پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شماره‌ها | 6,532 |
| تعداد مقالات | 70,502 |
| تعداد مشاهده مقاله | 124,119,175 |
| تعداد دریافت فایل اصل مقاله | 97,225,503 |
شبیهسازی رفتار تراکم خاک زراعی با روش اجزاء محدود و تکنیک پردازش تصویر | ||
| مهندسی بیوسیستم ایران | ||
| دوره 53، شماره 2، تیر 1401، صفحه 141-154 اصل مقاله (1.27 M) | ||
| نوع مقاله: مقاله پژوهشی | ||
| شناسه دیجیتال (DOI): 10.22059/ijbse.2022.332682.665447 | ||
| نویسندگان | ||
| مجتبی جابری معز* 1؛ دنیا اکبری2 | ||
| 1گروه مهندسی بیوسیستم، دانشکده کشاورزی، دانشگاه بوعلی سینا، همدان، ایران | ||
| 2فارغ التحصیل کارشناسی ارشد، گروه مهندسی بیوسیستم، دانشکده کشاورزی، دانشگاه بوعلی سینا، همدان، ایران | ||
| چکیده | ||
| چکیده: تراکم خاک به فرآیندی که سبب افزایش چگالی ظاهری، کاهش حجم و پیوستگی منافذ، کاهش نفوذپذیری آبی و هوایی خاک و افزایش مقاومت مکانیکی میگردد، اطلاق میشود. یکی از پارامترهای مهم ارزیابی تراکم خاک، تنش پیش-تراکمی میباشد که اغلب به عنوان تنش در آستانه تراکم خاک، محسوب میشود. آزمون نشست صفحهای روشی مناسب برای تعیین تنش پیش تراکمی خاک میباشد. در این تحقیق، آزمون تجربی نشست صفحهای، روی یک نمونه خاک زراعی (شنی رسی لومی) در سطح محتوای رطوبتی 15 درصد بر پایه خشک و چگالی 1500 کیلوگرم بر مترمکعب انجام شد و خواص مکانیکی خاک تعیین شدند. سپس آزمون نشست صفحهای به روش اجزاء محدود به‌صورت دو بعدی و متقارن در نرمافزار آباکوس شبیهسازی و تنش پیشتراکمی با این روش نیز پیشبینی شد. همچنین میزان تغییرات تنش و جابجایی در لایههای عرضی و عمقی خاک زراعی تجزیه و تحلیل شدند. بین دادههای استخراج شده از مدل شبیهسازی و دادههای تجربی تطابق بالایی بین آن‌ها وجود داشت (R2 =0.99). بررسی توزیع تنش فشاری و جابجایی در لایههای مختلف در عمق خاک نشان داد که مقدار تنش و جابجایی در لایههای نزدیک به سطح بارگذاری بیشتر و با پیشروی به سمت لایههای زیرین از مقدار تنش و جابجایی کاسته میشود. همچنین، در این پژوهش، از تکنیک پردازش تصویر نرمافزار متلب[1] به عنوان روشی برای تخمین میزان تراکم خاک استفاده شد. بهعنوان نتیجهگیری کلی، میتوان از هر دو روش اجزاء محدود و پردازش تصویر برای تشخیص ناحیه فشرده شده خاک استفاده نمود. [1] MATLAB | ||
| کلیدواژه‌ها | ||
| تنش پیشتراکمی؛ توزیع تنش؛ مدل دراکر-پراگر؛ نشست صفحهای | ||
| عنوان مقاله [English] | ||
| Simulation of Arable Soil Compaction Behavior by Finite Element Method and Image Processing Technique | ||
| نویسندگان [English] | ||
| mojtaba jaberimoeaz1؛ donya akbari2 | ||
| 1Department of Biosystems Engineering, Faculty of Agriculture, Bu-Ali Sina University, Hamedan, Iran. | ||
| 2Graduate Student, Department of Biosystems Engineering, Faculty of Agriculture, Bu-Ali Sina University, Hamedan, Iran | ||
| چکیده [English] | ||
| ABSTRACT: Soil compaction refers to process that increases density, decreases volume and continuity of pores, decreases water and air permeability, and increases mechanical strength. One of important parameters for evaluation of soil compaction is pre-compaction stress, which is often considered as stress at threshold of soil compaction. Plate sinkage test is an appropriate method for determining soil pre-compaction stress. In this research, for determining pre-compaction stress the experimental test of plate sinkage was used on a sample of arable soil (sandy clay loam) at the level of 15% moisture content based on dryness and density 1500 kg.m-3. Then mechanical properties of soil was determined. Plate sinkage test was simulated as the form of two-dimensional and symmetric in Abaqus software and the pre-compression stress was also predicted by this method. Also, the amount of stress and displacement changes in the transverse and longitudinal layers of arable soil were analyzed. There was a high correlation (R2 =0.99) between the data extracted from the simulation model and the experimental data. Examination of compressive stress and displacement in different layers in the soil depth showed that the amount of stress and displacement in layers close to load level is more and decreases amount of stress and displacement as it progresses to the lower layers. Also, in this research, image processing technique by MATLAB software has been applied as a method to estimate soil compaction. As a general conclusion, the finite element method and image processing can be used for assessment of compacted region of soil. | ||
