پیوندهای مفید
اخبار و اعلانات
آمار
| تعداد نشریات | 161 |
| تعداد شمارهها | 6,532 |
| تعداد مقالات | 70,501 |
| تعداد مشاهده مقاله | 124,112,283 |
| تعداد دریافت فایل اصل مقاله | 97,216,075 |
Static stability analysis of FG thick plate supported by three parameters foundation under general boundary conditions | ||
| Journal of Computational Applied Mechanics | ||
| مقاله 5، دوره 55، شماره 3، مهر 2024، صفحه 381-400 اصل مقاله (790.6 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22059/jcamech.2024.375018.1040 | ||
| نویسندگان | ||
| Abdeldjallil Meksi1؛ Rabbab Bachir Bouiadjra2، 3؛ Samir Benyoucef2؛ Abdelhakim Bouhadra* 2، 4؛ Mohamed Bourada2؛ Mofareh Ghazwani5؛ Abdelouahed Tounsi2، 6 | ||
| 1Department of Civil Engineering, Faculty of Architecture and Civil Engineering, University of Sciences and Technology Mohamed Boudiaf, Oran 31000, Algeria | ||
| 2Material and Hydrology Laboratory, Civil Engineering Department, Faculty of Technology, Djillali Liabes University, Sidi Bel Abbes 22000, Algeria | ||
| 3Department of Civil Engineering, University Mustapha Stambouli of Mascara 29000, Algeria | ||
| 4Department of Mechanical Engineering, Faculty of Science and Technology, Abbes Laghrour University, Khenchela 40000, Algeria | ||
| 5Department of Mechanical Engineering, Faculty of Engineering, Jazan University, P.O Box 45124, Jazan, Kingdom of Saudia Arabia | ||
| 6Department of Civil and Environmental Engineering, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Eastern Province, Saudi Arabia | ||
| چکیده | ||
| In this paper, an analytical solution for exploring the buckling characteristics of functionally graded (FG) plate is presented based on a quasi-3D shear deformation theory. It is considered that the plate is subjected to different types of in-plane compressive load. The FG plate is placed on three-parameter foundation Winkler-Pasternak-Kerr. The overall material properties of FG plate are assumed to be varied across the thickness and are estimated through the Voigt micromechanical model. The governing equations are obtained on the base of the quasi-3D deformation theory that contain undetermined integral forms and involves only four unknowns to derive. Equations of motion are derived from the principal of virtual work and the analytical solution is used to determine the critical buckling loads. By the discussion of numerical examples and the comparison with those of the reports in the literature, the convergence and the reliability of the present approach are validated. Finally, the parametric investigations of the in-plane buckling are carried out, including the influence of boundary conditions, elastic foundation, plate geometric parameters and power law index. The results reveal that the critical buckling loads are strongly influenced by several parameters such as boundary conditions, elastic foundation parameters and geometric shape of the plate. | ||
| کلیدواژهها | ||
| Mechanical Buckling؛ In-plane Compressive Load؛ Plate؛ Elastic Foundation؛ Boundary Conditions | ||
| مراجع | ||
|
[1] A. Naderi, A. Saidi, An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates, Archive of Applied Mechanics, Vol. 81, pp. 809-828, 2011.
[2] V. R. Kar, S. K. Panda, Nonlinear flexural vibration of shear deformable functionally graded spherical shell panel, Steel Compos. Struct, Vol. 18, No. 3, pp. 693-709, 2015.
[3] M. Avcar, Free vibration of imperfect sigmoid and power law functionally graded beams, Steel and Composite Structures, An International Journal, Vol. 30, No. 6, pp. 603-615, 2019.
[4] A. Selmi, Exact solution for nonlinear vibration of clamped-clamped functionally graded buckled beam, Smart Structures and Systems, An International Journal, Vol. 26, No. 3, pp. 361-371, 2020.
