تعداد نشریات | 161 |
تعداد شمارهها | 6,532 |
تعداد مقالات | 70,502 |
تعداد مشاهده مقاله | 124,118,431 |
تعداد دریافت فایل اصل مقاله | 97,224,473 |
طراحی ساخت و ارزیابی فنی سامانه کنترل خودکار تغییر موقعیت حفاظ خاک روتیواتور | ||
مهندسی بیوسیستم ایران | ||
دوره 53، شماره 2، تیر 1401، صفحه 177-194 اصل مقاله (1.46 M) | ||
نوع مقاله: مقاله پژوهشی | ||
شناسه دیجیتال (DOI): 10.22059/ijbse.2022.333190.665451 | ||
نویسندگان | ||
فرزاد محمدی1؛ محمدرضا ملکی* 2؛ جلال خدائی2 | ||
1دانشجوی سابق کارشناسی ارشد گروه مهندسی بیوسیستم، دانشکده کشاورزی، دانشگاه کردستان، سنندج، ایران | ||
2استادیار گروه مهندسی بیوسیستم، دانشکده کشاورزی، دانشگاه کردستان، سنندج، ایران | ||
چکیده | ||
چکیده: در این مطالعه، یک سامانه الکترو-هیدرولیک برای تغییر موقعیت حفاظ خاک یک روتیواتور طراحی، ساخته و ارزیابی شد، تا بتوان از آن برای انجام خاکورزی نرخ متغیر بصورت خودکار استفاده کرد. جابجایی حفاظ خاک در حالت باز و بسته شدن از صفر تا 80 درجه و برعکس با گامهای 10 درجهای در آزمایشگاه و 20 درجهای در مزرعه بررسی شد. در شرایط آزمایشگاهی، میانگین سرعت تغییر موقعیت حفاظ خاک در حالت باز و بسته شدن به ترتیب 2/9±0/102 و 7/8±0/79 درجه بر ثانیه و میانگین زمان باز و بسته شدن به ترتیب02/0±11/0 و 01/0±15/0 ثانیه بهدست آمد. ضرایب تبیین حاصل از همبستگی موقعیت درخواستی حفاظ خاک و موقعیت ایجاد شده بهوسیله جک هیدرولیکی در آزمایشگاه در هر دو حالت باز و بسته شدن 99/0 با میانگین مربعات خطا 70/0 درجه بهدست آمد. در شرایط مزرعه، میانگین سرعت تغییر موقعیت حفاظ خاک در سه سرعت 6/2، 5/3 و 8/4 کیلومتر بر ساعت به ترتیب در حالت باز شدن 7/97، 1/99 و 1/99 و در حالت بسته شدن 3/77، 3/78 و 7/78 درجه بر ثانیه بهدست آمد. ضرایب تبیین همبستگی بین موقعیت درخواستی برای حفاظ خاک و موقعیت ایجاد شده توسط جک هیدرولیکی در هر دو حالت باز و بسته شدن 99/0 با میانگین مربعات خطا به ترتیب 2/1 و 3/1 درجه بهدست آمد. سامانه جابجایی حفاظ خاک میتواند حفاظ را در کمتر از 3/0 ثانیه در عملیات مزرعهای جابجا کند و میتوان آنرا بهعنوان ابزاری مؤثر و کاربردی برای انجام خاکورزی نرخ متغیر مورد استفاده قرار داد. | ||
کلیدواژهها | ||
اینکودر؛ سیگنال بازخورد؛ کشاورزیدقیق؛ الکترو-هیدرولیک؛ لبویو | ||
عنوان مقاله [English] | ||
Design, Development, and Technical Evaluation of an Automatic Controlling System for Repositioning of Rotary Tiller Soil Shield | ||
نویسندگان [English] | ||
Farzad Mohammadi1؛ Mohammad Reza Maleki2؛ Jalal Khodaei2 | ||
1Former student of Department of Biosystems Engineering, Faculty of Agriculture, University of Kurdistan, Sanandaj, Iran | ||
2Assistant Professor, Department of Biosystems Engineering, Faculty of Agriculture, University of Kurdistan, Sanandaj, Iran | ||
چکیده [English] | ||
Abstract: In the present study, an electro-hydraulic system for repositioning the soil shield of a rotary tiller was designed, developed, and evaluated to make it automated for performing variable rate tilling operation. The reposition of the soil shield was studied in the opening and closing stages from 0° to 80° and vice versa, with a 10° and 20° increment under laboratory and field conditions, respectively. Under laboratory conditions, the speed average of soil shield reposition in the opening and closing stages were 102.0±9.2 and 79.0±8.7 deg/s, with the time average in opening and closing stages of 0.11±0.02 and 0.15±0.01 s, respectively. The correlation coefficients between the requested position for the soil shield and the position created by the hydraulic actuator under laboratory conditions in both opening and closing states were R2 = 0.99 (RMSE = 0.7 deg). Under