| کلیدواژه‌ها [English] | ||
| pre-compression stress, Stress distribution, Drucker–Prager, plate sinkage | ||
| مراجع | ||
|
ABAQUS (2010). ABAQUS Theory Manuals Version 6.10.1. ABAQUS, Inc., Providence, RI. Alexandrou, A., & Earl, R. (1995). In situ determination of the pre-compaction stress of a soil. Journal of Agricultural Engineering Research, 61(1), 67-71. Alshibli, K. A., & Sture, S. (2000). Shear band formation in plane strain experiments of sand. Journal of Geotechnical and Geoenvironmental Engineering, 126(6), 495-503. ASTM Committee D-18 on Soil and Rock. (2005). Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. ASTM. Batey, T. (2009). Soil compaction and soil management–a review. Soil Use and Management, 25(4), 335-345. Bennett, J. M., Roberton, S. D., Jensen, T. A., Antille, D. L., & Hall, J. (2017). A comparative study of conventional and controlled traffic in irrigated cotton: I. Heavy machinery impact on the soil resource. Soil and Tillage Research, 168, 143-154. Bolton, M. D. (1986). The strength and dilatancy of sands. Geotechnique, 36(1), 65-78. Casagrande, A. (1936). The determination of pre-consolidation load and its practical significance. In: International Conference on Soil Mechanics and Foundation Engineering. 22-26 June, Cambridge, MA,Vol. 3, pp.60-64. Cueto, O.G., Coronel, C.E.I., Morfa, C.A.R., Sosa, G.U., Gómez, L.H.H., Calderón, G.U., & Suárez, M. H. (2013). Three dimensional finite element model of soil compaction caused by agricultural tire traffic. Computers and Electronics in Agriculture, 99, 146-152. DeJong-Hughes, J., Moncrief, J., Voorhees, W., Swan, J. (2001). Soil Compaction: Causes, Effects and Control. St. Paul, MN: University of Minnesota Extension Service FO-3115-S. Earl, R., & Alexandrou, A. (2001). Deformation processes below a plate sinkage test on sandy loam soil: experimental approach. Journal of Terramechanics, 38(3), 153-162. Farhadi, P., Mohsenimanesh, A., & Alimardani, R. (2013). Evaluation of soil-tire interaction on a soil bin. Agricultural Engineering International: CIGR Journal, 15(1), 37-42. Gonzalez, R. C., & Woods, R. E. (2008). Digital image processing: Pearson prentice hall. Upper Saddle River, NJ, 1, 376-376. Gregory, A.S., Whalley, W.R., Watts, C.W., Bird, N.R.A., Hallett, P.D., & Whitmore, A.P. (2006). Calculation of the compression index and precompression stress from soil compression test data. Soil and Tillage Research, 89(1), 45-57. Hamza, M.A., & Anderson, W.K. (2005). Soil compaction in cropping systems: A review of the nature, causes and possible solutions. Soil and Tillage research, 82(2), 121-145. Hemmat, A., Nankali, N., & Aghilinategh, N. (2012). Simulating stress–sinkage under a plate sinkage test using a viscoelastic 2D axisymmetric finite element soil model. Soil and Tillage Research, 118, 107-116. Jaberi, M., Jafari, A., Keyhani, A., & Shorafa, M. (2018). Effects of freezing and thawing process on soil compressibility. Agricultural Mechanization, 4(1), 45-55. (In Farsi) Jimenez, K.J., Rolim, M. M., Gomes, I.F., de Lima, R.P., Berrio, L.L.A., & Ortiz, P. F. (2021). Numerical analysis applied to the study of soil stress and compaction due to mechanised sugarcane harvest. Soil and Tillage Research, 206, 1-10. Keller, T. (2005). A model for the prediction of the contact area and the distribution of vertical stress below agricultural tyres from readily available tyre parameters. Biosystems Engineering, 92(1), 85-96. Keller, T., & Arvidsson, J. (2006). Prevention of traffic-induced subsoil compaction in Sweden: Experiences from wheeling experiments: (Vermeidung von Unterbodenverdichtungen