پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 162 |
| تعداد شمارهها | 6,578 |
| تعداد مقالات | 71,076 |
| تعداد مشاهده مقاله | 125,703,730 |
| تعداد دریافت فایل اصل مقاله | 98,937,410 |
3-node Basic Displacement Functions in Analysis of Non-Prismatic Beams | ||
| Journal of Computational Applied Mechanics | ||
| مقاله 9، دوره 46، شماره 1، فروردین 2015، صفحه 77-91 اصل مقاله (1.34 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jcamech.2015.53396 | ||
| نویسندگان | ||
| Ahmad Modarakar Haghighi* 1؛ Mohammad Zakeri2؛ Reza Attarnejad3 | ||
| 1School of Civil Engineering, College of Engineering, University of Tehran, Tehran P.O. Box 11365-4563, Iran | ||
| 2Assistant Professor, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran | ||
| 3MS Graduate, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran | ||
| چکیده | ||
| Purpose– Analysis of non-prismatic beams has been focused of attention due to wide use in complex structures such as aircraft, turbine blades and space vehicles. Apart from aesthetic aspect, optimization of strength and weight is achieved in use of this type of structures. The purpose of this paper is to present new shape functions, namely 3-node Basic Displacement Functions (BDFs) for derivation of structural matrices for general non-prismatic Euler-Bernoulli beam elements. Design/methodology/approach– Static analysis and free transverse vibration of non-prismatic beams are extracted studied from a mechanical point of view. Following structural/mechanical principles, new static shape functions are in terms of BDFs, which are obtained using unit-dummy-load method. All types of cross-sections and cross-sectional dimensions of the beam element could be considered in this method. Findings– According to the outcome of static analysis, it is verified that exact results are obtained by applying one or a few elements. Furthermore, it is observed that results from both static and free transverse vibration analysis are in good agreement with the previous published once in the literature. Research limitations/implications– The method can be extended to structural analysis of curved and Timoshenko beams as well as plates and shells. Furthermore, exact dynamic shape functions can be derived using BDFs by solving the governing equation for transverse vibration of beams. Originality/value– The present investigation introduces new shape functions, namely 3-node Basic Displacement Functions (BDFs) extended from 2-node functions, and then compares its performance with previous element. | ||
| کلیدواژهها | ||
| 3-node basic displacement functions؛ free transverse vibration؛ non-prismatic beam؛ shape functions؛ Static analysis | ||
| مراجع | ||
|
[1]. Gunda J.B., Ganguli R., 2008, New rational interpolation functions for finite element analysis of rotating beams, Int. J. Mech. Sci. 50: 578-588. [2]. Caruntu D.I., 2009, Dynamic modal characteristics of transverse vibrations of cantilevers of parabolic thickness, Mech. Res. Commun. 36: 391–404. [3]. Gallagher R.H., Lee C.H., 1970, Matrix dynamic and instability analysis with nonuniform elements, J. Numer. Meth. Eng. 2: 265- 275. [4]. Karabalis D.L., Beskos D.E., 1983, Static, dynamic and stability analysis of structures composed of tapered beams, Comput. Struct. 16: 731-748. [5]. Eisenberger M., Reich Y., 1989, Static, vibration and stability analysis of non-uniform beams, Comput. Struct. 31: 563-571. [6]. Eisenberger M., 1986, An exact element method, Int. J. Numer. Meth. Eng. 30: 363-370. [7]. Eisenberger M., 1991, Exact solution for general variable cross-section members, Comput. Struct. 41: 765-772. [8]. Banerjee J.R., Williams F.W., 1985, Exact Bernoulli-Euler dynamic stiffness matrix for a range of tapered beam, J. Numer. Meth. Eng. 21: 2289-2302. [9]. Mou Y., Han R.S.P., Shah A.H., 1997, Exact dynamic stiffness matrix for beams of arbitrarily varying cross sections, Int. J. Numer. Meth. Eng. 40: 233-250. [10]. Chambers J.J., Almudhafar S., Stenger F., 2003, Effect of reduced beam section frame elements on stiffness of moment frames, J. Struct. Eng. 129: 383-393. [11]. Kim K.D., Engelhardt M.D., 2007, Nonprismatic beam element for beams with RBS connections in steel moment frames, J. Struct. Eng. 133: 176-184. [12]. Ece M.C., Aydogdu M., Taskin V., 2007, Vibration of a variable cross-section beam, Mech. Res. Commun. 