پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,532 |
| تعداد مقالات | 70,501 |
| تعداد مشاهده مقاله | 124,099,100 |
| تعداد دریافت فایل اصل مقاله | 97,206,671 |
Constrained Vertex Optimization and Simulation of the Unconfined Compressive Strength of Geotextile Reinforced Soil for Flexible Foundation Construction | ||
| International Journal of Mining and Geo-Engineering | ||
| مقاله 5، دوره 56، شماره 2، شهریور 2022، صفحه 125-138 اصل مقاله (1.02 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/ijmge.2021.321666.594906 | ||
| نویسندگان | ||
| Daniel E Aju1؛ Kennedy Chibuzor Onyelowe* 2 | ||
| 1Department of Civil Engineering, Michael Okpara University of Agriculture, Nigeria | ||
| 2Department of Civil Engineering, College of Engineering and Engineering Technology, Michael Okpara University of Agriculture, Umudike, Umuahia, Nigeria | ||
| چکیده | ||
| Extreme vertex design (EVD) provides an efficient approach to mixture experiment design whereby the factor level possesses multiple dependencies expressed through component constraints formulation. Consequently, the derived experimental points are within the center edges and vertices of the feasible constrained region. EVD was deployed for the modeling of the mechanical properties of the problematic clayey soil-geogrid blends. Geogrids are geosynthetic materials that possess an open mesh-like structure and are mostly used for soil stabilization. The geotextile materials present a geosynthetic and permeable layer to support the soil and foundation by improvement of its stiffness characteristics and at a cheaper cost to procure compared to other construction materials and possess unique lightweight properties with greater strength improvement on the soil layer when used. Minitab 18 and Design Expert statistical software was utilized for the mixture design experiment computation; to fully explore the constrained region of the simplex, I-optimal designs with a special cubic design model were utilized to formulate the mixture component ratios at ten experimental runs. I-optimality and D-optimality of 0.39093 and 1747.474, respectively, were obtained with a G-efficiency of 64.8%. The generated laboratory responses were taken together with the mixture ingredients’ ratio and taken as the system database for the model development. Statistical influence and diagnostics tests carried out on the generated EVD model indicate a good correlation with the experimental results. Graphical and numerical optimizations were incorporated using a desirability function that ranged from 0 to 1, which helped to arrive at the optimal combination of the mixture components. 0.2% of geogrid, 9.8% of water, and 90 % of soil yielded the optimal solution with a response of 41.270kN/m2 and a desirability score of 1.0. The model simulation was further carried out to test the model’s applicability with the results compared with the actual results using student’s t-test and analysis of variance. The statistical results showed a p-value>0.05 which indicates a good correlation. | ||
| کلیدواژهها | ||
| Geogrid؛ Unconfined compressive strength؛ Constrained simplex method؛ Design Expert؛ Soil reinforcement | ||
| مراجع | ||
|
[1] Salahudeen, A. B., Eberemu O. A., and Osinubi, K. J., Assessment of cement kiln dust-treated expansive soil for the construction of flexible pavements. Geotechnical and Geological Engineering, Springer, Vol. 32, 2014, No. 4, PP. 923-931.
[2] I. Al-Qadi, S. Dessouky, J. Kwon, and E. Tutumluer,”Geogrid in flexible pavements: validated mechanism,” Transportation Research Record: Journal of the Transportation Research Board, no. 2045, pp. 102-109, 2008.
[3] Buonsanti, M.; Leonardi, G.; Scopelliti, F. Theoretical and computational analysis of airport flexible pavements reinforced with geogrids. In 7th RILEM International Conference on Cracking in Pavements; Springer: Dordrecht, the Netherlands; Berlin/Heidelberg, Germany, 2012; pp. 1219–1227.
[4] A. Demir, M. Laman, A. Yildiz, and M. Ornek, “Large scale field tests on geogrid-reinforced granular fill underlain by clay soil,” Geotextiles and Geomembranes, vol. 42, pp. 1–15, 2012
[5] B. Indraratna, N. T. Ngo, and C. Rujikiatkamjorn, “Behavior of geogrid-reinforced ballast under various levels of fouling,” Geotextiles and Geomembranes, vol. 29, no. 3, pp. 313–322, 2011
[6] H. A. Alawaji, “Settlement and bearing capacity of geogrid reinforced sand over collapsible soil,” Geotextiles and Geomembranes, vol. 19, no. 2, pp. 75–88, 2001.
[7] Mehrjardi GT, Ghanbari A and Mehdizadeh H. Experimental study on the behaviour of geogrid-reinforced slopes with respect to aggregate size. Geotextiles Geomembranes 2016; 44(6): 862–871.
[8] Bao CG, Wang MY and Ding JH. Mechanism of soil reinforced with geogrid. Journal of Yangtze River Scientific Research Institute 2013; 30(1): 34–41.
