural and man-made hazards”, Journal of Performance of Constructed Facilities, 20(4), 403-417.

Fu, F. (2009). “Progressive collapse analysis of high-rise building with 3-D Finite Element modeling method”, Journal of Constructional Steel Research, 65, 1269-1278.

Fu, F. (2010). “3-D nonlinear dynamic progressive collapse analysis of multi-storey steel composite frame buildings, Parametric study”, Engineering Structures, 32, 3974-3980.

Frangopol, D.M. and Curley, J.P. (1987). “Effects of damage and redundancy on structural reliability”, Journal of Structural Engineering, ASCE, 113(7), 1533-1549.

Griffiths, H., Pugsley, A. and Saunders, O. (1968). “Collapse of flats at ronan point, canning town”, Her Majesty’s Stationery Office, London.

Hadianfard, M.A., Farahani, A. and B-Jahromi, A. (2012). “On the effect of steel columns cross sectional properties on the behaviours when subjected to blast loading”, Structural Engineering and Mechanics, 44(4), 449-463.

Iranian Road, Housing and Urban Development Research Center (BHRC). (2013a). Building design codes for earthquakes, Standard 2800, 4^th Edition, Tehran, I.R. Iran.

Iranian Road, Housing and Urban Development Research Center (BHRC). (2013b). “Iranian national building code No. 6: Loading”, INBC 6, Tehran, I.R. Iran.

Iranian Road, Housing and Urban Development Research Center (BHRC). (2013c). “Iranian national building code No. 9: Reinforced concrete structure design”, INBC 9, Tehran, I.R. Iran.

Izzuddin, B.A., Vlassis, A.G., Elghazouli, A.Y. and Nethercot, D.A. (2008). “Progressive collapse of multi-storey buildings due to sudden column loss-part i: Simplified assessment framework”, Engineering Structures, 30(5), 1308-1318.

Khandelwal, K., El-Tawil, Sh. and Sadek, F. (2009). “Progressive collapse analysis of seismically designed steel braced frames”, Journal of Constructional Steel Research, 65(3), 699-708.

Kheyroddin, A. and Mehrabi, F. (2012). “Assessment of progressive collapse potential of steel frame due to sudden corner column loss”, Wulfenia Journal, 19(10), 392-408.

Kheyroddin, A., Gerami, M. and Mehrabi, F. (2012). “Assessment of the dynamic effect of steel frame due to sudden middle column loss”, The Structural Design of Tall and Special Buildings, 23(5), 390-402.

Kim, J., Park J.H. and Lee. T.H. (2011). “Sensitivity analysis of steel buildings subjected to column loss”, Journal of Engineering Structures, 33, 421-432.

Krauthammer, T. and Cipolla, J. (2007), “Building blast simulation and progressive collapse analysis”, NAFEMS World Congress, Quebec City, Canada.

Krauthammer, T. (2008). Modern protective structures, CRC Press, Taylor and Francis Group.

Leyendecker, E.V. and Burnett, E.F.P. (1976). “The incidence of abnormal loading in residential buildings”, National Bureau of Standards, December.

Leyendecker, E.V., Breen, J.E., Somes, N.F. and Swatta, M. (1975). “Abnormal loading on buildings and progressive collapse: an annotated bibliography”, National Bureau of Standards, May.

Li, L., Wang, W., Chen, Y. and Teh, L.H. (2017). “A basis for comparing progressive collapse resistance of moment frames and connections”, Journal of Constructional Steel Research, 139, 1-5.

Mashhadiali N. and Kheyroddin, A. (2013). “Progressive collapse assessment of new hexagrid structural system for tall buildings”, The Structural Design of Tall and Special Buildings, 23(12), 947-961.

Mashhadiali, N., Gholhaki, M., Kheyroddin, A., Zahiri-Hashemi, R., (2016), “Technical note: analytical evaluation of the vulnerability of framed tall buildings with steel plate shear wall to progressive collapse”, International Journal of Civil Engineering, 14(8), 595-608.

Mashhadiali, N., Kheyroddin, A. and Zahiri-Hashemi, R. (2016). “Dynamic increase factor for investigation of progressive collapse potential in tall tube-type buildings”, Journal of Performance of Constructed Facilities, 30(6), 04016050.

McConnella, J.R. and Brown, H. (2011). “Evaluation of progressive collapse alternate load path analyses in designing for blast resistance of steel columns”, Engineering Structures, 33, 2899-2909.

Sadek, F., Main, J.A., Lew, H.S. and Bao, Y. (2011). “Testing and analysis of steel and concrete beam-column assemblies under a column removal scenario”, Journal of Structural Engineering, 137(9), 881-892.

Saltelli, A., Ratto, M., Andres, T., Campolongo, F., Cariboni, J., Gatelli, D., Saisana, M. and Tarantola, S. (2008). Global sensitivity analysis, The Primer, John Wiley and Sons.

Santafe, I.B., Berke, P., Bouillard, P., Vantomme, J. and Massart, T.J. (2011). “Investigation of the influence of design and material parameters in the progressive collapse analysis of RC structures”, Engineering Structures, 33, 2805-2820.

SAP2000. (2012). Computer software, Computers and Structures, Berkeley, CA.

Takumi, I. and Toshinobu, T. (2014). “Sensitivity analysis related to redundancy of regular and irregular framed structures after member disappearance”, International Journal of High-Rise Buildings, 3(4), 297-304.

Tavakoli, H.R. and Kiakojouri, F. (2014). “Progressive collapse of framed structures: suggestions for robustness assessment”, Scientia Iranica, Transaction A, Civil Engineering, 21(2), 329.

Tavakoli, H. and Kiakojouri, F. (2015). “Threat-independent column removal and fire-induced progressive collapse: Numerical study and comparison”, Civil Engineering Infrastructures Journal, 48(1), 121-131

Tavakoli, H.R. and Rashidi Alashti, A. (2013). “Evaluation of progressive collapse potential of multi-story moment resisting steel frame buildings under lateral loading”, Scientia Iranica, 20(1), 77-86.

The U.S. General Service Administrations (GSA). (2003). “Progressive collapse analysis and design guidelines for new federal office buildings and major modernization project”, Washington DC.

Vlassis, A.G., Izzuddin, B.A., Elghazouli, A.Y. and Nethercot, D.A. (2008). “Progressive collapse of multi-storey buildings due to sudden column loss, Part II: Application”, Engineering Structures, 30(5), 1424-1438.

Wada, A. and Wang, Zh. (1989). “A study on strength deterioration of indeterminate double-layer space truss due to accidental member failure”, Journal of Structural and Constructional Engineering, Transactions of AIJ, 402, 89-99. 

Zahrai, S.M. and Ezoddin, A. (2014). “Numerical study of progressive collapse in intermediate moment resisting reinforced concrete frame due to column removal”, Civil Engineering Infrastructures Journal, 47(1), 71-88.