field conditions, the speed average of the soil shield reposition at three travel speeds of 2.6, 3.5, and 4.8 km/h in the opening stage were 97.7, 99.1, and 99.1 deg/s and in the closing stage were 77.3, 78.3, and 78.7 deg/s, respectively. The correlation between the requested position for the soil shield and the position created by the hydraulic actuator in both opening and closing states were R2 = 0.99 (RMSE = 1.2 deg) and R2=0.99 (RMES=1.3 deg), respectively. The soil shield repositioning system can be performed in less than 0.3 s in-field, making it an effective and practical tool for performing variable rate tillage. | ||
کلیدواژهها [English] | ||
Encoder, Feedback signal, Precision agriculture, Electro-hydraulic, LabVIEW | ||
مراجع | ||
Abbaspour-Gilandeh, Y., Alimardani, R., Khalilian, A., Keyhani, A. & Sadati, S.H. (2006). Energy requirement of site-specific and conventional tillage as affected by tractor speed and soil parameters. International Journal of Agriculture and Biology, 8, 499-503. Adamchuk, V.I., C.R. Hempleman, & Jahraus, D.G. (2009). On-the-go capacitance sensing of soil water content. Paper No. MC09-201. Transactions of the ASABE, St. Joseph, MI. Adamchuk, V.I., J.W. Hummel, M.T. Morgan, & S.K. Upadhyaya. (2004). On-the-go soil sensors for precision agriculture. Computers and Electronics in Agriculture, 44(1), 71-91. Adamchuk, V.I., Morgan, M.T. & Sumali, H. (2001). Application of a strain gauge array to estimate soil mechanical impedance on-the-go. American Society of Association Executives, 44(6), 1377–1383. Andrade-Sánchez, P., S.K. Upadhyaya, & Jenkins, B.M. (2007). Development, construction, and field evaluation of a soil compaction profile sensor. Transactions of the ASABE, 50, 719-725. Anthonis, J., Mouazen, A.M., Saeys, W. & Ramon, H. (2004). An automatic depth control system for online measurement of spatial variation in soil compaction, Part 3: Design of depth control system. Biosystems Engineering, 89(1), 59-67. Beh-Ayin, M.A. & Sheykhdavoudi, M.J. (2003). Effects of tractor speed and shield position on the performance of rotary tiller. The Scientific Journal of Agriculture, 25(2), 1-11. (in Farsi) Crummett, D. (2019). Variable intensity tillage offers solutions for varying soil conditions. In Niche Equipment Markets, Manufacturer News, available at: https://www.farm-equipment.com/articles/16770-variable-intensity-tillage-offers-solutions-for-varying-soil-conditions. Christy, C.D. (2008). Real-time measurement of soil attributes using on-the-go near infrared reflectance spectroscopy. Computers and Electronics in Agriculture, 61, 10–19. Elahifard, E., Shekofteh, M., Hojati, M.R. & Zhale Rokhi, M. (2008). Investigation of soil fragmentation in rotary tiller using artificial neural network method. In: Proceedings of 5th International Conference on Agricultural Machinery Engineering and Mechanization, 27-28 Aug, Ferdowsi University Mashhad, Mashhad, Iran. (in Farsi) Fallahi, E., Aghkhani, M.H. & Bayati, M.R. (2015). Design, construction and evaluation of the automatics position control system of tillage tools. Iranian Journal of Biosystem Engineering, 46(2), 117-123. (in Farsi) Gohari, M., Hemmat, A. & Afzal, A. (2010). Design, construction and evaluation of a variable-depth tillage implement equipped with a GPS. Iranian Journal of Biosystem Engineering, 41(1), 1-9. (in Farsi) Hemmat, A., & Adamchuk, V.I. (2008). Sensor systems