|تعداد مشاهده مقاله||111,552,676|
|تعداد دریافت فایل اصل مقاله||86,182,858|
Evaluating the Effect of Graphite Source and Operating Conditions on the Synthesis of Graphene Oxide
|Journal of Chemical and Petroleum Engineering|
|مقاله 5، دوره 50، شماره 2، اردیبهشت 2017، صفحه 37-45 اصل مقاله (1.29 M)|
|نوع مقاله: Original Paper|
|شناسه دیجیتال (DOI): 10.22059/jchpe.2017.60503|
|Bahareh Kianpour1؛ Akram Ebrahimi1؛ Zeinab Salehi* 2؛ Shohreh Fatemi3|
|1M.Sc. Student, Dept. of Chemical Eng., University of Tehran, Tehran, Iran.|
|2Assistant Professor, Dept. of Chemical Eng., University of Tehran, Tehran, Iran.|
|3Professor, Dept. of Chemical Eng., University of Tehran, Tehran, Iran.|
|In this research graphene oxide was synthesized by two methods. These methods were achieved by changing the improved Hummers’ and modified Hummers’ methods. Structure of graphene oxide was characterized by scanning electron microscopy (SEM) images, X-ray diffraction (XRD) patterns, Raman spectroscopy and Fourier transform infrared (FTIR) spectra. According to SEM image, the thickness of graphene oxide sheets prepared by improved Hummers’ method is about 66 nm. In improved Hummers’ method excluding NaNO3 from reacting gel and performing reaction in a 9:1 volume ratio of concentrated H2SO4/H3PO4 mixture improved the oxidation process by elimination of toxic gases, finally the prepared GO contains well-oxidized carbon materials. XRD results implied more oxidation for synthesized GO by improved Hummers’ based method. Importance of graphite source was shown in synthesis of pure GO. Two sources of graphite supplied by Daejung and Fluka Companies were used to synthesis GO in improved Hummers’ method. According to SEM images and XRD patterns, the graphite source prepared by Fluka Co. was more efficient towards production of pure GO than other graphite source. The results also indicated that temperature and mixing condition are two important factors for synthesis of GO.|
|Graphite source؛ Graphene oxide؛ Operating condition؛ synthesis|
 Moktadir, Z. (2014). “ Graphene nanoelectrome chanics (NEMS), in Graphene: properties, preparation, characterisation and devices, First edition. London, GB, Woodhead , pp. 341-358.
 Geim, A.K. and Novoselov, K.S. (2007). “The rise of grapheme.” Nature Materials , Vol. 6, No. 3, pp. 183-191.
 Stankovich, S., Dikin, D.A., Dommett, G. H., Kohlhaas, K.M., Zimney, E.J. (2006). “Graphene-based composite materials.” Nature , Vol. 442, No. 7100, pp. 282-286.
 Geim, A.K. (2009). “Graphene: status and prospects.” Science, Vol. 324, No. 5934, pp. 1530- 1534.
 Novoselov, K.S., Geim, A.K., Morozov, S.V., Jiang, D., Zhang, Y., Dubonos, S.V., Grigorieva, I.V. and Firsov, A.A. (2004). “ Electric field effect in atomically thin carbon films.” Science, Vol. 306, No. 5696, pp. 666-669 44.
 Kim, K.S., Zhao, Y., Jang, H, Lee, S.Y., Kim, J.M. (2009). “Large-scale pattern growth of graphene films for stretchable transparent electrodes.” Nature , Vol. 457, No. 7230, pp. 706-710.
 Kovtyukhova, N.I., Ollivier, P.J., Martin, B.R., Mallouk, T.E., Chizhik, S.A. (1999). “Layer-by- layer assembly of ultrathin composite films from micron-sized graphite oxide sheets and polycations.” Chemistry of Materials , Vol. 11, No. 3, pp. 771-778.
 Wang, Y., Xie, L., Sha, J., Ma, Y., Han, J. (2011). “Preparation and chemical reduction of laurylamine-intercalated graphite oxide.” Materials Science, Vol. 46, No. 10, pp. 3611-3621.
 Yoon, S., and In, I. (2011). “Role of poly (N-vinyl-2-pyrrolidone) as stabilizer for dispersion of graphene via hydrophobic interaction.” Materials Science, Vol. 46, No. 5, pp. 1316-1321.
 Liu, J., Cui, L., and Losic, D. (2013). “Graphene and graphene oxide as new nanocarriers for drug delivery applications.” Acta Biomaterialia, Vol. 9, No. 12, pp. 9243-9257.
 Dreyer, D.R., Park, S., Bielawski, C.W. and Ruoff, R.S. (2010). “The chemistry of graphene oxide.” Chemical Society Reviews, Vol. 39, No. 1, pp. 228-240.
 Marcano, D.C., Kosynkin, D.V., Berlin, J.M., Sinitskii, A., Sun, Z. (2010). “Improved synthesis of graphene oxide.” ACS Nano, Vol. 4, No. 8, pp. 4806-4814.
 Stankovich, S., Piner, R.D., Chen, X., Wu, N., Nguyen, S.T., and Ruoff, R.S. (2006). “Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly (sodium 4-styrenesulfonate).” Journal of Materials Chemistry, Vol. 16, No. 2, pp. 155-158.
 Brodie, B.C. (1859). “On the Atomic Weight of Graphite.” Philosophical Transactions of the Royal Society of London, Vol. 149, pp. 249-259.
 Staudenmaier, L. (1898). “Verfahren zur Dar-stellung der Graphitsaure.” Berichte der Deutschen Chemischen Gesellschaft, Vol. 31, No. 2, pp. 1481- 1487.
 Hummers, W.S. and Offeman, R.E. (1958). “Preparation of Graphitic Oxide.” American Chemical Society, Vol. 80, No. 6, pp. 1339-1339.
 Chua, C.K. and Pumera, M. (2014). “Chemical reduction of graphene oxide: a synthetic chemistry viewpoin.” Chemical Society Reviews , Vol. 43, No. 1, pp. 291-312.
 Huang, X., Qi, X., Boey, F. and Zhang, H. (2012). “Graphene-based composites.” Chemical Society Reviews, Vol. 41, No. 2, pp. 666-686.
 Lightcap, I.V. and Kamat, P.V. (2012). “Graphitic design: prospects of graphene-based nanocomposites for solar energy conversion, storage, and sensing.” Accounts of Chemical Research, Vol. 46, No. 10, pp. 2235-2243.
 Sun, X., Liu, Z., Welsher, K., Robinson, J.T., Goodwin, A., Zaric, S. and Dai, H. (2008). “Nano-graphene oxide for cellular imaging and drug delivery.” Nano Research , Vol. 1, No. 3, pp. 203- 212.
 Chung, C., Kim, Y.K., Shin, D., Ryoo, S.R., Hong, B.H., Min, D.H. (2013). “Biomedical applications of graphene and graphene oxide.” Accounts of Chemical Research , Vol. 46, No. 10, pp. 2211-2224.
 Wang, Y., Li, Z., Wang, J., Li, J. and Lin, Y. (2011). “Graphene and graphene oxide: biofunctionalization and applications in biotechnology.” Trends in Biotechnology , Vol. 29 , No. 5, pp. 205-212.
 Pyun, J. (2011).”Graphene oxide as catalyst: application of carbon materials beyond nanotechnology.” Angewandte Chemie International Edition , Vol. 50, No. 1, pp. 46-48.
 Kim, J., Cote, L. J., Kim, F., Yuan, W., Shull, K. R., and Huang, J. (2010). “Graphene oxide sheets at interfaces.” American Chemical Society , Vol. 132, No. 23, pp. 8180-8186.
 Cote, L.J., Kim, J., Tung, V.C., Luo, J., Kim, F., Huang, J. (2010). “Graphene oxide as surface tant sheets.” Pure and Applied Chemistry , Vol. 83, No. 1, pp. 95-110.
 He, H., Riedl, T., Lerf, A. and Klinowski, J. (1996). “Solid-state NMR studies of the structure of graphite oxide.” Physical Chemistry, Vol. 100, No. 51, pp. 19954-19958.
 Dimiev, A.M. and Tour, J.M. (2014). “Mechanism of graphene oxide formation.” ACS Nano , Vol. 8, No. 3, pp. 3060-3068.
 Higginbotham, A., Kosynkin, D., Sinitskii, A., Sun, Z., Tour, J.M. (2010). “Lower- defect graphene oxide nanoribbons from multiwalled catbon nanotubes.” ACS Nano , Vol. 4, No. 4, pp. 2059-2069.
 Shi, C., Chen, L., Xu, Z., Jiao, Y., Li, Y. (2012). “Monitoring influence of chemical preparation procedure on the structure of graphene nanosheets.” Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No.7-8, pp. 1420-1424.
 Shahriary, L. and Athawale, A.A. (2014). “Graphene oxide synthesized by using modified hummers approach.” Renew. Energy and Env. Engg , Vol. 2, No. 1, pp. 58-63.
 Tuinstra, F. and Koenig, J.L. (1970). “Raman spectrum of graphite.” Chemical Physics , Vol. 53, No. 3, pp. 1126-1130.
 Ferrari, A.C. and Robertson, J. (2000). “Interpretation of Raman spectra of disordered and amorphous carbon.” Physical Review B, Vol. 61, No. 20, pp. 14095-14107.
 Kudin, K.N., Ozbas, B., Schniepp, H.C., Prud’Ho-mme, R.K., Aksay, I.A. and Car, R. (2008). “Raman spectra of graphite oxide and functionalized graphene sheets.” Nano Letters , Vol. 8, No. 1, pp. 36-41.
 Guo, H., Wang, X., Qian, Q., Wang, F., Xia, X. (2009). “A green approach to the synthesis of graphene nanosheets.” ACS Nano , Vol. 3, No. 9, pp. 2653-2659.
تعداد مشاهده مقاله: 1,592
تعداد دریافت فایل اصل مقاله: 1,448