Prediction for optimizing performance of chisel blade used in combined tillage to obtain suitable effectiveness | ||
| مهندسی بیوسیستم ایران | ||
| Article 8, Volume 49, Issue 1, April 2018, Pages 73-82 PDF (714.58 K) | ||
| Document Type: Research Paper | ||
| DOI: 10.22059/ijbse.2017.233308.664943 | ||
| Authors | ||
| Mohammad Rahmatian1; Seyed Hossein Karparvarfard* 2; Mohammad Amin Nematollahi3 | ||
| 1Graduate Student, Mechanic Biosystem Engineering, Biosystem Engineering Department, College of Agriculture, Shiraz University | ||
| 2University of Shiraz | ||
| 3Assistant Professors, Biosystem Engineering Department, College of Agriculture, Shiraz University | ||
| Abstract | ||
| By installation of rake angle changeable mechanism on single chisel plow frame, prediction for optimizing performance of chisel blade had available. The dependent parameters which considered as mainly treatment were three levels for soil moisture content (0.5 PL, 0.7 PL, 0.9 PL), three levels of rake angle (20°, 30°, 40°) and three levels for forward speed (3, 5, 7 km.h-1) in vs. eight independent parameters include of draft, tractor fuel consumption, driver wheel slip, soil mean weight diameter, cone index, soil disturbance area, soil upheaving area and specific draft had related together in linear multiple regression in three independent equations. The data mining was performed by split split plot in completely randomized. Hence, the best moisture, tine rake angle and forward speed was predicted as 0.8 PL, 36 degree and 5 km.h-1, respectively. Therefore, the minimum magnitude of slip, soil cone index, minimum draft force and fuel consumption were obtained. | ||
| Keywords | ||
| Combination tillage tool; optimum; Forward speed; Rake angle; Moisture content | ||
| References | ||
|
Al-Jasim, A. (1993). The technical and economical indicators for soil harrowing with disk harrows. Mijalat al-3ulu: m al-zira: 3iyyat al-3ira: qiyyat (Iraq). Chaplain, V., Défossez, P., Richard, G., Tessier, D. & Roger-Estrade, J. (2011). Contrasted effects of no-till on bulk density of soil and mechanical resistance. Soil and Tillage Research, 111(2), 105-114. Chen, H., Hou, R., Gong, Y., Li, H., Fan, M. & Kuzyakov, Y. (2009). Effects of 11 years of conservation tillage on soil organic matter fractions in wheat monoculture in Loess Plateau of China. Soil and Tillage Research, 106(1), 85-94. Dehghani, M. & Karparvarfard, S.H. (2017). Optimization of Chisel Tine Operation Used in Combined Tillage Machine. Iranian Journal of Biosystem Engineering, 47(4), 651-658. (In Farsi) Hemmat, A., Ahmadi, I. & Masoumi, A. (2007). Water infiltration and clod size distribution as influenced by ploughshare type, soil water content and ploughing depth. Biosystems engineering, 97(2), 257-266. Ismail, W., Ishak, W. & Burkhardt, T. (1993). Draft and fuel requirements measurement using tractor on-board data acquisition system. Pertanika Journal of Science & Technology, 1(1), 51-64. Makanga, J., Salokh, V. & Gee-Glough, D. (2011). Deformation and force characteristics caused by inclined tines in loam soil with moisture content below liquid limit. journal of agriculture, science and technology, 12(2), 64-78. Melero, S., López-Garrido, R., Murillo, J. M. & Moreno, F. (2009). Conservation tillage: Short-and long-term effects on soil carbon fractions and enzymatic activities under Mediterranean conditions. Soil and Tillage Research, 104(2), 292-298. Raheman, H. & Jha, S. (2007). Wheel slip measurement in 2WD tractor. Journal of terramechanics, 44(1), 89-94. Regional Network for Agricultural Machinery. (1983). RNAM test codes and procedures of farm machinery. Technical Series No. 12 (p. 129). Bangkok: Thailand. Solhjou, A., Fielke, J.M. & Desbiolles, J.M. (2012). Soil translocation by narrow openers with various rake angles. Biosystems engineering, 112(1), 65-73. | ||
|
Statistics Article View: 457 PDF Download: 407 |
||