[5] M. Vinyas, On frequency response of porous functionally graded magneto-electro-elastic circular and annular plates with different electro-magnetic conditions using HSDT, Composite Structures, Vol. 240, pp. 112044, 2020.
[6] E. Madenci, A refined functional and mixed formulation to static analyses of fgm beams, Structural Engineering and Mechanics, An Int'l Journal, Vol. 69, No. 4, pp. 427-437, 2019.
[7] M. A. Attia, On the mechanics of functionally graded nanobeams with the account of surface elasticity, International Journal of Engineering Science, Vol. 115, pp. 73-101, 2017.
[8] M. S. Sari, S. Ghaffari, S. Ceballes, A. Abdelkefi, Buckling response of functionally graded nanoplates under combined thermal and mechanical loadings, Journal of Nanoparticle Research, Vol. 22, pp. 1-21, 2020.
[9] M. Taczała, R. Buczkowski, M. Kleiber, Nonlinear buckling and post-buckling response of stiffened FGM plates in thermal environments, Composites Part B: Engineering, Vol. 109, pp. 238-247, 2017.
[10] P. T. Thang, T. Nguyen-Thoi, D. Lee, J. Kang, J. Lee, Elastic buckling and free vibration analyses of porous-cellular plates with uniform and non-uniform porosity distributions, Aerospace science and technology, Vol. 79, pp. 278-287, 2018.
[11] D. Chen, J. Yang, S. Kitipornchai, Buckling and bending analyses of a novel functionally graded porous plate using Chebyshev-Ritz method, Archives of Civil and Mechanical Engineering, Vol. 19, No. 1, pp. 157-170, 2019.
[12] W. G. Abdelrahman, Effect of material transverse distribution profile on buckling of thick functionally graded material plates according to TSDT, Structural Engineering and Mechanics, An Int'l Journal, Vol. 74, No. 1, pp. 83-90, 2020.
[13] A. Cutolo, V. Mallardo, M. Fraldi, E. Ruocco, Third-order nonlocal elasticity in buckling and vibration of functionally graded nanoplates on Winkler-Pasternak media, Annals of Solid and Structural Mechanics, Vol. 12, pp. 141-154, 2020.
[14] V. N. Van Do, K.-H. Chang, C.-H. Lee, Post-buckling analysis of FGM plates under in-plane mechanical compressive loading by using a mesh-free approximation, Archive of Applied Mechanics, Vol. 89, pp. 1421-1446, 2019.
[15] T. I. Thinh, T. M. Tu, T. H. Quoc, N. V. Long, Vibration and buckling analysis of functionally graded plates using new eight-unknown higher order shear deformation theory, Latin American Journal of Solids and Structures, Vol. 13, pp. 456-477, 2016.
[16] S.-C. Yi, L.-Q. Yao, B.-J. Tang, A novel higher-order shear and normal deformable plate theory for the static, free vibration and buckling analysis of functionally graded plates, Mathematical Problems in Engineering, Vol. 2017, 2017.
[17] V. R. Kar, S. K. Panda, Post-buckling behaviour of shear deformable functionally graded curved shell panel under edge compression, International Journal of Mechanical Sciences, Vol. 115, pp. 318-324, 2016.
[18] V. Singh, R. Kumar, S. Patel, N. Roy, Nonlinear response and buckling of imperfect plates under in-plane pulse forces: A semi-analytical investigation, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 46, No. 3, pp. 633-648, 2022.
[19] Z. Kolakowski, L. Czechowski, Non-linear stability of the in-plane functionally graded (FG) plate, Composite Structures, Vol. 214, pp. 264-268, 2019.
[20] P. H. Cong, T. M. Chien, N. D. Khoa, N. D. Duc, Nonlinear thermomechanical buckling and post-buckling response of porous FGM plates using Reddy's HSDT, Aerospace Science and Technology, Vol. 77, pp. 419-428, 2018.
