پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,532 |
| تعداد مقالات | 70,501 |
| تعداد مشاهده مقاله | 124,115,373 |
| تعداد دریافت فایل اصل مقاله | 97,219,463 |
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads | ||
| Journal of Computational Applied Mechanics | ||
| دوره 54، شماره 1، خرداد 2023، صفحه 68-86 اصل مقاله (864.18 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jcamech.2023.352182.784 | ||
| نویسندگان | ||
| Mojtaba Khatoonabadi1؛ Mohammad Jafari1؛ Faraz Kiarasi2؛ Mohammad Hosseini3؛ Masoud Babaei4؛ Kamran Asemi* 4 | ||
| 1Faculty of Mechanical and Mechatronics Engineering, Shahrood University of Technology, Semnan, Iran. | ||
| 2Department of Mechanical Engineering, University of Eyvanekey, Eyvanekey, Semnan, Iran. | ||
| 3Department of Mechanical Engineering, University of Hormozgan, Bandar Abbas, Iran. | ||
| 4Mechanical Engineering Department, Islamic Azad University- Tehran North Branch, Tehran, Iran. | ||
| چکیده | ||
| In this article, shear buckling analysis of functionally graded porous annular sector plate reinforced with graphene nanoplatelets (GPLs) are investigated for the first time. The plate is consisting of a layered model with uniform or non-uniform dispersion of graphene platelets in a metallic matrix including open-cell interior pores. The extended rule of mixture and the modified Halpin-Tsai models and are employed to obtain the effective mechanical properties of the porous nanocomposite plate. Three different porosity distributions in conjunction with five patterns for dispersion of GPL nanofiller are considered through the thickness of plate. Governing equations derived according to the principle of minimum total potential energy based on 3D elasticity theory and generalized geometric stiffness concept. Finally, finite element method is applied for solving the governing equations of structure. The influence of different parameters including various porosity distribution, porosity coefficient, patterns of GPL dispersion, weight fraction of GPL nanofiller, boundary conditions and sector angles on shear buckling loads of the annular sector plate has been surveyed. | ||
| کلیدواژهها | ||
| Shear buckling,,؛ ,،3D elasticity theory,,؛ ,،Annular sector plate,,؛ ,،FEM,,؛ ,،FG porous material,,؛ ,،GPLs | ||
| مراجع | ||
|
[1] L. Hromadová, Thermal pressurization of pore fluid during earthquake slip, Comenius University, Bratislava, 2009.
[2] M. A. Biot, Theory of elasticity and consolidation for a porous anisotropic solid, Journal of applied physics, Vol. 26, No. 2, pp. 182-185, 1955.
[3] I. Gibson, M. F. Ashby, The mechanics of three-dimensional cellular materials, Proceedings of the royal society of London. A. Mathematical and physical sciences, Vol. 382, No. 1782, pp. 43-59, 1982.
[4] M. F. Ashby, A. Evans, N. Fleck, L. Gibson, J. Hutchinson, H. Wadley, F. Delale, Metal foams: a design guide, Appl. Mech. Rev., Vol. 54, No. 6, pp. B105-B106, 2001.
[5] J. Choi, R. Lakes, Analysis of elastic modulus of conventional foams and of re-entrant foam materials with a negative Poisson's ratio, International Journal of Mechanical Sciences, Vol. 37, No. 1, pp. 51-59, 1995.
[6] M. Babaei, F. Kiarasi, K. Asemi, M. Hosseini, Functionally graded saturated porous structures: A review, Journal of Computational Applied Mechanics, Vol. 53, No. 2, pp. 297-308, 2022.
[7] M. Babaei, F. Kiarasi, K. Asemi, R. Dimitri, F. Tornabene, Transient thermal stresses in FG porous rotating truncated cones reinforced by graphene platelets, Applied Sciences, Vol. 12, No. 8, pp. 3932, 2022.
[8] M. Babaei, M. H. Hajmohammad, K. Asemi, Natural frequency and dynamic analyses of functionally graded saturated porous annular sector plate and cylindrical panel based on 3D elasticity, Aerospace Science and Technology, Vol. 96, pp. 105524, 2020.
[9] M. Babaei, K. Asemi, Stress analysis of functionally graded saturated porous rotating thick truncated cone, Mechanics Based Design of Structures and Machines, Vol. 50, No. 5, pp. 1537-1564, 2022.
[10] M. Babaei, K. Asemi, F. Kiarasi, Dynamic analysis of functionally graded rotating thick truncated cone made of saturated porous materials, Thin-Walled Structures, Vol. 164, pp. 107852, 2021.
[11] M. Mohammadi, A. Farajpour, A. Moradi, M. Hosseini, Vibration analysis of the rotating multilayer piezoelectric Timoshenko nanobeam, Engineering Analysis with Boundary Elements, Vol. 145, pp. 117-131, 2022.
