Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure

[1]   M. Z. Nejad, A. Hadi, A. Rastgoo, Buckling analysis of arbitrary two-directional functionally graded Euler–Bernoulli nano-beams based on nonlocal elasticity theory, International Journal of Engineering Science, Vol. 103, pp. 1-10, 2016.

[2]   M. Z. Nejad, A. Hadi, Non-local analysis of free vibration of bi-directional functionally graded Euler–Bernoulli nano-beams, International Journal of Engineering Science, Vol. 105, pp. 1-11, 2016/08/01/, 2016.

[3]   M. Z. Nejad, A. Hadi, Eringen's non-local elasticity theory for bending analysis of bi-directional functionally graded Euler–Bernoulli nano-beams, International Journal of Engineering Science, Vol. 106, pp. 1-9, 2016/09/01/, 2016.

[4]   A. Hadi, M. Z. Nejad, M. Hosseini, Vibrations of three-dimensionally graded nanobeams, International Journal of Engineering Science, Vol. 128, pp. 12-23, 2018.

[5]   M. Z. Nejad, A. Hadi, A. Farajpour, Consistent couple-stress theory for free vibration analysis of Euler-Bernoulli nano-beams made of arbitrary bi-directional functionally graded materials, Structural Engineering and Mechanics, Vol. 63, No. 2, pp. 161-169, 2017.

[6]   M. Farajpour, A. Shahidi, A. Hadi, A. Farajpour, Influence of initial edge displacement on the nonlinear vibration, electrical and magnetic instabilities of magneto-electro-elastic nanofilms, Mechanics of Advanced Materials and Structures, Vol. 26, No. 17, pp. 1469-1481, 2019.

[7]   M. Hosseini, H. H. Gorgani, M. Shishesaz, A. Hadi, Size-dependent stress analysis of single-wall carbon nanotube based on strain gradient theory, International Journal of Applied Mechanics, Vol. 9, No. 06, pp. 1750087, 2017.

[8]   M. M. Adeli, A. Hadi, M. Hosseini, H. H. Gorgani, Torsional vibration of nano-cone based on nonlocal strain gradient elasticity theory, The European Physical Journal Plus, Vol. 132, No. 9, pp. 393, 2017.

[9]   M. Zamani Nejad, A. Rastgoo, A. Hadi, Effect of exponentially-varying properties on displacements and stresses in pressurized functionally graded thick spherical shells with using iterative technique, Journal of Solid Mechanics, Vol. 6, No. 4, pp. 366-377, 2014.

[10] M. Zamani Nejad, M. Jabbari, A. Hadi, A review of functionally graded thick cylindrical and conical shells, Journal of Computational Applied Mechanics, Vol. 48, No. 2, pp. 357-370, 2017.

[11] M. Z. Nejad, A. Hadi, A. Omidvari, A. Rastgoo, Bending analysis of bi-directional functionally graded Euler-Bernoulli nano-beams using integral form of Eringen's non-local elasticity theory, Structural Engineering and Mechanics, Vol. 67, No. 4, pp. 417-425, 2018.

[12] E. Zarezadeh, V. Hosseini, A. Hadi, Torsional vibration of functionally graded nano-rod under magnetic field supported by a generalized torsional foundation based on nonlocal elasticity theory, Mechanics Based Design of Structures and Machines, pp. 1-16, 2019.

[13] A. Soleimani, K. Dastani, A. Hadi, M. H. Naei, Effect of out-of-plane defects on the postbuckling behavior of graphene sheets based on nonlocal elasticity theory, Steel and Composite Structures, Vol. 30, No. 6, pp. 517-534, 2019.

[14] M. Hosseini, M. Shishesaz, A. Hadi, Thermoelastic analysis of rotating functionally graded micro/nanodisks of variable thickness, Thin-Walled Structures, Vol. 134, pp. 508-523, 2019.

[15] A. Hadi, A. Rastgoo, N. Haghighipour, A. Bolhassani, Numerical modelling of a spheroid living cell membrane under hydrostatic pressure, Journal of Statistical Mechanics: Theory and Experiment, Vol. 2018, No. 8, pp. 083501, 2018.