durch Landwirtschaftsmaschinen in Schweden: Erfahrungen aus Befahrungsversuchen). Archives of Agronomy and Soil Science, 52(02), 207-222. Keller, T., Berli, M., Ruiz, S., Lamandé, M., Arvidsson, J., Schjønning, P., & Selvadurai, A. P. (2014). Transmission of vertical soil stress under agricultural tyres: Comparing measurements with simulations. Soil and Tillage Research, 140, 106-117. Komakpanah, A., & valinejad, N. (2006). Local strain measurement in soil specimen of triaxial test by digital image processing method. Modares Technical and Engineering, (23), 41-45. https://www.sid.ir/Journal/viewpaper. Aspx?id=63940 Lebert, M., & Horn, R. (1991). A method to predict the mechanical strength of agricultural soils. Soil and Tillage Research, 19(2-3), 275-286. Naderi-Boldaji, M., Hajian, A., Ghanbarian, D., & Bahrami, M. (2018). Finite element simulation of plate sinkage, confined and semi-confined compression tests: A comparison of the response to yield stress. Soil and Tillage Research, 179, 63-70. Naveed, M., Schjønning, P., Keller, T., de Jonge, L. W., Moldrup, P., & Lamandé, M. (2016). Quantifying vertical stress transmission and compaction-induced soil structure using sensor mat and X-ray computed tomography. Soil and Tillage Research, 158, 110-122. Peixoto, D. S., Silva, B. M., de Oliveira, G. C., Moreira, S. G., da Silva, F., & Curi, N. (2019). A soil compaction diagnosis method for occasional tillage recommendation under continuous no tillage system in Brazil. Soil and Tillage Research, 194, 1-12. Rashidi, M., & Gholami, M. (2010). Prediction of soil sinkage by multiple loadings using the finite element method. International Journal of Agriculture and Biology, 12, 911-915. Senatore, C. & Iagnemma, K. (2014). Analysis of stress distributions under lightweight wheeled vehicles. Journal of Terramechanics, 51, 1-17. Shahgholi, G., Chiyaneh, H. G., & Gundoshmian, T. M. (2018). Modeling of soil compaction beneath the tractor tire using multilayer perceptron neural networks. Journal of Agricultural Machinery, 8(1), 105-118. Sivarajan, S., Maharlooei, M., Bajwa, S. G., & Nowatzki, J. (2018). Impact of soil compaction due to wheel traffic on corn and soybean growth, development and yield. Soil and Tillage Research, 175, 234-243. Soane, B.D. & Van Ouwerkerk, C. (1994). Soil compaction problems in world agriculture. In Developments in Agricultural Engineering, 11, 1-21. Susila, E., & Hryciw, R. D. (2003). Large displacement FEM modelling of the cone penetration test (CPT) in normally consolidated sand. International Journal for Numerical and Analytical methods in geomechanics, 27(7), 585-602. Tekeste, M. Z., Tollner, E. W., Raper, R. L., Way, T. R., & Johnson, C. E. (2009). Non-linear finite element analysis of cone penetration in layered sandy loam soil–Considering precompression stress state. Journal of Terramechanics, 46(5), 229-239. Ucgul, M., & Saunders, C. (2020). Simulation of tillage forces and furrow profile during soil-mouldboard plough interaction using discrete element modelling. Biosystems Engineering, 190, 58-70. Ucgul, M., Saunders, C., & Fielke, J. M. (2018). Comparison of the discrete element and finite element methods to model the interaction of soil and tool cutting edge. Biosystems Engineering, 169, 199-208. Wallace, C. W., Flanagan, D. C., & Engel, B. A. (2017). Quantifying the effects of conservation practice implementation on predicted runoff and chemical losses under climate change. Agricultural Water Management, 186, 51-65. Youssef, A. F. A., & Ali, G. A. (1982). Determination of soil parameters using plate test. Journal of Terramechanics, 19(2), 129-147. Zhu, X. H., & Jia, Y. J. (2014). 3D Mechanical modeling of soil orthogonal cutting under a single reamer cutter based on Drucker–Prager criterion. Tunnelling and Underground Space Technology, 41, 255-262. | ||
|
آمار تعداد مشاهده مقاله: 288 تعداد دریافت فایل اصل مقاله: 234 |
||