[12] M. Mohammadi, A. Rastgoo, Primary and secondary resonance analysis of FG/lipid nanoplate with considering porosity distribution based on a nonlinear elastic medium, Mechanics of Advanced Materials and Structures, Vol. 27, No. 20, pp. 1709-1730, 2020.
[13] M. Mohammadi, M. Hosseini, M. Shishesaz, A. Hadi, A. Rastgoo, Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads, European Journal of Mechanics-A/Solids, Vol. 77, pp. 103793, 2019.
[14] M. Mohammadi, M. Safarabadi, A. Rastgoo, A. Farajpour, Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment, Acta Mechanica, Vol. 227, pp. 2207-2232, 2016.
[15] M. Mohammadi, M. Ghayour, A. Farajpour, Free transverse vibration analysis of circular and annular graphene sheets with various boundary conditions using the nonlocal continuum plate model, Composites Part B: Engineering, Vol. 45, No. 1, pp. 32-42, 2013.
[16] M. Mohammadi, M. Goodarzi, M. Ghayour, A. Farajpour, Influence of in-plane pre-load on the vibration frequency of circular graphene sheet via nonlocal continuum theory, Composites Part B: Engineering, Vol. 51, pp. 121-129, 2013.
[17] M. Mohammadi, M. Ghayour, A. Farajpour, Using of new version integral differential method to analysis of free vibration orthotropic sector plate based on elastic medium, in Proceeding of, www.civilica.com/Paper-ISME19-ISME19_497.html, pp. 497.
[18] M. Mohammadi, A. Farajpour, A. Rastgoo, Coriolis effects on the thermo-mechanical vibration analysis of the rotating multilayer piezoelectric nanobeam, Acta Mechanica, Vol. 234, No. 2, pp. 751-774, 2023/02/01, 2023.
[19] F. Kiarasi, M. Babaei, K. Asemi, R. Dimitri, F. Tornabene, Three-dimensional buckling analysis of functionally graded saturated porous rectangular plates under combined loading conditions, Applied Sciences, Vol. 11, No. 21, pp. 10434, 2021.
[20] M. Babaei, K. Asemi, P. Safarpour, Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory, Iranian Journal of Mechanical Engineering Transactions of the ISME, Vol. 20, No. 1, pp. 94-112, 2019.
[21] E. Magnucka-Blandzi, Axi-symmetrical deflection and buckling of circular porous-cellular plate, Thin-walled structures, Vol. 46, No. 3, pp. 333-337, 2008.
[22] M. Jabbari, A. Mojahedin, M. Haghi, Buckling analysis of thin circular FG plates made of saturated porous-soft ferromagnetic materials in transverse magnetic field, Thin-Walled Structures, Vol. 85, pp. 50-56, 2014.
[23] A. Mojahedin, M. Jabbari, M. Salavati, Axisymmetric buckling of saturated circular porous-cellular plate based on first-order shear deformation theory, International Journal of Hydromechatronics, Vol. 2, No. 4, pp. 144-158, 2019.
[24] A. Mojahedin, M. Jabbari, A. Khorshidvand, M. Eslami, Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher order shear deformation theory, Thin-Walled Structures, Vol. 99, pp. 83-90, 2016.
[25] A. Rezaei, A. Saidi, Buckling response of moderately thick fluid-infiltrated porous annular sector plates, Acta Mechanica, Vol. 228, pp. 3929-3945, 2017.
[26] E. S. Rad, A. Saidi, A. Rezaei, M. Askari, Shear deformation theories for elastic buckling of fluid-infiltrated porous plates: an analytical approach, Composite Structures, Vol. 254, pp. 112829, 2020.
[27] E. Arshid, S. Amir, A. Loghman, Bending and buckling behaviors of heterogeneous temperature-dependent micro annular/circular porous sandwich plates integrated by FGPEM nano-Composite layers, Journal of Sandwich Structures & Materials, Vol. 23, No. 8, pp. 3836-3877, 2021.
[28] M. H. Sharifan, M. Jabbari, Mechanical buckling analysis of saturated porous functionally graded elliptical plates subjected to in-plane force resting on two parameters elastic foundation based on HSDT, Journal of Pressure Vessel Technology, Vol. 142, No. 4, pp. 041302, 2020.
[29] Z. Zhou, Y. Ni, Z. Tong, S. Zhu, J. Sun, X. Xu, Accurate nonlinear buckling analysis of functionally graded porous graphene platelet reinforced composite cylindrical shells, International Journal of Mechanical Sciences, Vol. 151, pp. 537-550, 2019.