[21] A. Tamrabet, C. Mourad, N. Ali Alselami, A. Menasria, B. Mamen, A. Bouhadra, Efficient Kinematic model for Stability Analysis of Imperfect Functionally Graded Sandwich Plates with Ceramic middle layer and Varied Boundary Edges, Journal of Computational Applied Mechanics, 2024.
[22] R. Slimani, A. Menasria, M. Ali Rachedi, C. Mourad, S. Refrafi, A. A. Nimer, A. Bouhadra, B. Mamen, A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates, Journal of Computational Applied Mechanics, 2024.
[23] S. REFRAFI, A. BOUTRID, A. BOUHADRA, A. MENASRIA, B. MAMEN, QUASI-3D ANALYTIC MODEL FOR FREE VIBRATION ANALYSIS OF SIMPLY SUPPORTED FUNCTIONALLY GRADED PLATES (SS-FGP).
[24] A. Messaoudi, A. Bouhadra, A. Menasria, B. Mamen, B. Boucham, M. Benguediab, A. Tounsi, M. Al-Osta, Impact of the Shear and Thickness Stretching Effects on the Free Vibrations of Advanced Composite Plates, Mechanics of Composite Materials, Vol. 59, No. 5, pp. 1001-1018, 2023.
[25] D. Shahsavari, B. Karami, H. R. Fahham, L. Li, On the shear buckling of porous nanoplates using a new size-dependent quasi-3D shear deformation theory, Acta Mechanica, Vol. 229, pp. 4549-4573, 2018.
[26] M. Bodaghi, A. Saidi, Stability analysis of functionally graded rectangular plates under nonlinearly varying in-plane loading resting on elastic foundation, Archive of Applied Mechanics, Vol. 81, pp. 765-780, 2011.
[27] S. Singh, S. P. Harsha, Buckling analysis of FGM plates under uniform, linear and non-linear in-plane loading, Journal of Mechanical Science and Technology, Vol. 33, pp. 1761-1767, 2019.
[28] M. Mohammadi, A. Farajpour, M. Goodarzi, Numerical study of the effect of shear in-plane load on the vibration analysis of graphene sheet embedded in an elastic medium, Computational Materials Science, Vol. 82, pp. 510-520, 2014.
[29] M. Mohammadi, A. Farajpour, M. Goodarzi, F. Dinari, Thermo-mechanical vibration analysis of annular and circular graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, pp. 659-682, 2014.
[30] M. Mohammadi, A. Moradi, M. Ghayour, A. Farajpour, Exact solution for thermo-mechanical vibration of orthotropic mono-layer graphene sheet embedded in an elastic medium, Latin American Journal of Solids and Structures, Vol. 11, pp. 437-458, 2014.
[31] M. Mohammadi, M. Safarabadi, A. Rastgoo, A. Farajpour, Hygro-mechanical vibration analysis of a rotating viscoelastic nanobeam embedded in a visco-Pasternak elastic medium and in a nonlinear thermal environment, Acta Mechanica, Vol. 227, pp. 2207-2232, 2016.
[32] C. Chu, M. Al-Furjan, R. Kolahchi, A. Farrokhian, A nonlinear Chebyshev-based collocation technique to frequency analysis of thermally pre/post-buckled third-order circular sandwich plates, Communications in Nonlinear Science and Numerical Simulation, Vol. 118, pp. 107056, 2023.
[33] M. Al-Furjan, Z. Qi, L. Shan, A. Farrokhian, X. Shen, R. Kolahchi, Nano supercapacitors with practical application in aerospace technology: Vibration and wave propagation analysis, Aerospace Science and Technology, Vol. 133, pp. 108082, 2023.
[34] P. Wan, M. Al-Furjan, R. Kolahchi, L. Shan, Application of DQHFEM for free and forced vibration, energy absorption, and post-buckling analysis of a hybrid nanocomposite viscoelastic rhombic plate assuming CNTs’ waviness and agglomeration, Mechanical Systems and Signal Processing, Vol. 189, pp. 110064, 2023.