[9] Jia-Quan Wang, Liang-Jie Xu, Zhi-Nan Lin, Yi Tang. (2020). Study on creep characteristics of geogrids considered sand-geosynthetics interaction under different loading levels. Journal of Engineered Fibers and Fabrics Volume 15: 1–12. DOI: 10.1177/1558925020958520.
[10] K. Onyelowe, G. Alaneme, D. Bui Van, M. Nguyen Van, C. Ezugwu, T. Amhadi, F. Sosa, F. Orji, and B. Ugorji, Generalized Review on EVD and Constraints Simplex Method of Materials Properties Optimization for Civil Engineering, Civil Engineering Journal (5) (2019) 729-749, http://dx.doi.org/10.28991/cej-2019-03091283
[11] K.C. Onyelowe, G. Alaneme, C. Igboayaka, F. Orji, H. Ugwuanyi, D. Bui Van, M. Nguyen Van, Scheffe optimization of swelling California bearing ratio, compressive strength, and durability potentials of quarry dust stabilized soft clay soil, Mater. Sci. Energy Technol. 2 (1) (2019) 67 77. https://doi.org/ 10.1016/j.mset.2018.10.005.
[12] Liu, Y., Su, Y., Namdar, A., et al., Utilization of cementitious materials from residual rice husk ash and lime in stabilization of expansive soil. Advances in Civil Engineering, Vol. 2019, and article ID: 5205276. https://doi.org/1155/2019/5205276
[13] Irving Cruz-Matíasa, Dolors Ayalab, Daniel Hillerc, Sebastian Gutschd, Margit Zachariasd, Sònia Estradée, f, Francesca Peiróe, Sphericity and roundness computation for particles using the extreme vertices model, Journal of Computational Science 30 (2019) 28–40, https://doi.org/10.1016/j.jocs.2018.11.005 1877-7503
[14] Faula Arina, Aji Hamim Wigena, I Made Sumertajaya2, Utami Syafitri, Split Plot Mixture Process Variable Experiment on Steel Slag Concrete, IOP Conf. Series: Earth and Environmental Science 187 (2018) 012049, doi :10.1088/1755-1315/187/1/012049.
[15] R. A. McLean and V. L. Anderson (2012) “Extreme Vertices Design of Mixture” University of Tennessee, United States.
[16] Damiri S, Pouretedal HR, Bakhshi O. (2016). ‘An extreme vertices mixture design approach to the optimization of methylal production process using p-toluenesulfonic acid as catalyst’. Chem Eng Res Des 2016;112:155–62
[17] J. A. Cornell, Experiments with Mixtures: Designs, Models, and the Analysis of Mixture Data, John Wiley & Sons, New York, NY, USA, 3rd edition, 2011.
[18] J. A. Cornell, Experiments with Mixtures: Designs, Models, and the Analysis of Mixture Data, John Wiley & Sons, New York, NY, USA, 3rd edition, 2011.
[19] H. Scheffé, Experiments with mixtures. Journal of the Royal Statistical Society Series B. 20, (1958), 344-360.
[20] D. Jian-Tong, Y. Pei-Yu, L. Shu-Lin, Z. Jin-Quan, Extreme vertices design of concrete with combined mineral admixtures. Cement and Concrete Research, 29(6) (1999) 957-960. http://dx.doi.org/10.1016/S0008-8846(99)00069-1
[21] Calvarano, L.S.; Palamara, R.; Leonardi, G.; Moraci, N. Unpaved Road Reinforced with Geosynthetics. Procedia Eng. 2016, 158, 296–301.
[22] British Standard (BS) 1377 (1990) Method of testing soils for civil engineering purpose. British Standards Institution, London
[23] British Standard (BS) 1924 (1990) Method of testing for stabilized soils. British Standard Institution, London
[24] Aslam, F., Farooq, F., Amin, M. N., et al., Application of gene expression programming for estimating compressive strength of high-strength concrete. Advances in Civil Engineering, Vol. 2020, article ID: 8850535. https://doi.org/10.1155/2020/8850535
[25] W. Wangkananon, C. Phuaksaman, T. Koobkokkruad, S. Natakankitkul, An extreme vertices mixture design approach to optimization of tyrosinase inhibition effects. Engineering Journal, 22 (1) (2018) http://dx.doi.org/10.4186/ej.2018.22.1.175
[26] Aji Hamim Wigena, I Made Sumertajaya and Utami Syafitri, Constrained Experimental Regions on Ground Granulated Blast Furnace Slag Concrete, Applied Mathematical Sciences, Vol. 12, 2018, no. 26, 1251 1258. https://doi.org/10.12988/ams.2018.89128
[27] Guimarães MGA, de Mattos VD, de Carvalho U, et al. Degradation of polypropylene woven geotextile: tensile creep and weathering. Geosynth Int 2017; 24(2): 213–223
[28] Wang JQ, Zhou J and Deng YB. Macro-Mesoscopic study of the interface between sand and geogrid[C]//Geotechnical Special Publication No.207, In: GeoShanghai international conference, Shanghai, China, 3–5 June 2010, pp. 361–366.
[29] Design expert 11. Design of experiment software, Stat-Ease Inc., Minneapolis, USA. 2018.
[30] Minitab 18. Minitab statistical software, Minitab Inc., Pennsylvania, USA. 2018.
[31] Kwok CCHCM. Parametric studies of the behaviour of a reinforced embankment. Geotextiles, Geomembranes, and Related Products: steep slopes and walls. Embankments on soft soil. Roads and railroads. Filtration and drainage. Erosion control 1990; 1: 137.
[32] Pinho-Lopes M, Paula AM and Lopes ML. Long-term response and design of two geosynthetics: effect of field installation damage. Geosynth Int 2018; 25(1): 98–117
[33] Zhou J, Chen JF, Xue JF, et al. Micro-mechanism of the interaction between sand and geogrid transverse ribs. Geosynth Int 2012; 19(6): 426–437.
[34] J. Schwartz, S. Merck, R. L. Dohme, Optimization techniques in product formulation. J Soc Cosmet Chem., 32 (1981) 287-301.
[35] Lawson J, Erjavec J (2001). Modern Statistics for Engineering and Quality Improvement.Duxbury, Pacific Grove.
[36] U. Syafitri, B. Sartono, P. Goos, I-optimal design of mixture experiments in the presence of ingredient availability constraints. J. Qual. Technol. 47 (2015) 220–234.
[37] Ding JT, Yan PY, Liu SL, Zhu JQ. (1999). ‘Extreme vertices design of concrete with combined mineral admixtures’. Cem Concr Res 1999; 29(6):957–60, http://dx.doi.org/10.1016/S0008-8846(99)00069-1.
[38] Xue JF, Chen JF, Liu JX, et al. Instability of a geogrid reinforced soil wall on thick soft Shanghai clay with prefabricated vertical drains: a case study. Geotextiles Geomembranes 2014; 42(4): 302–311
[39] Alaneme, G. U., Onyelowe, K. C., Onyia, M. E., Bui Van, D., Mbadike, E. M., Dimonyeka, M. U., Attah, I. C., Ogbonna, C., Iro, U. I., Kumari S., Firoozi A. A., and Oyagbola I. (2020). Modelling Of The Swelling Potential Of Soil Treated With Quicklime-Activated Rice Husk Ash Using Fuzzy Logic, Umudike Journal of Engineering and Technology (UJET); Vol. 6, No. 1, June 2020, pp. 1 – 22; Michael Okpara University of Agriculture, Umudike, Print ISSN: 2536-7404, Electronic ISSN:2545-5257; http://ujetmouau.net; doi: https://doi.org/10.33922/j.ujet_v6i1_1
[40] Standard Specifications for Transportation, Material and Method of Sampling and Testing, 14th Edition, American Association of State Highway and Transportation Official (AASHTO) Washington D.C. 1986
[41] American Standard for Testing Material, Annual Book of Standards Vol. 04.08, American Society for Testing and Materials, Philadelphia. 1992.
[42] Federal Ministry of Works and Housing (1997) General Specification for Roads and Bridges, Volume II, Federal Highway Department, FMWH: Lagos, Nigeria, 317 p.
[43] Bello, A. A., Ige, J. A., and Tajudeen, S. 2007. Geotechnical characterization of lateritic Soils in parts of Ejigbo Local Area, South-western Nigeria. LAUTECH J. Engr. Technol. 4(2): 34 – 38.
[44] Kennedy Chibuzor Onyelowe, Duc Bui Van & Manh Nguyen Van (2018) “Swelling potential, shrinkage and durability of cemented and uncemented lateritic soils treated with CWC base geopolymer”, International Journal of Geotechnical Engineering
[45] G. A. Miller, M. Zaman, Field and laboratory evaluation of cement kiln dust as a soil stabilizer. Transp. Res. Rec., 1714 (2000) 25–32.
[46] A. B. Salahudeen, T. S. Ijimdiya, A. O. Eberemu, K. J. Osinubi, Artificial neural networks prediction of compaction characteristics of black cotton soil stabilized with cement kiln dust. J Soft Comput Civ Eng 2(3) (2018) 53–74.
[47] A. B. Salahudeen, O. A. Eberemu, K. J. Osinubi, Assessment of cement kiln dust-treated expansive soil for the construction of flexible pavements. Geotechnical and Geological Engineering, Springer, 32(4) (2014) 923-931.