34: 78-84. [13]. Banerjee J.R., 2000, Free vibration of centrifugally stiffened uniform and tapered beams using the dynamic stiffness method. J. Sound Vib. 233: 857-875. [14]. Wang G., Wereley N.M., 2004, Free vibration analysis of rotating blades with uniform tapers, J. AIAA 42: 2429-2437. [15]. Banerjee J.R., Su H., 2006, Jackson D.R., Free vibration of rotating tapered beams using the dynamic stiffness method, J. Sound Vib. 298: 1034-1054. [16]. Ruta P., 1999, Application of Chebyshev series to solution of non-prismatic beam vibration problems, J. Sound Vib. 227: 449-467. [17]. Auciello N.M., Ercolano A., 2004, A general solution for dynamic response of axially loaded non-uniform Timoshenko beams, Int. J. Solids Struct. 41: 4861–4874. [18]. Ho S.H., Chen C.K., 1998, Analysis of general elastically end restrained non-uniform beams using differential transform, Appl. Math. Model. 22: 219–234. [19]. Zeng H., Bert C.W., 2001, Vibration analysis of a tapered bar by differential transformation, J. Sound Vib. 242: 737–739. [20]. Ozdemir O., Kaya M.O., 2006, Flapwise bending vibration analysis of a rotating tapered cantilever Bernoulli–Euler beam by differential transform method, J. Sound Vib. 289: 413–420. [21]. Ozdemir O., Kaya M.O., 2006, Flapwise bending vibration analysis of double tapere rotating Euler–Bernoulli beam by using the differential transform method, Meccanica 40: 661–670. [22]. Seval C., 2008, Solution of free vibration equations of beam on elastic soil by using differential transform method, Appl. Math. Model 32: 1744-1757. [23]. Balkaya M., Kaya M.O., Saglamer A., 2009, Analysis of the vibration of an elastic beam supported on elastic soil using the differential transform method, Arch. Appl. Mech. 79: 135–146. [24]. Catal S., 2008, Solution of free vibration equations of beam on elastic soil by using differential transform method, Appl. Math. Model. 32: 1744–1757. [25]. Yesilce Y., Catal S., 2009, Free vibration of axially loaded Reddy-Bickford beam on elastic soil using the differential transform method, Struct. Eng. Mech. 31: 453–476. [26]. Yesilce Y., 2010, DTM and DQEM for free vibration of axially loaded and semi-rigid-connected Reddy-Bickford beam, Commun. Numer. Meth. Eng. 27: 666-693. [27]. Attarnejad R., Shahba A., 2008, Application of differential transform method in free vibration analysis of rotating non-prismatic beams, World Appl. Sci. J. 5: 441-448. [28]. Shahba A., Rajasekaran S., 2012, Free vibration and stability of tapered Euler-Bernoulli beams made of axially functionally graded materials, Appl. Math. Model. 36: 3094-3111. [29]. Attarnejad R., 2000, On the derivation of the geometric stiffness and consistent mass matrices for non-prismatic Euler-Bernoulli beam elements, Barcelona, Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering. [30]. Attarnejad R., 2002, Free vibration of non-prismatic beams, New York, Proceedings of 15th ASCE Engineering Mechanics Conference. [31]. Attarnejad R., 2010, Basic displacement functions in analysis of non-prismatic beams, Eng. Comput. 27: 733-776. [32]. Attarnejad R., Shahba A., 2011, Basic displacement functions in analysis of centrifugally stiffened tapered beams, AJSE 36: 841-853. [33]. Attarnejad R., Shahba A., Semnani S.J., 2011, Analysis of non-prismatic Timoshenko beams using basic displacement functions, Adv. Struct. Eng. 14: 319-332. [34]. Attarnejad R., Shahba A., 2010, Dynamic basic displacement functions in free vibration analysis of centrifugally stiffened tapered beams; a mechanical solution, Meccanica 46: 1267-1281. [35]. Attarnejad R., Shahba A., 2011, Basic displacement functions for centrifugally stiffened tapered beams, Commun. Numer. Meth. Eng. 27: 1385-1397. [36]. Attarnejad R., Semnani S.J., Shahba A., 2010, Basic displacement functions for free vibration analysis of non-prismatic Timoshenko beams, Finite Elem. Anal. Des. 46: 916-929. [37]. Attarnejad R., Shahba A., Eslaminia M., 2011, Dynamic basic displacement functions for free vibration analysis of tapered beams, J. Vib. Control 17: 2222-2238. [38]. Franciosi C., Mecca M., 1998, Some finite elements for the static analysis of beams with varying cross section, Comput. Struct. 69: 191- 196. [39]. Cranch E.T., Adler A.A., 1956, Bending vibration of variable section beams, J. Appl. Mech. 23: 103–108. [40]. Tong X., Tabarrok B., 1995, Vibration analysis of Timoshenko beams with nonhomogeneity and varying cross-section, J. Sound Vib. 186: 821–835. | ||
|
آمار تعداد مشاهده مقاله: 4,432 تعداد دریافت فایل اصل مقاله: 1,641 |
||
سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب