Functionally graded saturated porous structures: A review

[1]          A. Hadi, M. Z. Nejad, A. Rastgoo, M. Hosseini, Buckling analysis of FGM Euler-Bernoulli nano-beams with 3D-varying properties based on consistent couple-stress theory, Steel and Composite Structures, An International Journal, Vol. 26, No. 6, pp. 663-672, 2018.

[2]          M. M. Khoram, M. Hosseini, A. Hadi, M. Shishehsaz, Bending analysis of bidirectional FGM Timoshenko nanobeam subjected to mechanical and magnetic forces and resting on Winkler–Pasternak foundation, International Journal of Applied Mechanics, Vol. 12, No. 08, pp. 2050093, 2020.

[3]          M. Z. Nejad, N. Alamzadeh, A. Hadi, Thermoelastoplastic analysis of FGM rotating thick cylindrical pressure vessels in linear elastic-fully plastic condition, Composites Part B: Engineering, Vol. 154, pp. 410-422, 2018.

[4]          M. Mohammadi, M. Hosseini, M. Shishesaz, A. Hadi, A. Rastgoo, Primary and secondary resonance analysis of porous functionally graded nanobeam resting on a nonlinear foundation subjected to mechanical and electrical loads, European Journal of Mechanics-A/Solids, Vol. 77, pp. 103793, 2019.

[5]          H. Asemi, S. Asemi, A. Farajpour, M. Mohammadi, Nanoscale mass detection based on vibrating piezoelectric ultrathin films under thermo-electro-mechanical loads, Physica E: Low-dimensional Systems and Nanostructures, Vol. 68, pp. 112-122, 2015.

[6]          S. Asemi, A. Farajpour, H. Asemi, M. Mohammadi, Influence of initial stress on the vibration of double-piezoelectric-nanoplate systems with various boundary conditions using DQM, Physica E: Low-dimensional Systems and Nanostructures, Vol. 63, pp. 169-179, 2014.

[7]          S. Asemi, A. Farajpour, M. Mohammadi, Nonlinear vibration analysis of piezoelectric nanoelectromechanical resonators based on nonlocal elasticity theory, Composite Structures, Vol. 116, pp. 703-712, 2014.

[8]          S. R. Asemi, M. Mohammadi, A. Farajpour, A study on the nonlinear stability of orthotropic single-layered graphene sheet based on nonlocal elasticity theory, Latin American Journal of Solids and Structures, Vol. 11, pp. 1541-1546, 2014.

[9]          M. Baghani, M. Mohammadi, A. Farajpour, Dynamic and stability analysis of the rotating nanobeam in a nonuniform magnetic field considering the surface energy, International Journal of Applied Mechanics, Vol. 8, No. 04, pp. 1650048, 2016.

[10]        M. Danesh, A. Farajpour, M. Mohammadi, Axial vibration analysis of a tapered nanorod based on nonlocal elasticity theory and differential quadrature method, Mechanics Research Communications, Vol. 39, No. 1, pp. 23-27, 2012.

[11]        A. Farajpour, M. Danesh, M. Mohammadi, Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics, Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, No. 3, pp. 719-727, 2011.

[12]        M. Hosseini, M. Shishesaz, K. N. Tahan, A. Hadi, Stress analysis of rotating nano-disks of variable thickness made of functionally graded materials, International Journal of Engineering Science, Vol. 109, pp. 29-53, 2016.

[13]        M. Hosseini, M. Shishesaz, A. Hadi, Thermoelastic analysis of rotating functionally graded micro/nanodisks of variable thickness, Thin-Walled Structures, Vol. 134, pp. 508-523, 2019.

[14]        M. Shishesaz, M. Hosseini, K. Naderan Tahan, A. Hadi, Analysis of functionally graded nanodisks under thermoelastic loading based on the strain gradient theory, Acta Mechanica, Vol. 228, No. 12, pp. 4141-4168, 2017.

[15]        H. Nazari, M. Babaei, F. Kiarasi, K. Asemi, Geometrically nonlinear dynamic analysis of functionally graded material plate excited by a moving load applying first-order shear deformation theory via generalized differential quadrature method, SN Applied Sciences, Vol. 3, No. 11, pp. 1-32, 2021.

[16]        M. Shahsavari, K. Asemi, M. Babaei, F. Kiarasi, Numerical investigation on thermal post-buckling of annular sector plates made of FGM via 3D finite element method, Mechanics of Advanced Composite Structures‎, Vol. 8, No. 2, pp. 309-320, 2021.

[17]        F. Kiarasi, M. Babaei, R. Dimitri, F. Tornabene, Hygrothermal modeling of the buckling behavior of sandwich plates with nanocomposite face sheets resting on a Pasternak foundation, Continuum Mechanics and Thermodynamics, Vol. 33, No. 4, pp. 911-932, 2021.

[18]        A. Farajpour, M. H. Yazdi, A. Rastgoo, M. Loghmani, M. Mohammadi, Nonlocal nonlinear plate model for large amplitude vibration of magneto-electro-elastic nanoplates, Composite Structures, Vol. 140, pp. 323-336, 2016.

[19]        M. Shariyat, K. Asemi, Three-dimensional non-linear elasticity-based 3D cubic B-spline finite element shear buckling analysis of rectangular orthotropic FGM plates surrounded by elastic foundations, Composites Part B: Engineering, Vol. 56, pp. 934-947, 2014.

[20]        A. Hadi, M. Z. Nejad, M. Hosseini, Vibrations of three-dimensionally graded nanobeams, International Journal of Engineering Science, Vol. 128, pp. 12-23, 2018/07/01/, 2018.

[21]        M. Hosseini, A. Hadi, A. Malekshahi, M. Shishesaz, A review of size-dependent elasticity for nanostructures, Journal of Computational Applied Mechanics, Vol. 49, No. 1, pp. 197-211, 2018.

[22]        H. Haghshenas Gorgani, M. Mahdavi Adeli, M. Hosseini, Pull-in behavior of functionally graded micro/nano-beams for MEMS and NEMS switches, Microsystem Technologies, Vol. 25, No. 8, pp. 3165-3173, 2019/08/01, 2019.

[23]        M. Shishesaz, M. Hosseini, Mechanical Behavior of Functionally Graded Nano-Cylinders Under Radial Pressure Based on Strain Gradient Theory, Journal of Mechanics, Vol. 35, No. 4, pp. 441-454, 2018.

[24]        M. Shishesaz, M. Hosseini, Effects of joint geometry and material on stress distribution, strength and failure of bonded composite joints: an overview, The Journal of Adhesion, Vol. 96, No. 12, pp. 1053-1121, 2020/09/09, 2020.

[25]        M. Mousavi Khoram, M. Hosseini, M. Shishesaz, A concise review of nano-plates, Journal of Computational Applied Mechanics, Vol. 50, No. 2, pp. 420-429, 2019.

[26]        M. Shariati, M. Shishesaz, H. Sahbafar, M. Pourabdy, M. Hosseini, A review on stress-driven nonlocal elasticity theory, Journal of Computational Applied Mechanics, Vol. 52, No. 3, pp. 535-552, 2021.

[27]        M. Shishesaz, M. Shariati, M. Hosseini, Size-Effect Analysis on Vibrational Response of Functionally Graded Annular Nano-Plate Based on Nonlocal Stress-Driven Method, International Journal of Structural Stability and Dynamics, Vol. 0, No. 0, pp. 2250098.

[28]        F. Kiarasi, A. Asadi, M. Babaei, K. Asemi, M. Hosseini, Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading, Journal of Computational Applied Mechanics, Vol. 53, No. 1, pp. 1-23, 2022.

[29]        E. C. N. Silva, M. C. Walters, G. H. Paulino, Modeling bamboo as a functionally graded material: lessons for the analysis of affordable materials, Journal of Materials Science, Vol. 41, No. 21, pp. 6991-7004, 2006.

[30]        N. Oxman, S. Keating, E. Tsai, Functionally graded rapid prototyping, Innovative developments in virtual and physical prototyping, pp. 483-489, 2011.

[31]        M. Ali, A. Qamhiyah, D. Flugrad, M. Shakoor, Theoretical and finite element study of a compact energy absorber, Advances in Engineering Software, Vol. 39, No. 2, pp. 95-106, 2008.

[32]        P.-Y. Chen, A. Lin, Y.-S. Lin, Y. Seki, A. Stokes, J. Peyras, E. Olevsky, M. A. Meyers, J. McKittrick, Structure and mechanical properties of selected biological materials, Journal of the mechanical behavior of biomedical materials, Vol. 1, No. 3, pp. 208-226, 2008.

[33]        S. J. Kalita, S. Bose, H. L. Hosick, A. Bandyopadhyay, Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling, Materials Science and Engineering: C, Vol. 23, No. 5, pp. 611-620, 2003.

[34]        L. Cui, S. Kiernan, M. D. Gilchrist, Designing the energy absorption capacity of functionally graded foam materials, Materials Science and Engineering: A, Vol. 507, No. 1-2, pp. 215-225, 2009.

[35]        K. Leong, K. Phua, C. Chua, Z. Du, K. Teo, Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, Vol. 215, No. 2, pp. 191-192, 2001.

[36]        M. A. Biot, Theory of elasticity and consolidation for a porous anisotropic solid, Journal of applied physics, Vol. 26, No. 2, pp. 182-185, 1955.

[37]        M. Babaei, F. Kiarasi, S. M. Hossaeini Marashi, M. Ebadati, F. Masoumi, K. Asemi, Stress wave propagation and natural frequency analysis of functionally graded graphene platelet-reinforced porous joined conical–cylindrical–conical shell, Waves in Random and Complex Media, pp. 1-33, 2021.

[38]        F. Kiarasi, M. Babaei, P. Sarvi, K. Asemi, M. Hosseini, M. Omidi Bidgoli, A review on functionally graded porous structures reinforced by graphene platelets, Journal of Computational Applied Mechanics, Vol. 52, No. 4, pp. 731-750, 2021.

[39]        F. Kiarasi, M. Babaei, S. Mollaei, M. Mohammadi, K. Asemi, Free vibration analysis of FG porous joined truncated conical-cylindrical shell reinforced by graphene platelets, Advances in nano research, Vol. 11, No. 4, pp. 361-380, 2021.

[40]        R. Mahmoudi, A. Barati, M. Hosseini, A. Hadi, Torsional Vibration of Functionally Porous Nanotube Based on Nonlocal Couple Stress Theory, International Journal of Applied Mechanics, Vol. 13, No. 10, pp. 2150122, 2021.

[41]        D. Chen, J. Yang, S. Kitipornchai, Free and forced vibrations of shear deformable functionally graded porous beams, International journal of mechanical sciences, Vol. 108, pp. 14-22, 2016.

[42]        D. Chen, J. Yang, S. Kitipornchai, Elastic buckling and static bending of shear deformable functionally graded porous beam, Composite Structures, Vol. 133, pp. 54-61, 2015.

[43]        J. Parthasarathy, B. Starly, S. Raman, A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications, Journal of Manufacturing Processes, Vol. 13, No. 2, pp. 160-170, 2011.

[44]        D. Wu, A. Liu, Y. Huang, Y. Huang, Y. Pi, W. Gao, Dynamic analysis of functionally graded porous structures through finite element analysis, Engineering Structures, Vol. 165, pp. 287-301, 2018.

[45]        D. Chen, S. Kitipornchai, J. Yang, Dynamic response and energy absorption of functionally graded porous structures, Materials & Design, Vol. 140, pp. 473-487, 2018.

[46]        P. Phung-Van, C. H. Thai, H. Nguyen-Xuan, M. A. Wahab, Porosity-dependent nonlinear transient responses of functionally graded nanoplates using isogeometric analysis, Composites Part B: Engineering, Vol. 164, pp. 215-225, 2019.

[47]        Ş. D. Akbaş, Vibration and static analysis of functionally graded porous plates, Journal of Applied and Computational Mechanics, 2017.

[48]        S. Kitipornchai, D. Chen, J. Yang, Free vibration and elastic buckling of functionally graded porous beams reinforced by graphene platelets, Materials & Design, Vol. 116, pp. 656-665, 2017.

[49]        J. Kim, K. K. Żur, J. Reddy, Bending, free vibration, and buckling of modified couples stress-based functionally graded porous micro-plates, Composite Structures, Vol. 209, pp. 879-888, 2019.

[50]        A. H.-D. Cheng, 2016, Poroelasticity, Springer,

[51]        P. Leclaire, K. Horoshenkov, M. Swift, D. Hothersall, The vibrational response of a clamped rectangular porous plate, Journal of Sound and Vibration, Vol. 247, No. 1, pp. 19-31, 2001.

[52]        K. Magnucki, P. Stasiewicz, Elastic buckling of a porous beam, Journal of Theoretical and Applied Mechanics, Vol. 42, No. 4, pp. 859-868, 2004.

[53]        E. Magnucka-Blandzi, Axi-symmetrical deflection and buckling of circular porous-cellular plate, Thin-walled structures, Vol. 46, No. 3, pp. 333-337, 2008.

[54]        E. Magnucka-Blandzi, K. Magnucki, Effective design of a sandwich beam with a metal foam core, Thin-Walled Structures, Vol. 45, No. 4, pp. 432-438, 2007.

[55]        D. Debowski, K. Magnucki, Dynamic stability of a porous rectangular plate, in Proceeding of, Wiley Online Library, pp. 215-216.

[56]        M. Jabbari, A. Mojahedin, M. Haghi, Buckling analysis of thin circular FG plates made of saturated porous-soft ferromagnetic materials in transverse magnetic field, Thin-Walled Structures, Vol. 85, pp. 50-56, 2014.

[57]        M. Jabbari, M. Hashemitaheri, A. Mojahedin, M. Eslami, Thermal buckling analysis of functionally graded thin circular plate made of saturated porous materials, Journal of thermal stresses, Vol. 37, No. 2, pp. 202-220, 2014.

[58]        M. Feyzi, A. Khorshidvand, Axisymmetric post-buckling behavior of saturated porous circular plates, Thin-Walled Structures, Vol. 112, pp. 149-158, 2017.

[59]        A. Rezaei, A. Saidi, On the effect of coupled solid-fluid deformation on natural frequencies of fluid saturated porous plates, European Journal of Mechanics-A/Solids, Vol. 63, pp. 99-109, 2017.

[60]        F. Ebrahimi, S. Habibi, Deflection and vibration analysis of higher-order shear deformable compositionally graded porous plate, Steel Compos. Struct, Vol. 20, No. 1, pp. 205-225, 2016.

[61]        M. Panah, A. R. Khorshidvand, S. M. Khorsandijou, M. Jabbari, Pore pressure and porosity effects on bending and thermal postbuckling behavior of FG saturated porous circular plates, Journal of Thermal Stresses, Vol. 42, No. 9, pp. 1083-1109, 2019.

[62]        M. Galeban1a, A. Mojahedin, Y. Taghavi, M. Jabbari, Free vibration of functionally graded thin beams made of saturated porous materials, Steel and Composite Structures, Vol. 21, No. 5, pp. 999-1016, 2016.

[63]        A. Mojahedin, M. Jabbari, M. Salavati, Axisymmetric buckling of saturated circular porous-cellular plate based on first-order shear deformation theory, International Journal of Hydromechatronics, Vol. 2, No. 4, pp. 144-158, 2019.

[64]        A. Abjadi, M. Jabbari, R. A. Khorshidvand, Axisymmetric elasticity solution for an undrained saturated poro-piezoelastic thick disk, Theoretical and Applied Mechanics, Vol. 46, No. 2, pp. 191-219, 2019.

[65]        A. Mojahedin, M. Jabbari, A. Khorshidvand, M. Eslami, Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher order shear deformation theory, Thin-Walled Structures, Vol. 99, pp. 83-90, 2016.

[66]        M. Panah, A. Khorshidvand, S. Khorsandijou, M. Jabbari, Axisymmetric nonlinear behavior of functionally graded saturated poroelastic circular plates under thermo-mechanical loading, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 236, No. 8, pp. 4313-4335, 2022.

[67]        H. Babaei, M. Jabbari, M. R. Eslami, The effect of porosity on elastic stability of toroidal shell segments made of saturated porous functionally graded materials, Journal of Pressure Vessel Technology, Vol. 143, No. 3, 2021.

[68]        M. H. Sharifan, M. Jabbari, Mechanical buckling analysis of saturated porous functionally graded elliptical plates subjected to in-plane force resting on two parameters elastic foundation based on HSDT, Journal of Pressure Vessel Technology, Vol. 142, No. 4, pp. 041302, 2020.

[69]        M. Jabbari, M. Rezaei, A. Mojahedin, Mechanical buckling of FG saturated porous rectangular plate with piezoelectric actuators, Iranian Journal of Mechanical Engineering Transactions of the ISME, Vol. 17, No. 2, pp. 46-66, 2016.

[70]        M. Jabbari, M. Rezaei, A. Mojahedin, M. R. Eslami, Mechanical buckling of FG saturated porous rectangular plate under temperature field, Iranian Journal of Mechanical Engineering Transactions of the ISME, Vol. 17, No. 1, pp. 61-78, 2016.

[71]        A. Rezaei, A. Saidi, Exact solution for free vibration of thick rectangular plates made of porous materials, Composite Structures, Vol. 134, pp. 1051-1060, 2015.

[72]        A. Rezaei, A. Saidi, Buckling response of moderately thick fluid-infiltrated porous annular sector plates, Acta Mechanica, Vol. 228, No. 11, pp. 3929-3945, 2017.

[73]        M. Askari, A. R. Saidi, A. S. Rezaei, M. A. Badizi, Navier-type free vibration analysis of porous smart plates according to reddy’s plate theory, in Proceeding of, 13.

[74]        A. Rezaei, A. Saidi, An analytical study on the free vibration of moderately thick fluid-infiltrated porous annular sector plates, Journal of Vibration and Control, Vol. 24, No. 18, pp. 4130-4144, 2018.

[75]        E. S. Rad, A. Saidi, A. Rezaei, M. Askari, Shear deformation theories for elastic buckling of fluid-infiltrated porous plates: an analytical approach, Composite Structures, Vol. 254, pp. 112829, 2020.

[76]        H. Akbari, M. Azadi, H. Fahham, Free vibration analysis of thick sandwich cylindrical panels with saturated FG-porous core, Mechanics Based Design of Structures and Machines, Vol. 50, No. 4, pp. 1268-1286, 2022.

[77]        E. Arshid, A. R. Khorshidvand, Free vibration analysis of saturated porous FG circular plates integrated with piezoelectric actuators via differential quadrature method, Thin-Walled Structures, Vol. 125, pp. 220-233, 2018.

[78]        Z. Soleimani-Javid, E. Arshid, S. Amir, M. Bodaghi, On the higher-order thermal vibrations of FG saturated porous cylindrical micro-shells integrated with nanocomposite skins in viscoelastic medium, Defence Technology, 2021.

[79]        S. Amir, E. Arshid, M. R. G. Arani, Size-dependent magneto-electro-elastic vibration analysis of FG saturated porous annular/circular micro sandwich plates embedded with nano-composite face sheets subjected to multi-physical pre loads, Smart Structures and Systems, An International Journal, Vol. 23, No. 5, pp. 429-447, 2019.

[80]        M. Babaei, M. H. Hajmohammad, K. Asemi, Natural frequency and dynamic analyses of functionally graded saturated porous annular sector plate and cylindrical panel based on 3D elasticity, Aerospace Science and Technology, Vol. 96, pp. 105524, 2020.