for measuring soil compaction: Review and analysis. Computers and Electronics in Agriculture, 63, 89-103. Hussain, N., Farooque, A.A., Schumann, A.W., McKenzie-Gopsill, A., Esau, T., Abbas, F., Acharya, B. & Zaman, Q. (2020). Design and development of a smart variable rate sprayer using deep learning. Remote Sensing, 12(24), 4091, from https://doi.org/10.3390/rs12244091. Ji, W., Adamchuk, V., Biswas, A., Dhawale, N., Sudarsan, B., Zhang, Y., Viscarra Rossel, R. & Shi, Z. (2016). Assessment of soil properties in situ using a prototype portable MIR spectrometer in two agricultural fields. Biosystems Engineering, 152, 14-27. Jia, H., Guo, M., Yu, H., Li, Y., Feng, X., Zhao, J. & Qi, J. (2016). An adaptable tillage depth monitoring system for tillage machine. Biosystems Engineering, 151, 187-199. Kepner, R.A., Bainer, R., Barger, E.L., (1982). The principles of Farm Machinery. New York, John Wiley & Sons, Inc. 527 pp. Kheiralla, A.F., Yahya, A., Zohadie, M. and Ishak, W. (2004). Modelling of power and energy requirements for tillage implements operating in Serdang sandy clay loam, Malaysia. Soil and Tillage Research, 78, 21-34. Lee, J., Yamazaki, M., Oida, A., Nakashima, H. & Shimizu, H. (1998). Electro-hydraulic tillage depth control system for rotary implements mounted on agricultural tractor design and response experiments of control system. Journal of Terramechanics, 35, 229-238. Lee, J., Yamazaki, M., Oida, A., Nakashima, H. & Shimizu, H. (2000). Field performance of proposed foresight tillage depth control system for rotary implements mounted on an agricultural tractor. Journal of Terramechanics, 37, 99-111. Liu, W., Gaultney, L.D. & Morgan, M.T. (1993). Soil texture detection using acoustic methods. American Society of Association Executives, 93-1015. ASAE, St. Joseph, MI. Maleki, M.R., Mouazen, A.M., De Ketelaere, B., Ramon, H. & De Baerdemaeker, J. (2008). On-the-go variable rate phosphorus fertilization based on a visible and near-infrared soil sensor. Biosystems Engineering, 99 (1), 35 – 46. Mansourirad, D. (2013). Tractors and Agricultural Machinery (Vol.1). (7th ed.). Bu-Ali Sina Univercity Press. 853 P. (in Farsi) Marinello, F., Pezzuolo, A., Gasparini, F., Arvidsson, J. & Sartori, L. (2015). Application of the Kinect sensor for dynamic soil surface characterization. Precision. Agriculture, 16 (6), 601–612. Mohammadi, F., Maleki, M.R., & Khodaei, J. (2022a). Control of variable rate system of a rotary tiller based on real-time measurement of soil surface roughness. Soil and Tillage Research, 215, 105216. Mohammadi, F., Maleki, M.R., & Khodaei, J. (2022b). The effect of travel speed and the position of rotary tiller hood on soil surface roughness. Agricultural Mechanization, 6(4), 35-45. (in Farsi) Mouazen, A.M., Anthonis, J. & Ramon, H. (2005a). An automatic depth control system for online measurement of spatial variation in soil compaction, Part 4: Improvement of compaction maps by using a proportional integrative derivative depth controller. Biosystems Engineering, 90(4), 409-418. Mouazen, A.M., Anthonis, J., Saeys, W. & Ramon, H. (2004). An automatic depth control system for online measurement of spatial variation in soil compaction, Part 1: Sensor design for measurement of frame height variation from soil surface. Biosystems Engineering, 89(2), 139-150. Mouazen, A.M., De Baerdemaeker, J. & Ramon, H. (2005b). Towards development of on-the-go soil