Behavior of Sheet Pile Wall Adjacent to a Square and Circular Footing

ABAQUS. (2012). Abaqus manual (computer software), Providence, RI: SIMULIA.

Ahmadpour, B., Sakhi, M.A. and Kamalian, M. (2018). “Study of loose soil layer effects on excavations supported by steel sheet pile walls-a numerical study”, Journal of Engineering Geology, 12, 31-54, https://doi.org/10.18869/acadpub.jeg.12.5.31.

Bahrami, M., Khodakarami, M.I. and Haddad, A. (2018). “3D numerical investigation of the effect of wall penetration depth on excavations behavior in sand”, Computers and Geotechnics, 98, 82-92,  https://doi.org/10.1016/j.compgeo.2018.02.009.

Basha, A. and Elsiragy, M. (2019). “Effect of sheet pile driving on geotechnical behavior of adjacent building in sand: Numerical study”, Civil Engineering Journal, 5(8), 1726-1737, http://doi.org/10.28991/cej-2019-03091366.

Bilgin, Ö. (2012). “Lateral earth pressure coefficients for anchored sheet pile walls”, International Journal of Geomechanics, 12(5), 584-595, https://doi.org/10.1061/(asce)gm.1943-5622.0000154.

Bose, S.K. and Som, N.N. (1998). “Parametric study of a braced cut by finite element method”, Computers and Geotechnics, 22(2), 91-107, https://doi.org/10.1016/S0266-352X(97)00033-5.

Chowdhury, S.S., Deb, K. and Sengupta, A. (2013). “Estimation of design parameters for braced excavation: Numerical study”, International Journal of Geomechanics, 13(3), 234-247, https://doi.org/10.1061/(asce)gm.1943-5622.0000207.

Deb, P. and Pal, S.K. (2019). “Numerical analysis of piled raft foundation under combined vertical and lateral loading”, Ocean Engineering, 190, 106431, https://doi.org/10.1016/j.oceaneng.2019.106431.

Debnath, A. and Pal, S.K. (2023a). “A numerical analysis on anchored sheet pile wall subjected to surcharge strip loading”, Journal of Engineering Research, 11(3), 62-74,  https://doi.org/10.1016/j.jer.2023.100088.

Debnath, A. and Pal, S.K. (2023b). “Influence of surcharge strip loads on the behavior of cantilever sheet pile walls: A numerical study”, Journal of Engineering Research, 11(1), 100029, https://doi.org/10.1016/j.jer.2023.100029.

Fall, M., Gao, Z. and Ndiaye, B.C. (2019). “Three-dimensional response of double anchored sheet pile walls subjected to excavation and construction sequence”, Heliyon, 5(3), https://doi.org/10.1016/j.heliyon.2019.e01348.

Georgiadis, M. and Anagnostopoulos, C. (1998). “Lateral pressure on sheet pile walls due to strip load”, Journal of Geotechnical and Geoenvironmental Engineering, 124(1), 95-98, https://doi.org/10.1061/(asce)1090-0241(1998)124:1(95).

Guo, P., Gong, X. and Wang, Y. (2019). “Displacement and force analyses of braced structure of deep excavation considering unsymmetrical surcharge effect”, Computers and Geotechnics, 113, 103102, https://doi.org/10.1016/j.compgeo.2019.103102.

Hakeem, B.M. (2024). “Investigation of a loaded pile responses due to proposed deep excavation in sand soil: Finite element analysis using Plaxis 3d program”, Civil Engineering Infrastructures Journal, https://doi.org/10.22059/CEIJ.2024.365637.1963.

Hsiung, B.C.B. (2009). “A case study on the behaviour of a deep excavation in sand”, Computers and Geotechnics, 36(4), 665-675, https://doi.org/10.1016/j.compgeo.2008.10.003

Jaky, J. (1944). “The coefficient of earth pressure at rest”, Journal of the Society of Hungarian Architects and Engineers, 78(22), 355-358.

Li, Y., Zhang, W. and Zhang, R. (2022). “Numerical investigation on performance of braced excavation considering soil stress-induced anisotropy”, Acta Geotechnica, 17(2), 563-575, https://doi.org/10.1007/s11440-021-01171-3.