[35] M. Al-Furjan, S. Fan, L. Shan, A. Farrokhian, X. Shen, R. Kolahchi, Wave propagation analysis of micro air vehicle wings with honeycomb core covered by porous FGM and nanocomposite magnetostrictive layers, Waves in Random and Complex Media, pp. 1-30, 2023.
[36] L. Shan, C. Tan, X. Shen, S. Ramesh, M. Zarei, R. Kolahchi, M. Hajmohammad, The effects of nano-additives on the mechanical, impact, vibration, and buckling/post-buckling properties of composites: A review, Journal of Materials Research and Technology, 2023.
[37] C. Chu, L. Shan, M. Al-Furjan, A. Farrokhian, R. Kolahchi, Energy absorption, free and forced vibrations of flexoelectric nanocomposite magnetostrictive sandwich nanoplates with single sinusoidal edge on the frictional torsional viscoelastic medium, Archives of Civil and Mechanical Engineering, Vol. 23, No. 4, pp. 223, 2023.
[38] C. Chu, M. Al-Furjan, R. Kolahchi, Energy harvesting and dynamic response of SMA nano conical panels with nanocomposite piezoelectric patch under moving load, Engineering Structures, Vol. 292, pp. 116538, 2023.
[39] P. Wan, M. Al-Furjan, R. Kolahchi, Nonlinear flutter response and reliability of supersonic smart hybrid nanocomposite rupture trapezoidal plates subjected to yawed flow using DQHFEM, Aerospace Science and Technology, Vol. 145, pp. 108862, 2024.
[40] R. Kolahchi, B. Keshtegar, N.-T. Trung, Optimization of dynamic properties for laminated multiphase nanocomposite sandwich conical shell in thermal and magnetic conditions, Journal of Sandwich Structures & Materials, Vol. 24, No. 1, pp. 643-662, 2022.
[41] M. Motezaker, R. Kolahchi, D. K. Rajak, S. Mahmoud, Influences of fiber reinforced polymer layer on the dynamic deflection of concrete pipes containing nanoparticle subjected to earthquake load, Polymer Composites, Vol. 42, No. 8, pp. 4073-4081, 2021.
[42] M. H. Hajmohammad, A. Farrokhian, R. Kolahchi, Dynamic analysis in beam element of wave-piercing Catamarans undergoing slamming load based on mathematical modelling, Ocean Engineering, Vol. 234, pp. 109269, 2021.
[43] M. Al-Furjan, M. H. Hajmohammad, X. Shen, D. K. Rajak, R. Kolahchi, Evaluation of tensile strength and elastic modulus of 7075-T6 aluminum alloy by adding SiC reinforcing particles using vortex casting method, Journal of Alloys and Compounds, Vol. 886, pp. 161261, 2021.
[44] M. Al-Furjan, M. Xu, A. Farrokhian, G. S. Jafari, X. Shen, R. Kolahchi, On wave propagation in piezoelectric-auxetic honeycomb-2D-FGM micro-sandwich beams based on modified couple stress and refined zigzag theories, Waves in Random and Complex Media, pp. 1-25, 2022.
[45] M. Al‐Furjan, Y. Yang, A. Farrokhian, X. Shen, R. Kolahchi, D. K. Rajak, Dynamic instability of nanocomposite piezoelectric‐leptadenia pyrotechnica rheological elastomer‐porous functionally graded materials micro viscoelastic beams at various strain gradient higher‐order theories, Polymer Composites, Vol. 43, No. 1, pp. 282-298, 2022.
[46] M. Al-Furjan, C. Yin, X. Shen, R. Kolahchi, M. S. Zarei, M. Hajmohammad, Energy absorption and vibration of smart auxetic FG porous curved conical panels resting on the frictional viscoelastic torsional substrate, Mechanical Systems and Signal Processing, Vol. 178, pp. 109269, 2022.