moisture content sensor using a fibre type NIR spectrophotometer. Soil and Tillage Research, 80, 171–183. Mouazen, A.M., Maleki, M.R., De Baerdemaeker, J. & Ramon H. (2007). On-line measurement of some selected soil properties using a VIS–NIR sensor. Soil and Tillage Research, 93(1), 13–27. Mouazen, A.M., & Ramon H. (2007). On Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content. Soil and Tillage Research, 86, 218-229. Rajabi-Vndchali, M., Hemmat, A. & Ghanbari Malidarreh, A. (2015). Field performance of the disk harrow, power harrow and rotary tiller at different soil moisture contents on a clay loam soil in Mazandaran. Journal of Agricultural Machinery, 5(1), 63-72. (in Farsi) Ribeiro Mendes, W., Araújo, F.M.U., Dutta, R. & Heeren, D.M. (2019). Fuzzy control system for variable rate irrigation using remote sensing. Expert Systems with Applications, 124(15), 13-24. Riegler-Nurscher, P., Moitzi, G., Moitzi, J., Huber, J., Karner, J., Wagentristl, H. & Wagentristl, M. (2020). Machine vision for soil roughness measurement and control of tillage machines during seedbed preparation. Soil and Tillage Research, 196, 104351, from https://doi.org/10.1016/j.still.2019.104351. Saeys, W., Mouazen, A.M., Anthonis, J. & Ramon, H. (2004). An automatic depth control system for online measurement of spatial variation in soil compaction, Part 2: Modelling of the depth control system. Biosystems Engineering, 89(3), 267-280. Schule, T. and Koller, K. (2008). Erosion control by using site-specific tillage. Bulletin of the University of Agricultural Sciences and Veterinary Medicine Cluj-Napoca Agriculture, 65(1), 259-263. Sedghi, R. & Abbaspour Gilandeh, Y. (2014). Factors affecting soil fragmentation during tillage practice and determining the optimal range of the parameters using a fuzzy logic approach. Journal of Agriculture Engineering, 37(1), 35-47. (in Farsi) Shinde, G.U. & Kajale, S.R. (2011). Computer aided engineering analysis and design optimization of rotary tillage tool components. International Journal of Agricultural and Biological Engineering, 4(3), 1-6. Siefken, R.J., Adamchuk, V.I., Eisenhauer, D.E. & Bashford, L.L. (2005). Mapping soil mechanical resistance with a multiple blade system. Engineering in Agriculture, 21(1), 15-23. Sirjacobs, D., Hanquet, B., Lebeau, F. & Destain, M.F. (2002). On-line soil mechanical resistance mapping and correlation with soil physical properties for precision agriculture. Soil and Tillage Research, 64(3-4), 231-242. Tabatabae koloor, R. & Kiani, Gh. (2011). Investigation of the rototiller blades operational factors on the orchards and paddy fields tillage. Journal of Agricultural Machinery Engineering, 1(1), 34-40. (in Farsi) Tekeste, M.Z., Grift, T.E. & Raper, R.L. (2002). Acoustic compaction layer detection. ASAE Paper No. 02-1089. American Society of Agricultural Engineers, St. Joseph, MI. Viscarra Rossel, R.A., Walvoort, D.J.J., McBratney, A.B., Janik, L.J. & Skjemstad, J.O. (2006). Visible, near infrared, mid infrared or combined diffuse reflectance spectroscopy for simultaneous assessment of various soil properties. Geoderma, 131(1-2), 59-75. Waiser, T.H., Morgan, C.L.S. & Brown, D.J. (2007). In situ characterization of soil clay content with visible near infrared diffuse reflectance spectroscopy. Soil Science Society of America Journal, 71, 389-396. | ||
آمار تعداد مشاهده مقاله: 387 تعداد دریافت فایل اصل مقاله: 292 |