[16] M. Z. Nejad, N. Alamzadeh, A. Hadi, Thermoelastoplastic analysis of FGM rotating thick cylindrical pressure vessels in linear elastic-fully plastic condition, Composites Part B: Engineering, Vol. 154, pp. 410-422, 2018.

[17] M. Z. Nejad, A. Rastgoo, A. Hadi, Exact elasto-plastic analysis of rotating disks made of functionally graded materials, International Journal of Engineering Science, Vol. 85, pp. 47-57, 2014.

[18] M. Hosseini, M. Shishesaz, K. N. Tahan, A. Hadi, Stress analysis of rotating nano-disks of variable thickness made of functionally graded materials, International Journal of Engineering Science, Vol. 109, pp. 29-53, 2016.

[19] Z. Mazarei, M. Z. Nejad, A. Hadi, Thermo-elasto-plastic analysis of thick-walled spherical pressure vessels made of functionally graded materials, International Journal of Applied Mechanics, Vol. 8, No. 04, pp. 1650054, 2016.

[20] G. Galletly, J. Błachut, Torispherical shells under internal pressure—failure due to asymmetric plastic buckling or axisymmetric yielding, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 199, No. 3, pp. 225-238, 1985.

[21] J. Błachut, P. Wang, Buckling of Barreled Shells Subjected to External Hydrostatic Pressure, Journal of Pressure Vessel Technology, Vol. 123, No. 2, pp. 232-239, 2000.

[22] P. Jasion, K. Magnucki, Elastic buckling of barrelled shell under external pressure, Thin-Walled Structures, Vol. 45, No. 4, pp. 393-399, 2007/04/01/, 2007.

[23] P. Jasion, K. Magnucki, Elastic buckling of clothoidal–spherical shells under external pressure – theoretical study, Thin-Walled Structures, Vol. 86, pp. 18-23, 2015/01/01/, 2015.

[24] H. Wang, S. Ding, L. Li, Z. Sang, B. W. Krakauer, Buckling of thin-walled torispherical heads in water heater tanks, Thin-Walled Structures, Vol. 85, pp. 156-164, 2014/12/01/, 2014.

[25] G. Portela, L. A. Godoy, Wind pressures and buckling of cylindrical steel tanks with a dome roof, Journal of Constructional Steel Research, Vol. 61, No. 6, pp. 808-824, 2005/06/01/, 2005.

[26] J. Błachut, Buckling of sharp knuckle torispheres under external pressure, Thin-Walled Structures, Vol. 30, No. 1, pp. 55-77, 1998/01/01/, 1998.

[27] J. Błachut, V. Vu, Burst pressures for torispheres and shallow spherical caps, Strain, Vol. 43, No. 1, pp. 26-36, 2007.

[28] G. Galletly, S. Radhamohan, Elastic-plastic buckling of internally pressurized thin torispherical shells, Journal of Pressure Vessel Technology, Vol. 101, No. 3, pp. 216-225, 1979.

[29] A. Evkin, M. Kolesnikov, D. A. Prikazchikov, Buckling of a spherical shell under external pressure and inward concentrated load: asymptotic solution, Mathematics and Mechanics of Solids, Vol. 22, No. 6, pp. 1425-1437, 2017.

[30] K. Athiannan, R. Palaninathan, Experimental investigations on buckling of cylindrical shells under axial compression and transverse shear, Sadhana, Vol. 29, No. 1, pp. 93, February 01, 2004.

[31] D. Bennur, A. Anand, T. Jeevan, Stress Analysis of 2D-Cylindrical Pressure Vessel with Torispherical Endclosure,  0148-7191, SAE Technical Paper,  pp. 2014.

[32] J. W. Hutchinson, J. M. T. Thompson, Nonlinear buckling behaviour of spherical shells: barriers and symmetry-breaking dimples, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol. 375, No. 2093, pp. 20160154, 2017.

[33] K. Magnucki, P. Jasion, Analytical description of pre-buckling and buckling states of barrelled shells under radial pressure, Ocean Engineering, Vol. 58, pp. 217-223, 2013/01/15/, 2013.