[30] D. Shahgholian-Ghahfarokhi, G. Rahimi, A. Khodadadi, H. Salehipour, M. Afrand, Buckling analyses of FG porous nanocomposite cylindrical shells with graphene platelet reinforcement subjected to uniform external lateral pressure, Mechanics Based Design of Structures and Machines, Vol. 49, No. 7, pp. 1059-1079, 2021.
[31] D. Shahgholian-Ghahfarokhi, M. Safarpour, A. Rahimi, Torsional buckling analyses of functionally graded porous nanocomposite cylindrical shells reinforced with graphene platelets (GPLs), Mechanics Based Design of Structures and Machines, Vol. 49, No. 1, pp. 81-102, 2021.
[32] J. Yang, D. Chen, S. Kitipornchai, Buckling and free vibration analyses of functionally graded graphene reinforced porous nanocomposite plates based on Chebyshev-Ritz method, Composite Structures, Vol. 193, pp. 281-294, 2018.
[33] Y. Dong, L. He, L. Wang, Y. Li, J. Yang, Buckling of spinning functionally graded graphene reinforced porous nanocomposite cylindrical shells: An analytical study, Aerospace Science and Technology, Vol. 82, pp. 466-478, 2018.
[34] R. Ansari, R. Hassani, R. Gholami, H. Rouhi, Nonlinear bending analysis of arbitrary-shaped porous nanocomposite plates using a novel numerical approach, International Journal of Non-Linear Mechanics, Vol. 126, pp. 103556, 2020.
[35] S. Kitipornchai, D. Chen, J. Yang, Free vibration and elastic buckling of functionally graded porous beams reinforced by graphene platelets, Materials & Design, Vol. 116, pp. 656-665, 2017.
[36] C. Twinkle, J. Pitchaimani, Free vibration and stability of graphene platelet reinforced porous nano-composite cylindrical panel: Influence of grading, porosity and non-uniform edge loads, Engineering Structures, Vol. 230, pp. 111670, 2021.
[37] Q. H. Nguyen, L. B. Nguyen, H. B. Nguyen, H. Nguyen-Xuan, A three-variable high order shear deformation theory for isogeometric free vibration, buckling and instability analysis of FG porous plates reinforced by graphene platelets, Composite Structures, Vol. 245, pp. 112321, 2020.
[38] M. R. Anamagh, B. Bediz, Free vibration and buckling behavior of functionally graded porous plates reinforced by graphene platelets using spectral Chebyshev approach, Composite Structures, Vol. 253, pp. 112765, 2020.
[39] H. Yaghoobi, F. Taheri, Analytical solution and statistical analysis of buckling capacity of sandwich plates with uniform and non-uniform porous core reinforced with graphene nanoplatelets, Composite Structures, Vol. 252, pp. 112700, 2020.
[40] G. R. Asgari, A. Arabali, M. Babaei, K. Asemi, Dynamic instability of sandwich beams made of isotropic core and functionally graded graphene platelets-reinforced composite face sheets, International Journal of Structural Stability and Dynamics, Vol. 22, No. 08, pp. 2250092, 2022.
[41] M. Babaei, F. Kiarasi, M. S. Tehrani, A. Hamzei, E. Mohtarami, K. Asemi, Three dimensional free vibration analysis of functionally graded graphene reinforced composite laminated cylindrical panel, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 236, No. 8, pp. 1501-1514, 2022.
[42] M. Khatounabadi, M. Jafari, K. Asemi, Low-velocity impact analysis of functionally graded porous circular plate reinforced with graphene platelets, Waves in Random and Complex Media, pp. 1-27, 2022.
[43] F. Kiarasi, A. Asadi, M. Babaei, K. Asemi, M. Hosseini, Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading, Journal of Computational Applied Mechanics, Vol. 53, No. 1, pp. 1-23, 2022.
[44] M. Babaei, K. Asemi, F. Kiarasi, Static response and free-vibration analysis of a functionally graded annular elliptical sector plate made of saturated porous material based on 3D finite element method, Mechanics Based Design of Structures and Machines, pp. 1-25, 2020.
[45] R. Mahmoudi, A. Barati, M. Hosseini, A. Hadi, Torsional vibration of functionally porous nanotube based on nonlocal couple stress theory, International Journal of Applied Mechanics, Vol. 13, No. 10, pp. 2150122, 2021.
[46] E. Sobhani, A. R. Masoodi, R. Dimitri, F. Tornabene, Free vibration of porous graphene oxide powder nano-composites assembled paraboloidal-cylindrical shells, Composite Structures, Vol. 304, pp. 116431, 2023.
[47] M. R. Eslami, M. R. Eslami, Finite Element of Elastic Membrane, Finite Elements Methods in Mechanics, pp. 35-55, 2014. | ||
|
آمار تعداد مشاهده مقاله: 499 تعداد دریافت فایل اصل مقاله: 507 |
||