[81]        F. Kiarasi, M. Babaei, K. Asemi, R. Dimitri, F. Tornabene, Three-dimensional buckling analysis of functionally graded saturated porous rectangular plates under combined loading conditions, Applied Sciences, Vol. 11, No. 21, pp. 10434, 2021.

[82]        M. Babaei, K. Asemi, P. Safarpour, Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory, Iranian Journal of Mechanical Engineering Transactions of the ISME, Vol. 20, No. 1, pp. 94-112, 2019.

[83]        M. Babaei, K. Asemi, P. Safarpour, Natural frequency and dynamic analyses of functionally graded saturated porous beam resting on viscoelastic foundation based on higher order beam theory, Journal of Solid Mechanics, Vol. 11, No. 3, pp. 615-634, 2019.

[84]        M. Babaei, K. Asemi, Stress analysis of functionally graded saturated porous rotating thick truncated cone, Mechanics Based Design of Structures and Machines, Vol. 50, No. 5, pp. 1537-1564, 2022.

[85]        M. Babaei, K. Asemi, F. Kiarasi, Dynamic analysis of functionally graded rotating thick truncated cone made of saturated porous materials, Thin-Walled Structures, Vol. 164, pp. 107852, 2021.

[86]        M. Babaei, K. Asemi, F. Kiarasi, Static response and free-vibration analysis of a functionally graded annular elliptical sector plate made of saturated porous material based on 3D finite element method, Mechanics Based Design of Structures and Machines, pp. 1-25, 2020.

[87]        E. ARSHID, A. KHORSHIDVAND, Flexural vibrations analysis of saturated porous circular plates using differential quadrature method, 2017.

[88]        K. Alhaifi, E. Arshid, A. R. Khorshidvand, Large deflection analysis of functionally graded saturated porous rectangular plates on nonlinear elastic foundation via GDQM, Steel and Composite Structures, An International Journal, Vol. 39, No. 6, pp. 795-809, 2021.

[89]        H. Wu, J. Yang, S. Kitipornchai, Mechanical analysis of functionally graded porous structures: A review, International Journal of Structural Stability and Dynamics, Vol. 20, No. 13, pp. 2041015, 2020.

[90]        A. Mojahedin, M. Jabbari, T. Rabczuk, Thermoelastic analysis of functionally graded porous beam, Journal of Thermal Stresses, Vol. 41, No. 8, pp. 937-950, 2018.

[91]        T. Q. Hung, D. M. Duc, T. M. Tu, Static Behavior of Functionally Graded Sandwich Beam with Fluid-Infiltrated Porous Core,  in: Modern Mechanics and Applications, Eds., pp. 691-706: Springer, 2022.

[92]        M. Heshmati, F. Daneshmand, Y. Amini, J. Adamowski, Vibration behavior of poroelastic thick curved panels with graded open-cell and saturated closed-cell porosities, European Journal of Mechanics-A/Solids, Vol. 77, pp. 103817, 2019.

[93]        A. G. Arani, Z. Khoddami Maraghi, M. Khani, I. Alinaghian, Free vibration of embedded porous plate using third-order shear deformation and poroelasticity theories, Journal of Engineering, Vol. 2017, 2017.

[94]        E. Arshid, S. Amir, A. Loghman, Bending and buckling behaviors of heterogeneous temperature-dependent micro annular/circular porous sandwich plates integrated by FGPEM nano-Composite layers, Journal of Sandwich Structures & Materials, Vol. 23, No. 8, pp. 3836-3877, 2021.

[95]        C. Cui, K. Meng, C. Xu, Z. Liang, H. Li, H. Pei, Analytical solution for longitudinal vibration of a floating pile in saturated porous media based on a fictitious saturated soil pile model, Computers and Geotechnics, Vol. 131, pp. 103942, 2021.

[96]        A. Mojahedin, E. F. Joubaneh, M. Jabbari, Thermal and mechanical stability of a circular porous plate with piezoelectric actuators, Acta Mechanica, Vol. 225, No. 12, pp. 3437-3452, 2014.