[47] M. Al-Furjan, L. Shan, X. Shen, R. Kolahchi, D. K. Rajak, Combination of FEM-DQM for nonlinear mechanics of porous GPL-reinforced sandwich nanoplates based on various theories, Thin-Walled Structures, Vol. 178, pp. 109495, 2022.
[48] M. Al-Furjan, L. Shan, X. Shen, M. Zarei, M. Hajmohammad, R. Kolahchi, A review on fabrication techniques and tensile properties of glass, carbon, and Kevlar fiber reinforced rolymer composites, Journal of Materials Research and Technology, Vol. 19, pp. 2930-2959, 2022.
[49] C. Chu, L. Shan, M. Al-Furjan, M. Zarei, M. Hajmohammad, R. Kolahchi, Experimental study for the effect of hole notched in fracture mechanics of GLARE and GFRP composites subjected to quasi-static loading, Theoretical and Applied Fracture Mechanics, Vol. 122, pp. 103624, 2022.
[50] M. Al-Furjan, R. Kolahchi, L. Shan, M. Hajmohammad, A. Farrokhian, X. Shen, Slamming impact induced hydrodynamic response in wave-piercing catamaran beam elements with controller, Ocean Engineering, Vol. 266, pp. 112908, 2022.
[51] F. Achouri, S. Benyoucef, F. Bourada, R. B. Bouiadjra, A. Tounsi, Robust quasi 3D computational model for mechanical response of FG thick sandwich plate, Struct. Eng. Mech, Vol. 70, No. 5, pp. 571-589, 2019.
[52] M. A. A. Meziane, H. H. Abdelaziz, A. Tounsi, An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions, Journal of Sandwich Structures & Materials, Vol. 16, No. 3, pp. 293-318, 2014.
[53] M. Mekerbi, S. Benyoucef, A. Mahmoudi, A. Tounsi, A. A. Bousahla, S. Mahmoud, Thermodynamic behavior of functionally graded sandwich plates resting on different elastic foundation and with various boundary conditions, Journal of Sandwich Structures & Materials, Vol. 23, No. 3, pp. 1028-1057, 2021.
[54] S. A. Asiri, Ş. D. Akbaş, M. A. Eltaher, Damped dynamic responses of a layered functionally graded thick beam under a pulse load, Structural Engineering and Mechanics, An Int'l Journal, Vol. 75, No. 6, pp. 713-722, 2020.
[55] A. Boulal, T. Bensattalah, A. Karas, M. Zidour, H. Heireche, E. A. Bedia, Buckling of carbon nanotube reinforced composite plates supported by Kerr foundation using Hamilton's energy principle, Structural Engineering and Mechanics, An Int'l Journal, Vol. 73, No. 2, pp. 209-223, 2020.
[56] M. A. Eltaher, Ş. D. Akbaş, Transient response of 2D functionally graded beam structure, Structural Engineering and Mechanics, An Int'l Journal, Vol. 75, No. 3, pp. 357-367, 2020.
[57] P. V. Katariya, S. K. Panda, Numerical analysis of thermal post-buckling strength of laminated skew sandwich composite shell panel structure including stretching effect, Steel and Composite Structures, An International Journal, Vol. 34, No. 2, pp. 279-288, 2020.
[58] M. Yaylacı, Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane, Structural Engineering and Mechanics, An Int'l Journal, Vol. 72, No. 6, pp. 775-783, 2019.
[59] K. Mehar, S. K. Panda, Nonlinear deformation and stress responses of a graded carbon nanotube sandwich plate structure under thermoelastic loading, Acta Mechanica, Vol. 231, No. 3, pp. 1105-1123, 2020.
[60] O. Civalek, M. Jalaei, Buckling of carbon nanotube (CNT)-reinforced composite skew plates by the discrete singular convolution method, Acta Mechanica, Vol. 231, pp. 2565-2587, 2020. | ||
|
آمار تعداد مشاهده مقاله: 294 تعداد دریافت فایل اصل مقاله: 355 |
||