[48] Alaneme George, U. & Mbadike Elvis, ‘Modelling of the mechanical properties of concrete with cement ratio partially replaced by aluminium waste and sawdust ash using artificial neural network’, M. SN Appl. Sci. (2019) 1: 1514. https://doi.org/10.1007/s42452-019-1504-2
[49] Provenzano P, Ferlisi S, Musso A. Interpretation of a model footing response through an adaptive neural fuzzy inference system. Comput Geotech 2004;31:251–66.
[50] D. W. Marquardt, R. D. Snee, Test statistics for mixture models, Technometrics, 14 (1974) 533-537.
[51] Stahle L, Wold S. Analysis of variance (ANOVA). ChemometrIntell Lab Syst 1989;6:259–72,http://dx.doi.org/10.1155/2018/9308580.
[52] R. D. Snee, Experiment design for mixture systems with multicomponent constraints. Commun. Stat. Theory Methods, 17 (1979) 149–159.
[53] Akhnazarova, S., &Kafarou, V. (1982). “Experiment optimization in Chemistry and chemical engineering”, MIR publishers, Moscon.
[54] A. C. Atkinson, A. N. Donev, R. D. Tobias, Optimal experimental design with SAS; Oxford University Press: Oxford, UK, 2007.
[55] McLean, R. A. and Anderson, V. L. (1966). ‘Extreme Vertices Design of Mixture Experiments. Technometrics’, 8(3) 447-454.
[56] Kumar RG, Sanghvi I. Optimization techniques: an overview for formulation development. Asian J Pharm Res 2015;5:217-21.
[57] R. Shobha, R. Hiremath, K. Vanaja, Optimization techniques in pharmaceutical formulation and processing. Textbook of Industrial Pharmacy. Drug Delivery Systems, Cosmetic and Herbal Drug Technology, (2016) 158-68.
[58] S. Bolton, Optimization techniques in pharmaceutical statistics. Practical and clinical Applications. 3rded. New York: Marcel Dekker; 1997.
[59] J. J. Borkowski, Using genetic algorithm to generate small exact response surface designs. J. Probab. Stat. Sci. 1 (2003) 65–88.
[60] Brereton R. G., Chemometrics: Data Analysis for the Laboratory and Chemical Plant, John Wiley & Sons, West Sussex, UK, 2003.
[61] W. F. Smith, Experimental design for formulation, The American Statistical Association and the Society for Industrial and Applied Mathematics: Philadelphia, PA, USA, 2005
[62] J. W. Gorman, Fitting equations to mixture data with restraints on compositions. J. Quality Tech., 2 (1970) 186-194.
[63] G. E. P. Box, N. R. Draper, A basis for the selection of a response surface design. J. Am. Stat. Assoc. 54 (1959) 622–654
[64] Piepel GF (1988). “Programs for Generating Extreme Vertices and Centroids of Linearly Constrained Experimental Regions.” Journal of Quality Technology, 20, 125–139.
[65] Fedorov, V.V. Theory of Optimal Experiments; Academic Press: New York, NY, USA, 1972.
[66] R. H. Hardin, N. J. A. Sloane, A new approach to construction of optimal designs. J. Stat. Plan. Inference 37 (1993) 339–369.
[67] Sahni NS, Piepel GF, Naes T (2009). “Product and Process improvement Using Mixture- Process Variable Methods and Robust Optimization Techniques.” Journal of Quality Technology, 41, 181–197.
[68] A. Ozol-Godfrey, C. M. Anderson-Cook, D. C. Montgomery, Fraction of design space plots for examining model robustness. J. Qual. Technol. 37 (2005) 223–235.
[69] Myers RH, Montgomery DC (2002). ‘Response Surface Methodology: Process and Product Optimization Using Designed Experiments’. 2nd edition. John Wiley & Sons, New York.
[70] Goos P, Donev AN (2007). “Tailor-Made Split-Plot Designs for Mixture and Process Variables.” Journal of Quality Technology, 39, 326–339.
[71] Bates D, Mächler M, Bolker B, Walker S (2015). “Fitting Linear Mixed-Effects Models Using lme4.” Journal of Statistical Software, 67(1), 1–48. doi:10.18637/jss.v067.i01.
[72] Alaneme, G.U., Ezeokpube, G.C. & Mbadike, E.M. Failure Analysis of a Partially Collapsed Building using Analytical Hierarchical Process. J Fail. Anal. And Preven. (2020). https://doi.org/10.1007/s11668-020-01040-3
[73] Coetzer, R.; Haines, L.M. The construction of D- and I-optimal designs for mixture experiments with linear constraints on the components. Chemom. Intell. Lab. Syst. 2017, 171, 11 | ||
|
آمار تعداد مشاهده مقاله: 311 تعداد دریافت فایل اصل مقاله: 322 |
||