[34] J. Błachut, Buckling of externally pressurised barrelled shells: a comparison of experiment and theory, International Journal of Pressure Vessels and Piping, Vol. 79, No. 7, pp. 507-517, 2002/07/01/, 2002.

[35] T. Niezgodzinski, J. Swiniarski, Numerical calculations of stability of spherical shells, Mechanics and Mechanical Engineering, Vol. 14, No. 2, pp. 325-337, 2010.

[36] J. Adachi, M. Benicek, Buckling of torispherical shells under internal pressure, Experimental Mechanics, Vol. 4, No. 8, pp. 217-222, August 01, 1964.

[37] R. W. Aylward, G. D. Galletly, Elastic buckling of, and first yielding in, thin torispherical shells subjected to internal pressure, International Journal of Pressure Vessels and Piping, Vol. 7, No. 5, pp. 321-336, 1979/09/01/, 1979.

[38] M. E. Golmakani, M. N. Sadraee Far, M. Moravej, Dynamic relaxation method for nonlinear buckling analysis of moderately thick FG cylindrical panels with various boundary conditions, Journal of Mechanical Science and Technology, Vol. 30, No. 12, pp. 5565-5575, December 01, 2016.

[39] M. F. Yang, C. C. Liang, C. H. Chen, A rational shape design of externally pressurized torispherical dome ends under buckling constraints, Computers & Structures, Vol. 43, No. 5, pp. 839-851, 1992/06/03/, 1992.

[40] F. Mehralian, Y. T. Beni, Thermo-electro-mechanical buckling analysis of cylindrical nanoshell on the basis of modified couple stress theory, Journal of Mechanical Science and Technology, Vol. 31, No. 4, pp. 1773-1787, April 01, 2017.

[41] A. Tafreshi, Numerical analysis of thin torispherical end closures, International Journal of Pressure Vessels and Piping, Vol. 71, No. 1, pp. 77-88, 1997/04/01/, 1997.

[42] G. Thurston, Asymmetrical buckling of spherical caps under uniform pressure, AIAA Journal, Vol. 2, No. 10, pp. 1832-1833, 1964.

[43] J. Bocko, P. Lengvarský, Buckling of single-walled carbon nanotubes with and without defects, Journal of Mechanical Science and Technology, Vol. 31, No. 4, pp. 1825-1833, April 01, 2017.

[44] J. R. Fitch, The buckling and post-buckling behavior of spherical caps under concentrated load, International Journal of Solids and Structures, Vol. 4, No. 4, pp. 421-446, 1968/04/01/, 1968.

[45] M. Killpack, F. Abed-Meraim, Limit-point buckling analyses using solid, shell and solid-shell elements, Journal of Mechanical Science and Technology, Vol. 25, No. 5, pp. 1105, August 08, 2011.

[46] M. Ganapathi, T. K. Varadan, Dynamic buckling of orthotropic shallow spherical shells, Computers & Structures, Vol. 15, No. 5, pp. 517-520, 1982/01/01/, 1982.

[47] Y. Fu, Some asymptotic results concerning the buckling of a spherical shell of arbitrary thickness, International Journal of Non-Linear Mechanics, Vol. 33, No. 6, pp. 1111-1122, 1998/11/15/, 1998.

[48] J. Yin, Z. Cao, C. Li, I. Sheinman, X. Chen, Stress-driven buckling patterns in spheroidal core/shell structures, Proceedings of the National Academy of Sciences, Vol. 105, No. 49, pp. 19132-19135, 2008.

[49] R. Ball, J. Burt, Dynamic buckling of shallow spherical shells, Journal of Applied Mechanics, Vol. 40, No. 2, pp. 411-416, 1973.

[50] R. D. Firouz-Abadi, M. M. Fotouhi, M. R. Permoon, H. Haddadpour, Natural frequencies and buckling of pressurized nanotubes using shear deformable nonlocal shell model, Journal of Mechanical Science and Technology, Vol. 26, No. 2, pp. 563-573, February 01, 2012.

[51] M. Mohammadi, M. Hosseini, M. Shishesaz, A. Hadi, A. Rastgoo, Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads, European Journal of Mechanics-A/Solids, 2019.