Ozpolat, A. and Aksoy, H.S. (2022). “The effect of distance between sheet pile and foundation on bearing capacity of foundation”, Advances in Civil Engineering, 2022(1), 7338718,  https://doi.org/10.1155/2022/7338718. 

Peck, R.B. (1969). “Deep excavations and tunneling in soft ground”, Proceedings of the Seventh ICSMFE, State of the Art, (pp. 225-290), Mexico,

Pradeep, T., GuhaRay, A., Bardhan, A., Samui, P., Kumar, S. and Armaghani, D.J. (2022). “Reliability and prediction of embedment depth of sheet pile walls using hybrid ANN with optimization techniques”, Arabian Journal for Science and Engineering, 47(10), 12853-12871, https://doi.org/10.1007/s13369-022-06607-w.

Samadhiya, N.K. (2020). “Evaluation of model sheet pile wall adjacent to a strip footing-an experimental investigation”, International Journal of Geotechnical Engineering, 14(7), 828-835, https://doi.org/10.1080/19386362.2019.1581459.

Schroeder, W.L. and Roumillac, P. (1983). “Anchored bulkheads with sloping dredge lines”, Journal of Geotechnical Engineering, 109(6), 845-851, https://doi.org/10.1061/(ASCE)0733-9410(1983)109:6(845).

Shafiqul Islam, M., Rokonuzzaman, M. and Sakai, T. (2017). “Shape effect of square and circular footing under vertical loading: experimental and numerical studies”, International Journal of Geomechanics, 17(9), 1-9, https://doi.org/10.1061/(ASCE)GM.1943-5622.0000965.

Singh, A.P. and Chatterjee, K. (2020a). “Lateral earth pressure and bending moment on sheet pile walls due to uniform surcharge”, Geomechanics and Engineering, 23(1), 71-83, https://doi.org/10.12989/gae.2020.23.1.071.

Singh, A.P. and Chatterjee, K. (2020b). “Ground settlement and deflection response of cantilever sheet pile wall subjected to surcharge loading”, Indian Geotechnical Journal, 50(4), 540-549, https://doi.org/10.1007/s40098-019-00387-1.

Singh, A.P. and Chatterjee, K. (2020c). “Influence of soil type on static response of cantilever sheet pile walls under surcharge loading: A numerical study”, Arabian Journal for Geosciences, 13, https://doi.org/10.1007/s12517-020-5170-x.

Sowers, G.B. and Sowers, G.F. (1967). “Failures of bulkhead and excavation bracing”, Civil Engineering, 37(1), 72-77, https://trid.trb.org/View/121910.

Tabaroei, A., Sarfarazi, V., Pouraminian, M. and Mohammadzadeh, D. (2022). “Evaluation of behavior of a deep excavation by three-dimensional numerical modeling”, Periodical Polytechnica Civil Engineering, 66(3), 967-977, https://doi.org/10.3311/PPci.20353.

Tsinker, G.P. (1983). “Anchored sheet pile bulkheads: Design practice”, Journal of Geotechnical Engineering, 109(8), 1021-1038, https://doi.org/10.1061/(ASCE)0733-9410(1983)109:8(1021).

USS Design Manual. (1984). “Steel sheet piling United States”, Steel Updated and reprinted by US Department of Transportation, FHWA with permission.

Wang, J., Xiang, H. and Yan, J. (2019). “Numerical simulation of steel sheet pile support structures in foundation pit excavation”, International Journal of Geomechanics, 19(4), 05019002, https://doi.org/10.1061/(ASCE)GM.1943-5622.0001373.

Wood, D.M. (2004). Geotechnical modelling (Applied Geotechnics; V. 1), Boca Raton FL USA, CRC Press Taylor and Francis Group/Books, https://wp.kntu.ac.ir/fz_kalantary/Source/Plasticity/(David%20Muir%20Wood)%20Geotechnical%20modelling.pdf.

Zhang, R., Goh, A.T.C., Li, Y., Hong, L. and Zhang, W. (2021). “Assessment of apparent earth pressure for braced excavations in anisotropic clay”, Acta Geotechnica, 16, 1615-1626, https://doi.org/10.1007/s11440-020-01129-x.